Casio CLASSWIZ CG Software User's Manual page 211

5. After you finish all the operations you want to perform, terminate the connection between the calculator and
a computer.
• See "Terminating the Connection between the Calculator and a Computer" (page
Note
• The "Select Connection Mode" dialog will not appear if you connect the USB cable to the calculator
while the icon is in the status bar or while a graph, Geometry app figure, or other figure is flashing
on the display. Wait until the
of the graph, and then try connecting the USB cable again.
• If the message "Storage Memory Full" appears when you are trying to connect the calculator to a
computer, it means that there is not enough calculator storage memory available. If this happens,
delete any calculator storage memory files that you no longer need to free up memory and then try
connecting again.
• When copying a file from your computer's local disk to the calculator drive, it may take several minutes
before copying starts. This is because copying automatically performs optimization of the calculator's
storage memory. It does not indicate malfunction.
• A USB connection between the calculator and a computer may be terminated automatically if the
computer enters a power save mode, sleep mode, or any other standby state.
OS Update
Select [OS Update] on the Select Connection Mode dialog
operating system. For details, see the text of releases that are issued when a new operating system version is
released.
* See step 1 of the procedure under
(page 210).
Calculator Drive Contents
Your calculator has a main memory and a storage memory for storing data. You can use the
(page 194) to display the contents of each memory area.
You can also use the calculator drive to display calculator's Storage Memory contents on a computer screen.
The root directory of the calculator drive displays the files and folders described below.
• @MainMem folder ... This folder contains the data of calculator main memory. See
contents" (page 211). The contents of this folder are copied from main memory to storage memory each time
the calculator is connected to a computer via USB.
• Capt folder ... This folder is automatically created, when you
captured image. Captured images saved in bmp format can be displayed on a computer screen.
• module.py ... This file is automatically created when you start up the
• Other ... Other files that contain calculator data (.g4m file name extension), py files, csv files, etc. are also
displayed. For details, see
* If there is not enough storage memory space available to perform this copy operation, the message "Storage
Memory Full" appears when you connect via USB, and the copy operation will not be performed. If this
happens, delete any calculator storage memory files that you no longer need to free up memory and then
try connecting again.
@MainMem folder contents
All of the files below correspond to data in the calculator's main memory. For details about data contents, see
"Data Displayed on the Main Memory Tab" (page
icon disappears or perform the required operation to stop the flashing
"Establishing a Connection between the Calculator and a Computer"
"Files Displayed on the Storage Memory Tab" (page
194).
*
when using a computer to update the calculator's
*
capture a screen image (page
Python app (page
211
213).
Memory app
"@MainMem folder
13), to save the
119).
196).