Scanner And 2Nd/3Rd Mirror Carriage Movement - Minolta EPI 054 User Manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1174SBM0905A
9-5.

Scanner and 2nd/3rd Mirror Carriage Movement

The Scanner and 2nd/3rd Mirrors Carriage are moved by the Scanner Drive Cable fitted in
the rear side of the copier. The Cable is driven by the Scanner Motor.
Both the Scanner and 2nd/3rd Mirrors Carriage slide along the Scanner Shaft at the rear
side. At the front side, there is a Slide Bushing attached to the underside of each of the
bodies and that Bushing slides over the Slide Rail. The speed of the Scanner and 2nd/3rd
Mirrors Carriage varies with different zoom ratios.
The Scanner Reference Position Sensor detects the home position of the Scanner and
2nd/3rd Mirrors Carriage. If they are not at the home position when the copier is turned ON,
the Scanner Motor is energized to move them to the home position.
• 23 cpm Copier
Scanner
Scanner Shaft
• 15/18 cpm Copier
Slide Rail
Scanner Drive Cable
Scanner Motor M5
Scanner Motor M5
M-24
2nd/3rd Mirrors
Carriage
Scanner
Reference
Position
Sensor PC81
1149M009AA
1151M022YA