Page 1 Advanced Information Di2510f/Di3510f www.minoltaeurope.com The essentials of imaging...
Page 3: Table Of Contents
Gebührenimpuls (for German and Swiss Users)......2-8 CE Marking (Declaration of Conformity) .........2-8 Laser Safety.................. 2-9 Internal Laser Radiation ..............2-9 CDRH Regulation................2-10 For European Users ..............2-11 For Denmark Users ...............2-11 For Finland, Sweden Users............2-11 For Norway Users .................2-12 Laser Safety Label ................2-13 Di2510f/Di3510f...
Page 4 (“Confirming Screen” function)............4-6 To change the display time for the “The job is accepted.” screen (“Notification Screen” function) ............4-7 To change the volume of touch panel beeps and alarms (“Sound Setting” function).............. 4-7 Enlarging the Touch Panel Screens..........4-8 Di2510f/Di3510f...
Page 5 Making Copies Using Accounts ..........5-6 Using the “Copy Track Mode” Parameter ........5-6 To make copies when accounts are specified .......5-6 “Cover Mode” Function ............... 5-8 Adding Cover Pages ...............5-8 To make settings for the “Cover Mode” function ......5-10 Di2510f/Di3510f...
Page 6 Before Using Fax Operations ............6-1 The Basic Screen ................6-1 The Auto-mode Screen ..............6-1 Sending a fax.................. 6-1 Copying ..................6-2 Displaying the fax screen ............... 6-2 Fax Screen ..................6-2 Displaying the copy screen ............6-6 Di2510f/Di3510f...
Page 7 Designating the Scan Range for the Original........6-36 Transmission with Name and Number on the Original (TSI) ..6-38 Inserting the Destination ...............6-40 Outputting the Activity Report ............6-41 Transmitting 2in1 ................6-42 Transmitting a Double-sided Original ...........6-43 Transmitting A4 Paper Set to Landscape ........6-45 Transmitting with Prioritization .............6-47 Di2510f/Di3510f...
Page 8 Changing Default Settings............7-6 To set the “Memory Recall” function ..........7-6 To set the “Mixed Original Detection” function......7-7 To set the “Language Selected for LCD” function ......7-8 To set the “Original > Copy Default” function ........ 7-9 Di2510f/Di3510f...
Page 9 To clean the touch panel (“Panel Cleaning” function) ....7-41 To dehumidify the duplexing document feeder (“Dehumidify” function) ..............7-42 To replenish the toner (“Toner Replenisher” function)....7-42 Copy Paper Paper Specifications..............8-1 Paper Types..................8-1 Paper Sizes ..................8-2 Paper Capacity ................8-3 Unsuitable Paper................8-4 Di2510f/Di3510f...
Page 10 To load a document of mixed sizes (“Mixed Orig Detection” function)........... 9-7 Positioning Documents on the Original Glass ......9-9 To position sheet documents............9-10 To position transparent or translucent documents ...... 9-11 To position books or magazines ..........9-12 Di2510f/Di3510f...
Page 11 Copying a Book ................10-27 Copying Book Pages onto Separate Double-Sided Pages ..10-29 Quickly Selecting Default Settings..........10-31 10.4 Specifying a Copy Density ............10-32 Selecting a Density Setting............10-32 Selecting the “Text” Setting............10-32 Selecting the “Photo” Setting .............10-33 Selecting the “Text/Photo” Setting ..........10-34 Di2510f/Di3510f...
Page 12 How to Output One-Touch Lists ..........11-35 11.11 Confirming the Contents Registered to FAX Programs ..11-36 How to Output FAX Program Lists ..........11-36 11.12 Confirming Text Registered to Bulletin Boards..... 11-38 How to Output the Bulletin Board List ........11-38 Di2510f/Di3510f...
Page 13 Setting the Language for the TSI Name and Reports... 12-19 How to Set the Communication Language.........12-19 12.7 Registering Telephone Numbers..........12-20 How to Set up the FAX Telephone Number Information ....12-21 12.8 Registering TSI Names ............12-24 How to Register and Change TSI Names ........12-24 Di2510f/Di3510f...
