Casio CLASSWIZ CG Software User's Manual page 48

Note
• Values displayed on the Results tab are stored in variables in C > [Variable Data] >
[Result] > [Test] (page 241)
variables a and b are in C > [Variable Data] >
What you can do while displaying calculation results
You can use the operation below to save all numeric values currently displayed on the Results tab
variable.
1. Select T > [Save Result in List].
2. Use the dialog box that appears to input the number of the list you want to use as a save destination
then press O.
*1 Includes the currently displayed calculation results and input values. However,
parameters (page 45)
*2 Input the number of an empty list. Overwrite saving is not available.
*3 With ANOVA, each of the five calculation result columns is saved to five list variables, starting from the list
number you input. You can specify a list number within the range from 1 to 22.
Note
• You can perform the operations described below while the calculation results of Linear Regression t
Test are displayed.
- Save the calculation result regression equation to a function variable.
- Find the residuals between the actual data and the values calculated by the regression model and
save them to list variables.
See "What you can do while viewing regression model information" (page
Using the Test Graph Tab
When you perform a test other than Two-Way ANOVA
You can perform the operations below after performing one of the following tests: 1-Sample Z Test, 2-Sample
Z Test, 1-Proportion Z Test, 2-Proportion Z Test, 1-Sample t Test, 2-Sample t Test, χ
2
χ Two-Way Test, 2-Sample F Test.
To do this:
Display the p -value
Z Test: Display the z -value and display a cross pointer at the
corresponding point on the graph
1-Sample/2-Sample t Test: Display the t -value(s) and display a
cross pointer at the corresponding point on the graph
2 2
χ Test: Display the χ -value(s) and display a cross pointer at the
corresponding point on the graph
2-Sample F Test: Display the F -value and display a cross pointer
at the corresponding point on the graph
*1 For a two-tailed test, the cross pointer moves between the two values each time l or r is pressed.
*2 A relevant point outside of the display range is not displayed.
Note
• Calculation results displayed by the above operations are stored in the alpha variables described
below.
Z Test z - and p -values are stored in variables Z and P respectively.
t Test t - and p -values are stored in variables T and P respectively.
and C > [Variable Data] >
are not saved.
[Statistics] > [Input] (page
[Statistics] > [Graph] (page
Select this menu item:
T > [Calculate P Value]
T > [Calculate Z Value]
T > [Calculate T Value]
T > [Calculate CHI Value]
T > [Calculate F Value]
48
[Statistics] >
241). However,
240).
*1
alternative hypothesis
35).
2
Goodness-of-Fit Test,
*1*2
*1*2
*1*2
*1*2
to a list
*2*3
and