Casio CLASSWIZ CG Software User's Manual page 253

Too Many Columns You are trying to add more than 26 columns
to an animation table.
First configure • You are trying to run an animation without
animation settings.
• You are trying to execute T > [Animate]
Cannot Add • The point you selected for an
Animation
• The point you selected for an
Select the
You are trying to execute T > [Animate]
applicable
> [Add Table] without first selecting the
measurement icon.
appropriate measurement icon.
First configure You tried to execute T > [Animate]
animation settings
> [Display Table] without generating an
and create a table.
animation table.
Create at least one You are attempting to execute a surface
figure with a fill color.
area calculation (T > [Option] > [Area
Calc]) when there is no figure on the screen
with a fill color.
Settings errors
When you see this It means this:
message:
Out of Domain Attempting to input a value that is outside
the allowable input range.
Invalid Setting Input of an improper View Window value.
Input of an improper value on the range
screen and use of that value for execution.
Attempting to create a table with a Step
value of 0.
Attempting to input illegal View Window
setting combinations.
Example: x Minimum = 10, x Maximum =
10
Attempting to create a table in the
Recursion app when the Start value is
greater than or equal to the End value.
Internal calculation generated a
mathematical error (division by zero, etc.)
when executing a function calculation or
a calculation in the Statistics or Financial
app.
Improper values were input in the 3D
Graph app for a template coefficient.
first configuring its settings.
> [Add Table] without first configuring
animation settings.
Add Animation or Replace Animation
command operation cannot be used in
an animation because it is locked, etc.
Add Animation or Replace Animation
command operation cannot be used in
an animation because it is already being
used in the animation you are configuring
or in another animation.
Delete columns from the animation table
that you do not need and try again.
Configure animation settings and try again.
Select a point to which animation can be
added and try again.
Select the icon of a measurement that can
be added to an animation table.
Generate an animation table first.
Draw a figure with a fill color and try again.
So you need to do this:
Input a value that is within the allowable
range.
Change the View Window value so it is
within range.
Input a proper range value.
Specify a Step value other than 0.
Enter values that have the proper
relationship with each other.
Change the value so the Start value is less
than the End value.
Since the calculation contains one or more
values that cannot be calculated, input
different values and try again.
Input coefficient values that can define the
3D graph.
253