Casio CLASSWIZ CG Software User's Manual page 217

Off Hides the coordinates of the current trace pointer position.
Angle Unit (Geometry)
Specifies whether to include units when displaying angles for a figure on the Geometry app drawing screen.
◆
Displays angles with units.
On
Off Displays angles without units.
Length Unit (Geometry)
Specifies whether to include units when displaying lengths for a figure on the Geometry app drawing screen.
mm, cm, m, km, in, Displays lengths with units.
ft, yd, mile
◆
Displays lengths without units.
Off
Grid (Graph)
Use this setting to show or hide grid points or grid lines within the graphing area.
On Shows grid points.
Hides grid points and lines.
*
Off
◆
Shows grid lines.
Line
* The initial default setting for the Geometry app is "Off".
Grid Space (Geometry)
Specifies the pitch (spacing) of the grid points and lines on the Geometry app drawing screen. You can specify
◆
a value from 0.01 to 1
Axes (Graph)
Use this setting to show or hide coordinate axes ( x -axis and y -axis) in the graphing area.
On Shows coordinate axes.
Hides coordinate axes.
*
Off
◆
Shows coordinate axes along with a scale on each axis.
Scale
* The initial default setting for the Geometry app is "Off".
Label (Graph)
◆
Shows x -axis, y -axis, and origin (0) labels.
On
Off Hides labels.
Show Equation (Graph)
This is a display setting that controls what happens when the trace pointer is displayed on a graph while using
the graph analysis and trace functions.
◆
Shows the equation of the graph where the trace pointer is currently located.
On
Off Hides the equation of the graph where the traces pointer is currently located.
Graph Simultaneously (Graph)
Specifies the graphing method when drawing multiple graphs.
On All graphs drawn at the same time.
◆
Graphs drawn individually.
Off
to 1000, in increments of 0.01.
217