Warning - Electrical Safety Information - Xerox Phaser 3200MFP User Manual

Xerox phaser 3200mfp: user guide
Hide thumbs Also See for Phaser 3200MFP:
Table of Contents

Advertisement

WARNING - Electrical Safety Information

Xerox Phaser 3200MFP
Operator Accessible Areas
This equipment has been designed to restrict operator access to safe areas
only. Operator access to hazardous areas is restricted with covers or guards,
which would require a tool to remove. Never remove these covers or guards.
Maintenance
Any operator product maintenance procedures will be described in the user
documentation supplied with the product. Do not carry out any maintenance
on this product which is not described in the customer documentation.
Cleaning Your Product
Before cleaning this product, unplug the product from the electrical outlet.
Always use materials specifically designated for this product. The use of other
materials may result in poor performance and may create a hazardous
situation. Do not use aerosol cleaners, they may be explosive and flammable
under certain circumstances.
Only Use the power cord supplied with this equipment.
Plug the power cord directly into a grounded electrical outlet. Do not use
an extension cord. If you do not know whether or not an outlet is
grounded, consult a qualified electrician.
Improper connection of the equipment-grounding conductor can result in
electrical shock.
Do not place this equipment where people might step on or trip on the
power cord.
Do not override or disable electrical or mechanical interlocks.
Do not obstruct the ventilation openings.
Never push objects of any kind into slots or openings on this equipment
If any of the following conditions occur, switch off the power to the
machine immediately and disconnect the power cord from the electrical
outlet. Call an authorized local service representative to correct the
problem.
– The equipment emits unusual noise or odors.
– The power cord is damaged or frayed.
– A wall panel circuit breaker, fuse, or other safety device has been
tripped.
– Liquid is spilled into the copier/printer.
– The equipment is exposed to water.
– Any part of the equipment is damaged.
1 Welcome
1-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 3200mfp/bPhaser 3200mfp/n

Table of Contents