Envelopes - Xerox Phaser 3200MFP User Manual

Envelopes

Xerox Phaser 3200MFP
Envelope construction is critical. Envelope fold lines can vary considerably,
not only between manufacturers, but also within a box from the same
manufacturer. Successful printing on envelopes depends upon the quality of
the envelopes. When selecting envelopes, consider the following
components:
• Weight: The weight of the envelope paper should not exceed 20 lb (75 g/
2
m ) or jamming may occur.
• Construction: Prior to printing, envelopes should lie flat with less than 0.25
inches (6 mm) curl, and should not contain air.
• Condition: Envelopes should not be wrinkled, nicked or otherwise
damaged.
• Temperature: You should use envelopes that are compatible with the heat
and pressure of the machine.
• Size: You should only use envelopes within the following size ranges.
Minimum
3 x 5 in.
(76 x 127 mm)
NOTE:
• Load only one envelope at a time to print envelopes.
• You may experience some paper jams when using any media with a
length less than 5.5 in. (140 mm). This may be caused by paper that has
been affected by environmental conditions. For optimum performance,
make sure you are storing and handling the paper correctly. Please refer
to Paper Storage Environment on page 11-10..
11 Specifications
Maximum
8.5 x 14 in.
(216 x 356 mm)
11-11