Casio CLASSWIZ CG Software User's Manual page 209

(2) Exiting the Exam Mode by Allowing 12 Hours to Elapse
Approximately 12 hours after entering the Exam Mode, turning on the calculator will cause it to exit the Exam
Mode automatically.
Important!
• If you press the RESTART button or if you replace batteries before turning on the calculator, it will
re-enter the Exam Mode when turned on, even if 12 hours have elapsed.
(3) Exiting the Exam Mode by Connecting to another Calculator
1. On the calculator that is in the Exam Mode (Calculator A), display the Exam Mode Manager menu.
2. Use a 2.5mm plug cable
(Calculator B).
3. On Calculator A, highlight [Unlocked Exam Mode] and then press O.
4. On Calculator B, select h > Exam Mode, highlight [Unlock Exam Mode] and then press O.
• When the "Complete!" message appears on Calculator B, Calculator A automatically restarts. Calculator
A exits the Exam Mode and the data on Calculator A returns to the state it was in before the Exam Mode
was entered.
*2 Included in the optionally-available SB-2000 package (USB cable and 2.5mm plug cable).
Note
• You can also connect your calculator to another calculator model that has an exam mode and unlock
your calculator's Exam Mode from the other model or unlock the other model's exam mode from your
calculator.
For details about the required operation on the other model, see the information below.
- Exam Mode Manager menu's [Exam Mode Help] > [How to Exit]
- User's documentation of the other calculator model
*2
to connect Calculator A to another calculator that is not in the Exam Mode
209