Page 14 Broadcasting (Mode 014) ..........12-67 Specifying Settings Concerning Whether or Not There Is a Connected Telephone or a Received Date Report and Their Formats (Mode 016) ........12-68 Specifications for the Failure Report Image (Mode 023) ... 12-69 Di2510f/Di3510f...
Page 15 When Incorrect Copies Are Printed ......... 14-3 14.3 When the Machine Is Not Operating Correctly ....... 14-8 14.4 The Fax Does not Work Properly..........14-10 Transmission is Poor..............14-10 Reception is Poor ...............14-12 Telephone Calls are Difficult to Make .........14-13 Di2510f/Di3510f...
Page 16 Replacing the Completion Stamp ........... 14-14 Replacing the Spare TX Marker STAMP 2 ......... 14-14 15 Appendix 15.1 Specifications ................15-1 Di2510f/Di3510f................15-1 Duplexing Document Feeder AFR-19 .......... 15-3 Duplex Unit AD-16................ 15-3 Switchback Unit SB-1 ..............15-4 Paper Feed Cabinet PF-124............15-4 2way Paper Feed Cabinet PF-210 ..........
Page 17 Di2510f/Di3510f...
Page 18 Di2510f/Di3510f...
Page 19: Introduction
Introduction Introduction We Want You to Be a Satisfied Customer Thank you for choosing a Minolta System. To ensure the best performance and effective use of your machine, this manual will provide information on the following topics: Getting to Know Your Copier Initial Steps .
Page 20: Explanation Of Manual Conventions
Text formatted in this style provides additional assistance. § Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. Di2510f/Di3510f...
Page 21: Explanation Of Basic Concepts And Symbols
“Width” and “Length” Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as “Y” in the illustration) and the second to the length (shown as “X”). Di2510f/Di3510f...
Page 22: Lengthwise
(X), the paper has a horizontal or landscape orientation, indicated by either “C” or Portrait and Landscape Portrait With the “portrait” orientation, the paper is vertical, like a portrait. Landscape With the “landscape” orientation, the paper is horizontal, like a landscape. Di2510f/Di3510f...
Page 23: Display Icons
Introduction Display Icons Plain paper Thick paper Overhead projector transparencies Envelope Paper Supply Icons The paper is empty. Di2510f/Di3510f...
Page 24: Energy Star
“low-power mode” after a period of inactivity. ® An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Di2510f/Di3510f...
Page 25: Components And Their Functions
Referred to as the “paper feed cabinet” throughout the manual. Job Separator JS-203 Allows printed pages to be separated (optional) Pull the lever when taking out the paper. *In order to use the job separator, the switchback unit must be installed. Di2510f/Di3510f...
Page 26 Referred to as the “finisher” throughout the manual. Additional Bin Kit If this option is attached to the finisher, the bins AK-1 (optional) for separating printed pages increases. Referred to as the “3rd paper output tray” throughout the manual. Di2510f/Di3510f...
Page 27 Internet Fax & An internal Internet Fax & Network Scan Kit. You Network Scan Kit can use this machine as a network scanner or as SU-3 (optional)* an Internet fax machine. For more details, refer to the Scanner Mode User Manual. Di2510f/Di3510f...
Page 28 Card NC-4 (optional)* scanner, or as an Internet fax machine. For more details, refer to the Scanner Mode User Manual or the Printer Controller Manual. * The internal options are not shown. How to use the job separator (JS-203)? 1-10 Di2510f/Di3510f...
Page 29: Part Names And Their Functions
Paper supply As the amount of paper in the paper drawer indicator decreases, the area that appears in red increases. Front door Opened when replacing the toner bottle, see page 13-2 . . . continued on next page Di2510f/Di3510f 1-11...
Page 30 Prevents printed pages from falling out of the paper output tray Used when the optional sorter is installed Touch panel Liquid crystal display in the control panel Used to specify various copy and fax settings and program or change functions 1-12 Di2510f/Di3510f...
Page 31 Opened when clearing a paper misfeed within the duplex unit 1st paper drawer Holds up to 500 sheets of paper The paper size can be adjusted freely, see page 8-8 . . . continued on next page * The internal unit is not shown. Di2510f/Di3510f 1-13...
