Casio CLASSWIZ CG Software User's Manual page 159

Select all objects on the
screen
Deselect all objects on the
screen
Moving and Deleting an Object
To move an object
1. Select the object you want to move.
• If you want to move only one of the vertices of a triangle for
example, select the vertex. To move only one side of the
triangle, select the side.
• In each of the steps below, an example screenshot is shown
when one side of a triangle is selected and moved.
2. Press X.
• This causes the
of the screen and the pointer to change from
a rectangle encloses the object that you selected in step 1.
3. Use the cursor keys to move the object in the direction you want.
4. To move the object to the current location of the rectangle, press O.
Note
• If you press X when nothing is selected on the screen, the pointer changes to
use to pan (shift) the entire screen.
• Sometimes you may find that an object does not move the way you want it to. If this happens, press /
to cancel the move and then do the following to try the move again.
- Lock the part(s) of the object that you do not want to move (see
of an Object" (page
- Temporarily unlock all objects by selecting
To delete an object
1. Select the object you want to delete.
Select T > [Edit] > [Select All].
Press a or select T > [Edit] > [Deselect All].
icon to appear in the upper right corner
171))
T > [Option] > [Clear Constraint] (page 172)
to . Also,
"Locking or Unlocking a Measurement
159
, which you can