Table of Contents
Advertisement
[8] Copy Count by Parts to be Replaced
(Optional Parts)
This function allows you to make the following settings
for an optional part or data:
1. Copy count resetting
2. Limit value setting
3. Part number setting
4. Part name setting
The above settings can be made for 30 data numbers,
No.1 to No.30.
The copy count is incremented by 1 for each side irre-
spective of the paper size.
1.
Resetting the Copy Count by Parts to be
Replaced (Optional Parts)
This function allows you to reset the copy count
by parts to be replaced (optional parts).
Step
1
Enter the 25 mode.
2
[25 Mode Menu Screen]
Select "
Copy Count by Parts to be
5
Replaced."
3
[Parts Counter Menu Screen]
Select "
Optional Parts Count."
2
4
[Copy Count by Parts to be Replaced
(Optional Parts) Screen]
Data numbers (No.), part names (Name),
par t numbers (P/N), and count/limit
values are displayed in a list format.
Using
and
name.
To scroll the screen, use
keys.
5
Press the
COUNT RESET
the count value of the part displayed in
reverse video.
6
Press the
PREVIOUS SCREEN
return to the 25 Mode Menu screen.
Reference:
If the copy count exceeds the limit, the * mark
appears to the right of the limit value.
Operation
buttons, select a part
and
button to reset
button to
1 - 47
2.
Changing the data on the Copy Count by
Parts to be Replaced (Optional Parts)
This function allows you to change the limit value,
part number, or part name for the desired optional
copy count by parts to be replaced (optional parts).
Step
1
Enter the 25 mode.
2
[25 Mode Menu Screen]
Select "
Copy Count by Parts to be
5
Replaced."
3
[Parts Counter Menu Screen]
Select "
Optional Parts Count."
2
4
[Copy Count by Parts to be Replaced
(Optional Parts) Screen]
Data numbers (No.), part names (Name),
part numbers (P/N), and count/limit
values are displayed in a list format.
Using
and
number (No.).
To scroll the screen, use
5
Press the
Part Name Set
button.
Limit Set
6
[Data Change Screen by Parts to be
Replaced]
Press the
Part Name Set
button corresponding to the data
Limit Set
you want to change.
7
Enter new data using alphabetic and
numeric keys.
8
Perform steps 6 and 7 repeatedly to
change other data.
9
Press the
OK
to take effect.
To cancel the new data, press the
button.
CANCEL
Pressing either button will display the
Copy Count by Parts to be Replaced
(Optional Parts) screen again.
10
Press the
PREVIOUS SCREEN
return to the 25 Mode Menu screen.
25 ADJUSTMENT
Operation
buttons, select a data
and
keys
,
, or
P/N Set
,
, or
P/N Set
key to allow the new data
button to
Advertisement
Table of Contents