Page 32 Control panel • Used to start scanning and printing operations. • Used when starting fax transmission or when starting fax reception following a telephone conversation. Document scales Used to align the document * The internal unit is not shown. 1-14 Di2510f/Di3510f...
Page 33 Power cord socket Used for connecting the machine’s power cord External telephone Used for connecting a line to a telephone. jack (TEL PORT) Telephone line jack Used for connecting to a standard telephone for line 1 line. (LINE PORT1) Di2510f/Di3510f 1-15...
Page 34: Options
Each drawer can hold up to 500 sheets of paper. The paper size can be adjusted freely. 4th paper drawer * PF-210: Equipped with a paper drawer that can supply 500 sheets of paper, for upper paper feed unit only. 1-16 Di2510f/Di3510f...
Page 35 Misfeed-clearing door Opened when clearing paper misfeeds Precautions for using the finisher, saddle kit and mail bin kit Do not place objects on top of the saddle kit or mail bin kit. Do not place objects under the paper output trays of the finisher. Di2510f/Di3510f 1-17...
Page 36 Additional Bin Kit (AK-1) Part Name Description 3rd paper output tray Collects printed pages Saddle Kit (SK-1) Part Name Description Paper output tray Collects printed pages Misfeed-clearing door Opened when clearing paper misfeeds that occurred in the finisher 1-18 Di2510f/Di3510f...
Page 37: Fax Option Names And Functions
Some types of external telephones cannot be used. For details, contact your service representative. Storage (Transmission) Stamp Unit (TX Marker STAMP UNIT 2) A stamp on originals that have been scanned makes confirmation possible. This can only be attached to the duplexing document feeder. Di2510f/Di3510f 1-19...
Page 38 Introduction 1-20 Di2510f/Di3510f...
Page 39: Safety Information
This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. WARNING Di2510f/Di3510f...
Page 40 Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. Di2510f/Di3510f...
Page 41 Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Connect the power cord to an electrical outlet that is equipped with a grounding terminal. Di2510f/Di3510f...
Page 42: Caution
Do not place any objects around the power plug as the power plug may be difficult to pull out when an emergency occurs. The socket-outlet shall be installed near the machine and shall be easily accessible as the power plug may be difficult to pull out when an emergency occurs. Di2510f/Di3510f...
Page 43 Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Di2510f/Di3510f...
Page 44: Precautions For Routine Use
Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result. Use the supplies and consumables recommended by the dealer. Use of any supply or consumable not recommended could result in poor image quality and breakdown. Di2510f/Di3510f...
Page 45: Miscellaneous
A full-length Declaration of Conformity is available at Minolta under Fax.: +49-511-7404-346, Tel.: +49-511-7404-272 in informing us on the serial number of your product.
Page 46: Gebührenimpuls (For German And Swiss Users)
This declaration is valid for the area of the European Union. This device must be used with shielded interface cables. The use of non- shielded cable is likely to result in interference with radio communications and is prohibited under EU directives. Di2510f/Di3510f...
Page 47: Laser Safety
Maximum Average Radiation Power: 28.9 µW at the laser aperture of the print head unit. Wavelength: 770-795 nm This product employs a Class 3b laser diode that emits an invisible laser beam. The laser diode and the scanning polygon mirror are incorporated in the print head unit. Di2510f/Di3510f...
Page 48: Cdrh Regulation
Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. This is a semiconductor laser. The maximum power of the laser diode is 5 mW and the wavelength is 770-795 nm. 2-10 Di2510f/Di3510f...
Page 49: For European Users
överskrider gränsen för laserklass 1. Det här är en halvledarlaser. Den maximala effekten för laserdioden är 5mW och vĺglängden är 770-795 nm. VARO! Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen. Di2510f/Di3510f 2-11...
Page 50: For Norway Users
Dersom apparatet brukes pĺ annen mĺte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstrĺling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og břlgelengde er 770-795 nm. 2-12 Di2510f/Di3510f...
Page 51: Laser Safety Label
Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pičce ou se trouve l’appareil. Di2510f/Di3510f 2-13...
Page 52: Acoustic Noise
EN 27779 is equal to or less than 70dB(A). Notice for Ni-MH Batteries Ni-MH (Nickel Metal Hydride) Batteries are installed inside machine as back up memory batteries. Please dispose according to local, state and federal regulations. 2-14 Di2510f/Di3510f...
