IBM Flex System p24L Installation And Service Manual page 61

Chapter 7, "Parts listing for IBM Flex System p24L Compute Node," on page 79
The parts listing identifies each replaceable part and its part number.
Related information:
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/
Removing a network adapter
If your network adapter needs to be replaced, you can remove it from its connector in a compute node.
About this task
Figure 20. Removing a network adapter from its connector
To remove a network adapter, complete the following steps:
Procedure
1. Read the Safety topic and the "Installation guidelines" on page 27.
2. Shut down the operating system on all partitions of the compute node, turn off the compute node,
and remove the compute node from the IBM Flex System Enterprise Chassis. See "Removing the
compute node from an IBM Flex System Enterprise Chassis" on page 29.
Chapter 6. Installing and removing components
49