Making Copies On The Document Glass - Xerox Phaser 3200MFP User Manual

Making Copies on the Document Glass

Xerox Phaser 3200MFP
1.
Lift and open the document cover.
2.
Place the document face down
on the document glass and align it
at the top left corner of the glass.
NOTE:
• Make sure that no documents are
in the ADF (Automatic Document
Feeder). If a document is detected
in the ADF, the machine gives it
priority over the document on the
document glass.
• Only letter, A4 sized print materials
can be placed in the Document
Glass.
3.
Close the document cover.
NOTE:
• Lower the document cover gently to avoid damage to the machine or
personal injury.
• If you leave the cover open while copying you may affect copy quality and
toner consumption.
• If you are copying a page from a book or magazine, leave the cover open.
4.
Press the Copy button to enter the copy mode.
5.
Select the copy settings including number of copies, copy size,
brightness, and original type, by using the control panel buttons. See
Selecting Copy Options on page 5-5.
To clear the settings, use the Stop/Clear button.
6.
If necessary, you can use special copy features, such as Poster, Auto Fit,
Clone, and ID Card copying. See Special Copy Features on page 5-7
7.
Press Start to begin copying. The display shows the copy processing.
5 Copying
5-3