Casio CLASSWIZ CG Software User's Manual page 248

Wrong argument The size relationship between two
size relationship. arguments is opposite from what it should
be.
Example: 3C10
Non-Real ERROR Calculation that produces a complex
number when S > [Complex Mode]
> [Real] is specified, even though the
argument is a real number.
Can't Simplify Fraction simplification was attempted
using the
simplification could not be performed using
the specified divisor. Example: Specifying
a divisor of 3 to simplify the fraction 4/8.
Can't Solve! Adjust A Solve calculation could not obtain a
initial value or solution within the specified initial default
bounds. Then try estimated value.
again.
Time Out A Solve calculation was unable to satisfy
convergence conditions.
Conversion ERROR • Attempting to use the unit conversion
• Executing a conversion calculation using
Invalid Type An illegal data type is specified.
List, matrix, and vector calculation errors
When you see this It means this:
message:
Invalid list, matrix or Incorrect use of a list, matrix, or vector.
vector
Dimension ERROR Illegal dimension used during matrix,
vector, or list calculations.
Complex Number In List containing complex number used in a
calculation or operation for which complex
List
number data is invalid.
Complex Number In Matrix containing complex number used
Matrix in a calculation or operation for which
complex number data is invalid.
Complex Number In Matrix or vector containing complex
Matrix or Vector number used in a calculation or operation
for which complex number data is invalid.
Improper Number of You attempted to create a list, matrix, or
Elements vector whose number of elements exceeds
the maximum limit.
ISimp function (page
command to convert between two units
in different categories.
the same command twice in a conversion
expression.
Change the values so the size relationship
required by the syntax is maintained.
Change the [Complex Mode] setting to
something other than [Real].
Specify a different divisor or execute
223), but ISimp without specifying any divisor.
Change the specified initial default
estimated value or correct the input
expression.
If you are performing a Solve calculation,
try changing the initial default estimated
value closer to the expected solution.
In a conversion expression, specify two
different commands that are in the same
category.
Specify valid data.
So you need to do this:
Press b to display the location of an error
and make necessary corrections.
Check the matrix, vector, or list dimension.
Change all elements in the list to real
numbers.
Change all elements in the matrix to real
numbers.
Change all elements in the matrix or vector
to real numbers.
A list cannot have more than 999 elements,
and a matrix cannot exceed 999 rows ×
999 columns. For vector elements, specify
within 1 row × 999 columns or 999 rows ×
1 column.
248