Casio CLASSWIZ CG Software User's Manual page 212

Folder name
@3DGRAPH
@GEOM
@DBASE
@PROBSIM
LISTFILE
MAT_VCT
SSHEET
ROOT
* File name extensions are not displayed on the Main Memory tab of the calculator's Memory app. For files
that names enclosed in parentheses, the Main Memory tab shows the name in parentheses.
Main Memory Data Updating upon Termination of a USB Connection
While there is a USB connection between the calculator and a computer, you can use the computer to edit
the @MainMem folder contents by deleting folders and files, adding files, etc. When you terminate the USB
connection, the calculator's main memory data is updated with the current contents of the @MainMem folder.
Note the following important points.
• Deleting the @MainMem folder will cause all data in the calculator's main memory to be initialized.
• Updating the @MainMem folder affects up to three levels of folders inside the storage memory root folder.
SMEM ← Storage memory root folder
Any folders and files past Level 3 are moved to a folder named "SAVE-F" in storage memory.
• Adding a g4m file to the @MainMem folder while there is a USB connection between the calculator and a
computer will copy the data item(s) included in the g4m file to the calculator's main memory. For details about
the main memory data item names that correspond to the g4m file names in the @MainMem folder, see
"@MainMem folder contents" (page
items included in the g4m file, a corresponding folder will be created automatically and the data items will be
copied to that folder.
*
File name
3DGRAPH.g4m
@IMAGE.g4m
<Data name>.g4m
Adopted.g4m, Atomic.g4m, Electoro.g4m, Periodic.g4m, Physico.g4m,
Univers.g4m, User.g4m
PROBSIM.g4m
FILEx.g4m (LISTFILE x), LISTxx.g4m, LISTANS.g4m (LIST ANS)
MATx.g4m, MATANS.g4m (MAT ANS), VCTx.g4m, VCTANS.g4m (VCT ANS)
_SETTINGS.g4m, SHEET.g4m, <Data name>.g4m
ALPHAMEM.g4m (ALPHA MEM)
CONICS.g4m
DIST.g4m
DYNAMEM.g4m (DYNA MEM)
EQUATION.g4m
FINANCE.g4m
NUMINEQ.g4m (fx-CG100 only)
RECUR.g4m (RECURSION)
SETUP.g4m
STAT.g4m
SYSTEM.g4m
TABLE.g4m
Y=DATA.g4m
@MainMem (Level 1)
Folder (Level 2)
Folder (Level 3) ← Updating affects files up to this.
211). If there is no folder in main memory that corresponds to the data
212