Page 53: Installation Precautions
A location that is not near any kind of heating devices Power Source The power source requirements are as follows. Voltage fluctuation: Maximum ±10% (220 V-240 V: ±10%) Frequency fluctuation: Maximum ±0,3 Hz Use a power source with as little voltage or frequency fluctuations as possible. Di2510f/Di3510f 2-15...
Page 54: Space Requirements
To ensure easy copier operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below. Note Be sure to allow a clearance of 100 mm (4 in.) or more at the back of this machine for the ventilation duct. 2-16 Di2510f/Di3510f...
Page 55: Operation Precautions
CAUTION If the ventilation duct at the top of the machine becomes blocked, the inside of the machine will accumulate heat, resulting in a malfunction or fire. § Do not place any objects over the ventilation duct. Di2510f/Di3510f 2-17...
Page 56: Transporting The Machine
§ If you get burnt, immediately cool the skin under cold water, and then seek professional medical advice. Transporting the machine If you need to transport the machine over a long distance, consult your technical representative. 2-18 Di2510f/Di3510f...
Page 57: Care Of Machine Supplies
Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Di2510f/Di3510f 2-19...
Page 58: Legal Restrictions On Copying
Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. 2-20 Di2510f/Di3510f...
Page 59: Available Features
Position the document on the original glass with the center aligned with the book mark on the document scale. Start copying from the lower numbered pages. Press the [COPY] key, and then touch [ORIG. > COPY] followed by [BOOK] on the touch panel. Di2510f/Di3510f...
Page 60 Available Features For book-binding, touch [STANDARD BOOK] or [RIGHTBOUND], and then touch [SEPARATION]. Next, touch [ENTER]. Touch [DOUBLE-SIDED], and then touch [PAGE ORDER]. Touch [BOOK ORDER], and then touch [ENTER]. Press the [START] key. Di2510f/Di3510f...
Page 61 [START] key. Repeat step 7, and when the last page has been scanned, touch [FINISH]. Next, press the [START] key. Di2510f/Di3510f...
Page 62: Copying To Form A Booklet
Load the document into the duplexing document feeder. The document can also be positioned on the original glass. Press the [COPY] key, and then touch [ORIG. > COPY] followed by [4IN1/BOOKLET] on the touch panel. Di2510f/Di3510f...
Page 63 Press the [START] key. After all copies are printed, fold the pages in half to form a booklet. If the optional saddle kit is installed, creasing or folding can be set. For details, refer to “Creasing and Folding” on page 10-9. Di2510f/Di3510f...
Page 64: Automatically Stapling Pages While Copying
In order to perform the following procedure, the optional duplexing document feeder, finisher must be installed. Load the document into the duplexing document feeder. The document can also be positioned on the original glass. Press the [COPY] key, and then touch [FINISHING] on the touch panel. Di2510f/Di3510f...
Page 65 Available Features Touch [SORT]. Touch [2-POINT STAPLE]. Press the [START] key. Di2510f/Di3510f...
Page 66: Printing Multiple Copies Of Tickets
If the document is placed directly on the original glass and the size is detected automatically, the document will be scanned with a standard size. If the document has a non-standard size, first measure the size of the document. Position the document to be copied. Di2510f/Di3510f...
Page 67 Touch the button for the multiple bypass tray, and then touch [MODE CHANGE]. Touch [CARD], and then touch [ENTER]. If paper with a non-standard size is loaded, touch [CUSTOM SIZE], and then specify the paper size. (For details, refer to page 8-14.) Di2510f/Di3510f...
Page 68 Available Features Touch [ZOOM]. Touch [× 0.5]. Touch [AUXILIARY], and then touch [IMAGE REPEAT]. Touch [SIZE INPUT]. 3-10 Di2510f/Di3510f...
Page 69 Y for the document. For this example, set the length of side Y to “74”. Press the [START] key. Sixteen 105 mm × 37 mm tickets are copied onto one sheet of paper. Di2510f/Di3510f 3-11...
