Scanning Using A Network Connection (Phaser 3200Mfp/N Only); Preparing For Network Scanning - Xerox Phaser 3200MFP User Manual

Scanning using a network connection
(Phaser 3200MFP/N only)
Xerox Phaser 3200MFP
If you have connected your machine to a network and set up network
parameters correctly, you can scan and send images over the network.

Preparing for network scanning

Before using your machine's network scanning features, you need to add the
machine to the Network Scan program for scanning to a network client.
Adding the machine to the Network Scan program
First, install the Network Scan program. See Installing Printer Software in
Windows on page 6-2.
To scan images from your machine to your computer through the network, you
need to register the machine as an authorized network scanner in the
Network Scan program.
1.
In Windows, select Start
Network Scan.
The Xerox Network Scan Manager window opens.
2.
Click the Add Device button or double-click the Add Device icon.
3.
Click Next.
4.
Select Browse for a scanner. (recommended), or select Connect to
this scanner. and enter the IP address of your machine.
5.
Click Next.
A list of the scanners on your network appears.
6.
Select your machine from the list and enter a name, user ID, and PIN
(Personal Identification Number) for the machine.
NOTE:
For the scanner name, the model name of your machine is
automatically entered, but can be changed.
You can enter an ID of up to 8 characters. The first character must be a letter.
The PIN must be 4 digits.
7.
Click Next.
8.
Click Finish.
Your machine is added to the Network Scan program and you can now
scan images through the network.
Programs Xerox
7 Scanning
Network Scan
7-5