Table of Contents
Advertisement
4.
LCT spring pressure adjustment
Spring
Strong Weak
a.
Adjustment method
Step
1
Remove the LCT from the main body.
2
Change the spring hooking position.
Weak: Double feed is prevented.
Strong: No feed is prevented.
Reference: The spring load changes
about 10% each time the
spring is hooked in the next
slit.
3
Install the LCT.
Operation
1 - 109
[6] Paper Feed Height (Upper Limit)
Adjustment
Caution 1: Paper feed height (upper limit)
adjustment must be performed when
no paper feed occurs, when the
leading edge of the fed paper is
folded or when a convexly curled
paper is fed. To perfor m this
adjustment, move the upper limit
sensor mounting bracket vertically.
Caution 2: This adjustment may affect the
release amount of the pick-up so
that [7] pick-up roller release amount
adjustment must be performed after
this adjustment.
1.
Tools
• Screwdriver (Phillips)
• Scale
2.
Adjustment of paper feed height (upper
limit) of tray 1/2/3
Paper
up/down
plate
Paper feed guide
Sensor mounting bracket
OTHER ADJUSTMENT
Screws
Advertisement
Table of Contents
