IBM Flex System p24L Installation And Service Manual page 144

B2D03001 • B7000103
B2D03001
Explanation: Informational system log entry only.
Response: No corrective action is required.
B2D03002
Explanation: Informational system log entry only.
Response: No corrective action is required.
B7xxyyyy licensed internal code SRCs:
A B7xxyyyy system reference code (SRC) is an error code or event code that is related to licensed internal
code.
The B7xxyyyy SRCs below are the system reference codes that might be displayed if system firmware
detects a problem. Follow the suggested actions in the order in which they are listed until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions. See
Chapter 7, "Parts listing for IBM Flex System p24L Compute Node," on page 79 to determine which
components are CRUs and which components are FRUs.
Note: For problems persisting after completing the suggested actions, see "Checkout procedure" on page
414 and "Solving undetermined problems" on page 457.
B7000102
Explanation: System firmware detected an error. A machine check occurred during startup.
Response:
1. Collect the event log information.
2. Go to Isolating firmware problems.
B7000103
Explanation: System firmware detected a failure
Response:
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to Isolating firmware problems.
132
Power Systems: IBM Flex System p24L Compute Node Installation and Service Guide