Installing The Print Cartridge - Xerox Phaser 3200MFP User Manual

2 Getting Started

Installing the Print Cartridge

2-4
1.
Open the front door.
2.
Remove the Print Cartridge
from its bag and remove the paper
protecting the cartridge by pulling the
packing tape.
3.
Thoroughly rock the cartridge 5 or 6
times to distribute the toner. This will
loosen the toner and make sure that
you get the maximum copies from the
cartridge.
NOTE:
If toner gets on your clothing, wipe it
off with a dry cloth and wash clothing in cold
water. Hot water sets toner into fabric.
CAUTION:
To prevent damage, do not expose the Print Cartridge to
light for more than a few minutes. Cover it with a piece of paper if left
exposed for more than a few minutes.
CAUTION:
Do not touch the green underside of the Print Cartridge. Use
the handle on the cartridge when lifting the cartridge to avoid touching
this area.
Xerox Phaser 3200MFP