Casio CLASSWIZ CG Software User's Manual page 44

7. Specify the graph color as required.
(1) Highlight [Color] and then press O.
(2) On the menu that appears, highlight the color you want and then press O.
8. Press >. Or highlight
• This displays, on the Results tab, test calculation results and input values (or summary statistics calculated
from the specified data).
• For a description of the calculation results displayed and the operations available on the Results tab, see
"Using the Test Results Tab" (page
9. To display the graph, press >.
• For operations that can be performed on the Graph tab, see
*2 This operation is not required in the following cases.
- When the test type is Linear Regression t Test
- When the test type is ANOVA, with [How Many] > [1] specified
Test Types and List Variables
Depending on the type of test you want to perform, input data in List Editor and create list variables as described
below.
Linear Regression t Test
Required list variable(s):
Three list variables for use as XList ( x data), YList ( y data), and Freq
*
(frequency data)
* If you are not using frequency data, you do not need the Freq list variable.
2
χ Goodness-of-Fit Test
Required list variable(s):
Two list variables used for Observed (observed counts)
(expected frequencies)
* All list elements must be positive integers.
ANOVA
You can perform either One-Way ANOVA or Two-Way ANOVA. On the Setup tab, select [How Many] > [1] for
One-Way ANOVA or [2] for Two-Way ANOVA.
ANOVA Types:
One-Way ANOVA
Two-Way ANOVA
The list variables used in ANOVA are created as described below.
• One-Way ANOVA: For example, if there are two conditions (Condition 1, Condition 2) for Factor A, each list
is created as shown below.
Factor A
1
1
2
2
• Two-Way ANOVA: For example, if there are two different conditions (Condition 1, Condition 2) for Factor A
and Factor B, each list is created as shown below.
*2
and then press O.
46).
*2
Required list variable(s):
Two list variables used for Factor A (Factor
A condition) and Dependnt (sample data)
Three list variables used for Factor A
(Factor A condition), Factor B (Factor B
condition) and Dependnt (sample data)
Dependent
113
Condition 1 sample data
116
133
Condition 2 sample data
131
"Using the Test Graph Tab" (page
*
and Expected
44
48).
Setup tab display:
Setup tab display:
Setup tab display: