Xerox Phaser 3200MFP User Manual page 200

Xerox phaser 3200mfp: user guide
Hide thumbs Also See for Phaser 3200MFP:
Table of Contents

Advertisement

10 Troubleshooting
Display
Stop Pressed
Toner Empty
Toner Low
Hsync Error
Scan Stopped
Aborting..
Send Error (SMTP)
SMTP Server
CONN. Failure
Send Error (DNS)
Authentication
Failure
Invalid SMTP
Account
Authentication
Required
Send Stopped
10-12
Meaning
The Stop/Clear button
has been pressed
during a copy or fax
operation.
The print cartridge has
run out.
The toner is almost
empty.
There is a serious
problem in your
machine.
The Stop/Clear button
has been pressed
during a network
scanning job.
Scan to email job is
aborted by pressing
Stop/Clear button.
There is a problem in
SMTP.
There is a problem in
DNS.
Invalid SMTP acconut
or password entered by
the user.
Invalid account is
entered.
There is a problem in
SMTP authentication.
The Stop/Clear button
has been pressed
during a sending mail.
Suggested Solutions
Try again.
Replace the print cartridge with
Replacing the
a new one. See
Print Cartridge on page 9-7
Note: A used cartridge will not
reset this message.
Take out the print cartridge and
gently shake it. By doing this,
you can temporarily re-establish
printing operations. See
Redistributing Print Cartridge
Toner on page 9-6
.
Turn the machine off and back
on. If the problem persists,
please call for service.
Try again.
Try again.
Change to the available server.
Configure the DNS setting.
Enter the correct acconut or
password.
Enter the correct acconut.
Configure the authentication
setting.
Try again.
Xerox Phaser 3200MFP
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 3200mfp/bPhaser 3200mfp/n

Table of Contents