Casio CLASSWIZ CG Software User's Manual page 204

• In an Exam Mode, the backlight brightness level will change to the darkest setting automatically if you
do not perform any operation on the calculator for about 30 seconds. Note that in an Exam Mode the
backlight will not turn off, so battery power runs down faster. Exit the Exam Mode as soon as possible
after you get through using it.
Entering an Exam Mode
1. h > Exam Mode
• This displays the Exam Mode Manager menu.
2. Highlight [Enter Exam Mode] and then press O.
3. From the menu that appears, select the Exam Mode you want to enter.
4. Press O.
• This displays the "Enter Exam Mode?" dialog on the calculator.
5. Press O.
• If, in step 3 of this procedure, you select any Exam Mode
besides IB, a warning dialog will appear at this time. To
continue with the operation and enter the Exam Mode you
selected in step 3, select [OK]. If you are about to take an IB
exam, select [Cancel] to return to step 3, and then select IB.
• After displaying the message Entering Exam Mode. for about
three seconds, the calculator enters the Exam Mode you
selected in step 3 above and displays the Exam Mode
Manager menu.
Exam Mode Calculator Operations
• Exam Mode screens are identified by a boundary around the screen and a flashing icon in the upper right
corner. The color of the boundary and the icon type depend on the Exam Mode.
Exam Mode
IB
Portugal
United Kingdom
Texas (USA)
The flashing interval of the icon slows down about 15 minutes after you enter an Exam Mode.
• In an Exam Mode, the Auto Power Off trigger setting is fixed at approximately 60 minutes.
• Selecting [Elapsed Time] on an Exam Mode Manager menu causes the dialog box shown below to appear.
The dialog box shows the elapsed time in an Exam Mode.
You can restart the elapsed time count by performing one of the operations below.
- Press the RESTART button.
- Remove the calculator's batteries.
- Delete Main Memory data.
- If you are already in an Exam Mode, re-enter it.
* If you are already in one Exam Mode you will not be able to enter the other Exam Mode. To change to
the other Exam Mode, exit the current Exam Mode and then enter the other one.
• The table below shows how certain operations affect the Exam Mode.
Boundary Color
Green
Blue
Magenta
Cyan
*
204
Icon