Casio CLASSWIZ CG Software User's Manual page 156

• This causes a selection boundary to appear, indicating the
size of the triangle to be drawn.
4. Press O.
• This draws a triangle.
Note
• The same type of two-point selection boundary in the above procedure is also used when drawing an
isosceles triangle, rectangle, square, or regular n-gon.
In each case, the resulting object is the maximum size that fits in the screen if the second point specified
is too close to or at the same location as the first point.
Example 2: To draw a polygon
1. Select T > [Draw Special] > [Polygon].
2. Move the pointer to the location where you want a vertex of the polygon to be and then press O.
• Repeat this step as many times as required to specify the
other vertices of the polygon.
3. To complete the polygon, move the pointer to the location of the first
vertex and then press O.
4. Press b to deselect the Polygon tool.
• If you press b without performing the operation in step 3 above, the figure is finalized as-is, resulting in
an unclosed non-polygon.
Inserting Text into Screen Images
To insert text into a screen image
1. Move the pointer to the location where you want to insert the text.
2. Select T > [Option] > [Text].
156