Using Your Machine With A Macintosh (Phaser 3200Mfp/N Only); Installing Software For Macintosh; Install The Printer Driver - Xerox Phaser 3200MFP User Manual

6 Printing
Using Your Machine with a Macintosh

Installing Software for Macintosh

6-46
Your machine supports Macintosh systems with a built-in USB interface or a
10/100 Base-TX network interface card. When you print a file from a
Macintosh computer, you can use the PostScript driver by installing the PPD
file.
The PostScript driver CD-ROM that came with your machine provides you with the
PPD file to use the PS driver, Apple LaserWriter driver, for printing on a Macintosh
computer.
Also, it provides you with the TWAIN driver for scanning on a Macintosh
computer.
Verify the following before you install the printer software:
Item
Operating System
RAM
Free Disk Space

Install the Printer driver

1.
Connect your machine to the computer using the USB cable or the
Ethernet cable.
2.
Turn on your computer and the machine.
3.
Insert the PostScript driver CD-ROM which came with your machine into
the CD-ROM drive.
4.
Double-click the Xerox MFP on your Macintosh desktop.
5.
Double-click the MAC_Installer folder.
6.
Double-click the MAC_Printer folder.
7.
Double-click the Xerox Phaser 3200MFP_OSX icon.
8.
Click Continue.
9.
Click Install.
10.
After the installation is finished, click Quit.
(Phaser 3200MFP/N only)
Requirements
Mac OS 10.3 ~ 10.4
128 MB
200 MB
Xerox Phaser 3200MFP