Table of Contents
Advertisement
OTHER ADJUSTMENT
[30] FNS Adjusting the Tension of the
Stapler- Movement Timing Belt
1. Tools used
• Screwdriver (Phillips)
• Tension gauge or spring balance
2. Preparation
(1) If the belt tensioner has become loose as a result
of belt replacement or for some other reason,
adjust as described below.
3. Adjustment Procedure
(1) Loosen the 2 screws holding the belt-tensioner in
place.
(2) Using a tension gauge or spring balance, pull the
belt-tensioner so that tension A is at the value
indicated below. Maintain this tension while re-
tightening the screws.
Spec value for tension: A = 1.5±0.5kg
Belt-tensioner
Screws
1 - 138
[31] FNS Adjusting the Tension of the
Stapler- Rotation Timing Belt
1. Tools used
• Screwdriver (Phillips)
• Tension gauge or spring balance
2. Preparation
(1) If the belt tensioner has been loosened as a result
of belt replacement or for some other reason,
adjust as described below.
3. Adjustment Procedure
(1) Loosen the 2 screws holding the belt-tensioner in
place.
(2) Using a tension gauge or spring balance, pull the
belt-tensioner so that tension A is at the value
indicated below. Maintain this tension while re-
tightening the screws.
Spec value for tension: A = 0.75 ±0.05kg
Belt-tensioner
k
Screws
Advertisement
Table of Contents
