Casio CLASSWIZ CG Software User's Manual page 100

Note
• Note that the following input in step 4 results in an error.
For this template:
[Line] > [
[Line] > [
[Line] > [Line through 2 points]
Through point (X
[Line] >[
Direction vector [a,b,c]
[Plane] > [
[Plane] > [
[Plane] > [Plane through 3 points]
[Sphere] > [
[Sphere] > [
[Cylinder]
[Cone]
To edit a template
1. Highlight the line where the template you want to edit is located, and then press O.
• This displays the template's numeric input window.
2. Make changes to the existing values as required.
3. After everything is the way you want, press O.
(If you are editing a [Cylinder] or [Cone] template, highlight
To delete a template
To delete a stored template, use the same operation as that for deleting a Graph&Table app's stored function.
See "To delete a function" (page 78)
Storing and Editing Functions for 3D Graphing
To store a function
1. On the Function tab, highlight the line where you want to store a function.
2. Select T > [Enter Equation].
3. Perform the operations shown in the table below.
To select this function type:
Cartesian coordinate type (Z= f (X, Y) form)
Xst ＝ f S, T
Parametric type
Yst ＝ f S, T
Zst ＝ f S, T
Solid of rotation on the X-axis (Y= f (X) form)
Solid of rotation on the Y-axis (Y= f (X) form)
]
]
,Y ,Z )
0 0 0
]
]
]
]
]
for details.
form
*1
*2
This type of input results in an error:
a=0 or b=0 or c=0
X, Y, Z elements = 0 for v
Both points = Identical coordinate values
All direction vector elements = 0
a=0 and b=0 and c=0
• X, Y, Z elements of either or both u and v = 0
• u and v = Identical orientation
• Two of three points = Identical coordinate
values
• Three points are on a straight line
r = 0 or less
Input values do not satisfy a
Radius: 0 or less
Same value for Zmin and Zmax
and then press O here.)
Select this menu item:
[Z=]
[Parametric]
[ x -Axis Rotate]
[ y -Axis Rotate]
100
2 2 2
+b +c >4d.