Page 70: Copying While Erasing An Area Around The Document
The width of the erased area refers to how much of the document will be erased. If enlarged or reduced copies are made, the same width is erased and an enlarged or reduced copy is printed. Position the document to be copied. 3-12 Di2510f/Di3510f...
Page 71 Press the [COPY] key, and then touch [AUXILIARY] followed by [EDGE/FRAME ERASE] on the touch panel. Select the desired position of the erased area. (Example: Erasing a frame) Touch the big arrow keys to specify the width of the erased area. Touch [ENTER]. Di2510f/Di3510f 3-13...
Page 72 Available Features Press the [START] key. 3-14 Di2510f/Di3510f...
Page 73: Reducing Paper Usage
Double-sided 2in1 copying and single-sided 4in1 copying reduce the paper usage by one fourth, and double-sided 4in1 copying reduces paper usage by one eighth. Load the document into the duplexing document feeder. The document can also be positioned on the original glass. Di2510f/Di3510f 3-15...
Page 74 Available Features Press the [COPY] key, and then touch [ORIG. > COPY] followed by [4IN1/BOOKLET] on the touch panel. Touch [DOUBLE-2IN1]. Press the [START] key. 3-16 Di2510f/Di3510f...
Page 75: Reducing Electricity Usage
Press the [UTILITY] key. Touch [USER’S CHOICE]. Touch [3/6]. To specify settings for the Energy Save mode, continue with step 4. To specify settings for the Sleep mode, skip to step 7. Touch [ENERGY SAVE MODE]. Di2510f/Di3510f 3-17...
Page 76 Energy Save mode. Touch [ENTER]. Touch [SLEEP MODE SETTING]. Use the keypad to specify the desired length of time until the machine enters Sleep mode. 3-18 Di2510f/Di3510f...
Page 77 Available Features Touch [ENTER]. Di2510f/Di3510f 3-19...
Page 78 Available Features 3-20 Di2510f/Di3510f...
Page 79: Before Making Copies
This is convenient when sending from an internal line to an external line and for the wait when information services are used. Sub power switch Use to turn the machine on and off..continued on next page Di2510f/Di3510f...
Page 80 [ACCESSIBILITY] key Press to activate or deactivate the user accessibility functions. [ENLARGE DISPLAY] Press to enlarge the screens that appear in the touch panel. [CONTRAST] dial Use to adjust the contrast of the touch panel. Di2510f/Di3510f...
Page 81: Checking The Settings
Touch [NEXT] or [BACK] until the screen containing the setting that you wish to change is displayed. Touch the button for the setting that you wish to change. The screen for specifying the setting appears. Change the setting according to the corresponding procedure. Di2510f/Di3510f...
Page 82: User Accessibility Operations
Press the [ACCESSIBILITY] key in the control panel. Touch [SCREEN MODE]. Touch [INVERTED SCREEN] to display the screens in white on black. To return the screens to the normal display, touch [NORMAL SCREEN]. Touch [ENTER]. Di2510f/Di3510f...
Page 83: To Change The Key Settings ("Key Speed Settings" Function)
Interval Time: Length of time (in seconds) that a key must be held down before repeatedly entering characters and numbers Example: When the [1] key is held down: Touch [ENTER]. Touch [CHECK] to check the specified settings. Di2510f/Di3510f...
Page 84: To Change The Auto Panel Reset Time ("Confirming Screen" Function)
The Energy Save, Sleep, and LCD Back-light Off functions are still operable even when the Auto Panel Reset function is configured. When setting Auto Panel Reset, please set it to a shorter period than the Energy Save, Sleep, and LCD Back-light Off functions. Di2510f/Di3510f...
Page 85: To Change The Display Time For The "The Job Is Accepted." Screen ("Notification Screen" Function)
Basic volume setting can be set in User Management. Press the [ACCESSIBILITY] key in the control panel. Touch [SOUND SETTING]. Select the desired volume setting. Touch [ENTER]. Di2510f/Di3510f...
Page 86: Enlarging The Touch Panel Screens
Touch in this area Touch in this area to scroll toward to scroll toward the lower-left the lower-right Touch this arrow to scroll down corner of the corner of the through the screen screen. screen. Di2510f/Di3510f...
