Casio CLASSWIZ CG Software User's Manual page 61

• Performing the next step inputs the number sequence automatically starting from the specified cell. If any
cell that is within the range of cells where the number sequence values will be input already contains data,
the existing data is replaced with the number sequence values.
4. After everything is the way you want, select
O.
• This performs all the required calculations according to your
settings and inserts the results into the spreadsheet.
Copying or Cutting Cell Contents and Pasting Them in Another Location
Use the procedures below to copy or cut the contents of one cell or multiple cells, and then paste them into
another cell or cells.
For information about what happens when you copy or cut cell contents that include cell references and paste
them into another location, see
To copy the contents of a single cell and paste them into another cell
1. Select the cell whose contents you want to copy.
2. Select T > [Copy & Paste].
• This causes "[OK]: Paste" to appear in the status bar. You can continue to paste while this message is
displayed.
3. Move the cursor to the cell where you want to paste the contents.
4. Press O.
• The contents of the cell you copied are pasted and the cursor moves down
5. If you want to paste the same contents to another cell, repeat steps 3 and 4.
• If you want to continue pasting to the cell to which the cursor has been moved, just repeat the operation
in step 4.
6. To end the paste operation, press b.
* Default setting. The direction of cell movement is in accordance with the
setting.
To copy the contents of a range of cells and paste them into another location in the spreadsheet
1. Select the range of cells whose contents you want to copy.
2. Select T > [Copy & Paste].
• This causes "[OK]: Paste" to appear in the status bar. You can continue to paste while this message is
displayed.
3. Move the cursor to the cell that is the upper left corner of the range of paste destination cells.
4. Press O.
• This pastes the contents of the range of cells you copied.
5. If you want to paste the same contents to another location, repeat steps 3 and 4.
6. To end the paste operation, press b.
To cut the contents of a single cell and paste them into another cell
1. Select the cell whose contents you want to cut.
2. Select T > [Cut & Paste].
• This causes "[OK]: Paste" to appear in the status bar.
3. Move the cursor to the cell where you want to paste, and then press O.
"Relative Cell Reference" (page 62)
61
and then press
and "Absolute Cell Reference" (page
S > [Cursor Moves] (page 74)
*
to the next cell.
62).