Xerox Phaser 3200MFP User Manual page 198

10 Troubleshooting
Display
Incompatible
Line Busy
Line Error
Load Document
LSU Error
Memory Dial Full
Memory Full
No Answer
10-10
Meaning
The remote machine
did not have the
requested feature, such
as a delayed
transmission.
This message also
occurs if the remote
machine does not have
enough memory space
to complete the
operation you are
attempting.
The receiving party did
not answer or the line is
already engaged.
Your machine cannot
connect with the remote
machine or has lost
contact because of a
problem with the phone
line.
You have attempted to
set up a copy or fax
operation with no
document loaded into
the ADF.
A problem has occurred
in the LSU (Laser
Scanning Unit).
The fax jobs queue in
the memory is full.
The memory is full.
The receiving fax
machine has not
answered after several
redial attempts.
Suggested Solutions
Reconfirm the remote
machine's features.
Try again after a few minutes.
Try again. If the problem
persists, wait approximately one
hour for the line to clear and try
again.
Or, turn the ECM mode on. See
ECM Mode (Error Correction
Mode) on page 8-26
.
Load a document into the ADF
and try again.
Turn power off and wait 10
seconds. Turn power on. If the
problem persists, call for
service.
Cancel unnecessary fax jobs in
the memory.
Delete unnecessary documents
and retransmit after more
memory becomes available.
Alternatively, split the
transmission into more than one
operation.
Try again. Make sure that the
receiving machine is
operational.
Xerox Phaser 3200MFP