Page 87: Turning The Machine On And Off
Before Making Copies Turning the Machine On and Off To turn on the machine Set the power switch to “I”. Make sure that the sub power switch has been pressed in. Di2510f/Di3510f...
Page 88: When The Machine Is Turned On
Do not turn off the machine while it is scanning or sending or receiving data, otherwise all scanned data or transmission data will be deleted. Do not turn off the machine while a queued job or stored data is waiting to be printed, otherwise the jobs will be deleted. 4-10 Di2510f/Di3510f...
Page 89: When The Main Switch Is Turned Off
The magnetic card is removed from the data controller or the key counter is removed. Note The settings specifying whether or not and the time until the auto panel reset operation is performed can be changed. For details, refer to “Changing Default Settings” on page 7-6. Di2510f/Di3510f 4-11...
Page 90: Energy Save Mode
The machine will not enter Sleep Mode while printing is paused. The settings specifying whether or not and the time until the machine enters Sleep mode can be changed. For details, refer to “Changing Default Settings” on page 7-6. 4-12 Di2510f/Di3510f...
Page 91 The control panel can be adjusted to any of three angles. Adjust the control panel to the angle that allows for easy operation. § Pull the control panel release lever, and then adjust the angle of the control panel. Di2510f/Di3510f 4-13...
Page 92: Using The Touch Panel
Number of copies: 1 Finishing: Non-Sort Zoom: 1.000 (Full Size) Paper: AutoPaper Density: Auto Exposure (Text/Photo mode) Orig. > Copy: Single-Sided > Single-Sided Fax mode Resolution: Standard Contrast: Medium Transmission mode: Memory transmission Reception mode: Automatic reception Transmission source: Within document 4-14 Di2510f/Di3510f...
Page 93: Auto-Mode Screen
Before Making Copies Auto-mode Screen This screen allows you to fax and copy without worrying about switching between them. Copy Screen This screen is for using copy functions. Di2510f/Di3510f 4-15...
Page 94: Fax Screen
This screen is for using fax functions. You can choose from the “One-touch Dialing Screen”, “Name Search Screen”, “Dialing Screen” and “Index Screen” for the screen that is displayed first. For details, refer to “Changing Default Settings” on page 7-6. 4-16 Di2510f/Di3510f...
Page 95: Operating The Touch Panel
“Language Selected for LCD” function on the User’s Choice screen. For details, refer to “Changing Default Settings” on page 7-6. The default settings can be changed using the various functions on the User’s Choice screen. For details, refer to “Changing Default Settings” on page 7-6. Di2510f/Di3510f 4-17...
Page 96: Description Of The Screens
The current settings are shown with graphics. Additional message • The status of the job is shown with graphics. display • The remaining amount of memory and graphics warning about empty toner or an empty paper drawer are displayed here. 4-18 Di2510f/Di3510f...
Page 97: Job List Screen
Print: Displays the print status of documents being copied or printed Com.: Displays the results from sending and receiving faxes. Doc.: Bulletin board documents, documents in the confidential box, and stored documents can be checked. Di2510f/Di3510f 4-19...
Page 98: To Check The Status Of A Job
The statuses of up to four jobs are displayed. To view the status of a job that is not displayed, touch the arrow keys. Check the details, and then touch [ENTER]. To delete the currently selected job, select that job and touch [DELETE]. 4-20 Di2510f/Di3510f...
Page 99: To Check The Printing Order
Touch [JOB LIST]. Touch [PRINT ORDER]. Check the printing order. Touch the arrow keys to view other parts of the list. Up to 8 items in the printing order can be displayed. After checking the necessary information, touch [ENTER]. Di2510f/Di3510f 4-21...
Page 100: To Check/Delete Listed Items From The Print Screen
Select the job whose status you wish to check. Touch the arrow keys to view other parts of the list. After checking the necessary information, touch [ENTER]. Note To delete the job, select that job and touch [Delete]. 4-22 Di2510f/Di3510f...
Page 101: Memory Recall
The memory recall feature cannot be used if any of the following have occurred. A new document has been scanned. (The [START] key has been pressed.) The machine has been turned off. The [ACCESS] key or the [Interrupt] key has been pressed. Di2510f/Di3510f 4-23...
