Changing The Dial Mode; Setting The Paper Size And Type - Xerox Phaser 3200MFP User Manual

Changing the Dial Mode

Setting the Paper Size and Type

Xerox Phaser 3200MFP
This setting may not be available depending on your country. If you cannot
reach this option, your machine does not support this feature.
You can set the dial mode for your machine to either tone dialling or pulse
dialling. If you have a public telephone system or a private branch exchange
(PBX) system, you may need to select Pulse. Contact your local telephone
company if you are not sure which dial mode to use. If you select Pulse, some
phone system features might not be available. It can also take longer to dial a
fax or phone number.
1.
Press Menu until "Machine Setup" appears on the top line of the display.
1.
Press the scroll button ( or ) until you see "Dial Mode" on the bottom
line and press Enter.
2.
The dial mode currently set for the machine displays.
3.
Press the scroll button ( or ) until the desired status appears and press
Enter.
To return to Standby mode, press Stop/Clear.
After loading paper in the tray, you need to set the paper size and type using
the control panel buttons. These settings will apply to copy and fax modes. For
PC-printing, you need to select the paper size and type in the print driver you
use on your PC.
1.
Press Menu. The display shows "Paper Setting" on the top line of the
display.
2.
Press the scroll button ( or ) to display "Paper Size" on the bottom line
and press Enter to access the menu item.
3.
Use the scroll button ( or ) to find the paper size you are using and
press Enter to save it.
4.
Press the button to scroll to "Paper Type" and press Enter to access
the menu item.
5.
Use the scroll button ( or ) to find the paper type you are using and
press Enter to save it.
6.
To return to Standby mode, press Stop/Clear.
2 Getting Started
2-19