Test Pattern Density Setting; Finisher Adjustment - Minolta DI750 - MANUAL SERVICE Service Manual

[16] Test Pattern Density Setting

Setting the test pattern density.
Select Test pattern density setting in the 36 Mode
5
Menu Screen to display the Test Pattern Density Set-
ting Screen.
Step
1 Enter the 36 mode.
2 [36 Mode Menu Screen]
Press Test pattern density setting.
5
3 [Test Pattern Density Setting Screen]
Use the numeric keys to enter a number
and press the
Setting range: 0 to 255
4 Press the
COPY SCREEN
5 [Copy Screen]
Press the Start button to output a test
pattern.
6 To output another test pattern, press the
C button while pressing the Utility button
and repeat steps 3 to 5.
7 Press the
PREVIOUS SCREEN
Operation
SET key.
key.
key to end.

[17] Finisher adjustment

Adjusting the finisher, cover sheet tray, and trimmer.
1. Select Finisher adjustment on the 36 Mode
6
Menu Screen to display the Finisher adjustment
mode menu Screen.
2. Finisher adjustment items are as follows:
Stapling & Folding stopper adj.
1
Folding stopper adjustment
2
Cover sheet tray size adj.
3
Trimming stopper adjustment
4
3. Press the number key corresponding to the ad-
justed.
The adjustment screen for the selected adjust-
ment item appears.
4. When the adjustment is complete, the Finisher
adjustment mode menu Screen appears again.
5. Press the
PREVIOUS SCREEN
36 Mode Menu Screen.
1 - 79
36 ADJUSTMENT
key to return to the