Casio CLASSWIZ CG Software User's Manual page 80

Grab a point on a window and drag it
around the display
Adjust the background image
Specifying the Display Range of the Graph Window (View Window)
Use the View Window menu
also use this menu to specify the range of values for drawing polar and parametric type graphs.
* This menu appears on the Graph tab when you select T > [View Window]. It can also be displayed from
other tabs in the Graph&Table app, Dyna Graph app and the Recursion app. The menu contents are the
same regardless of where it is displayed.
Using the Preset View Window Settings
To use this setting:
Initial calculator setup
Presets according to the current angle unit setting (S > [Angle]) [Trigonometric]
Calculator standard setup
Fix the current y -axis setting and change the x -axis setting so the
on-screen y -axis and x -axis scale widths are one-to-one
Fix the current x -axis setting and change the y -axis setting so the
on-screen y -axis and x -axis scale widths are one-to-one
To specify the display range manually
Use the View Window to input values for the items below.
• x Minimum, x Maximum, x Scale ( x -axis minimum value, maximum value, scale)
*
• y Minimum , y Maximum, y Scale ( y -axis minimum value, maximum value, scale)
• x Dot Value is the value per dot in the x -axis direction. It is determined according to the values of x Minimum
and x Maximum. Changing the x Dot Value value automatically updates the x Maximum value.
* When the tab is hidden, the value set by y Minimum is the bottom edge of the graph window (red frame
below).
To specify the range of T and θ values and the pitch
These settings are applied when drawing parametric and polar graphs. Use the View Window to input values
for the items below.
• T,θ Minimum, T,θ Maximum (maximum and minimum values assigned to T in the parametric type function,
and maximum and minimum values to be assigned to θ in the polar coordinate type function)
• T,θ Pitch is the pitch of the T and θ values when drawing the graph. The smaller the pitch values, the finer
the graph that is drawn. Larger values result in coarser graphs.
T > [Pan]
T > [Fade I/O]
*
to specify the display range ( x - and y -axis range) of the graph window. You can
"Grabbing a Point on a Window and
Drag It Around the Display (Pan)"
(page 81)
"Adjusting the Graph Window
Background Image (Fade I/O)"
(page 81)
Select T > [View Window] > [Pre-set
Windows] and then select this:
[Initialize]
[Standard]
[Square] > [Y Base]
[Square] > [X Base]
80