IBM Flex System p24L Installation And Service Manual page 154

B70054DD • B7006906
B70054DD
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7005600
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7005601
Explanation: System firmware failure. There was a problem initializing, reading, or using system location codes.
Response: Go to Isolating firmware problems.
B7005602
Explanation: The system has out-of-date VPD LIDs.
Response: Check for server firmware updates; then, install the updates if available.
B7005603
Explanation: Enclosure feature code and/or serial number not valid.
Response: Verify that the machine type, model, and serial number are correct for this server.
B7006900
Explanation: PCI host bridge failure
Response:
1. Replace the system-board, as described in Replacing the system-board and chassis assembly.
2. If the problem persists, use the PCI expansion card (PIOCARD) problem isolation procedure to determine the
failing component.
B7006906
Explanation: System bus error
Response: Replace the system-board and chassis assembly, as described in Replacing the system-board and chassis
assembly.
142
Power Systems: IBM Flex System p24L Compute Node Installation and Service Guide