Page 102: To Use The Memory Recall Feature
[DELETE]. At this time, the Finishing setting and the number of copies can be changed. Press the [START] key. The copies are printed. After copying confidential documents, press the [DELETE] key to erase the data from the memory. 4-24 Di2510f/Di3510f...
Page 103: To Verify Transmission Activity
Documents awaiting transmission can only be deleted when [DELETE] is displayed. mark is displayed when designated time transmission is set. When [RETRY] is displayed, pressing it will resend the document. Touch [ENTER] until the original screen is returned to. Di2510f/Di3510f 4-25...
Page 104: To Confirm Reception Results
Press the arrow keys to retrieve the desired document. When waiting for polling reception, if you touch [RETRY], reception will commence. To delete documents awaiting polling reception, touch [Delete]. Touch [ENTER] until the original screen is returned to. 4-26 Di2510f/Di3510f...
Page 105: To Verify The Documents Saved On The Bulletin Board
Select the documents to be verified. Press the arrow keys to retrieve the desired document. Verify the details of the documents. Touch [PRINT] to print a document. Touch [DELETE] to delete a document. Touch [ENTER] until the original screen is returned to. Di2510f/Di3510f 4-27...
Page 106: To Verify The Documents Stored In The Confidential Box
Touch [CHECK] to display the detailed data. Touch [PRINT] to print a document. All documents in the confidential box are printed. Touch [DELETE] to delete a document. All documents in the confidential box are deleted. Touch [ENTER]. 4-28 Di2510f/Di3510f...
Page 107: To Check The General Documents Stored
Touch [JOB LIST]. Touch [DOC.], then touch [PUBLIC]. Verify the stored documents. Press the arrow keys to retrieve the desired document. Touch [PRINT] to print a document. Touch [DELETE] to delete a document. To transmit, touch [FORWARD]. Touch [ENTER]. Di2510f/Di3510f 4-29...
Page 108 Before Making Copies 4-30 Di2510f/Di3510f...
Page 109: Copy Operations
“*”, “#”, “0” or a number of three or more digits starting with a non-zero number. On the Di3510f, the Fax Screen is displayed when you input “*”, “#”, “0” or a number of four or more digits starting with a non-zero number. Di2510f/Di3510f...
Page 110: Making Basic Copies
For details, refer to “Specifying a Copy Density” on page 10-32. To erase a margin in the copy, to insert interleave while copying onto overhead projector transparencies, or to perform any other special operation, touch [Auxiliary]. For details, refer to chapter “6 Fax Operations”. Di2510f/Di3510f...
Page 111 Use the keypad to enter the desired number of copies. On the Di3510f, up to 999 copies can be printed. On the Di2510f up to 99 copies can be printed. To change the setting, press the [C] (clear) key, and then enter the correct setting.
Page 112: Stopping Copying
The message “Copy cycle temporarily suspended.” appears. To restart a job that has been stopped, press the [START] key. Copying continues. To delete the stopped copy job, select the button for the job that you wish to delete. The job is deleted. Di2510f/Di3510f...
Page 113: Interrupting A Copy Job
When the interrupt mode has completed, press the [INTERRUPT] key. The indicator on the [INTERRUPT] key goes off and the Interrupt mode is cancelled. The copy settings for the job before copying was interrupted appear, and copying of the job that was interrupted automatically continues. Di2510f/Di3510f...
Page 114: Making Copies Using Accounts
If [100 ACCOUNT 2] has been specified, pressing the [Access] key will display the screen shown at right. Touch the button for your account. Using the keypad, enter the 6-digit access code assigned to your account. Di2510f/Di3510f...
Page 115 Input Screen, and press the [Access] key. The Basics screen appears. Copying will take place using the desired copy mode. When copying has finished, press the [ACCESS] key again. The Settings Screen is displayed on the Account Number Input Screen. Di2510f/Di3510f...
Page 116: Adding Cover Pages
Load paper for the cover pages with the same orientation and size as the paper for the document. Note The optional duplexing document feeder must be installed. Cover Mode settings Front Cover: Blank Back Cover: None Front Cover: Blank Back Cover: Blank Front Cover: Blank Back Cover: With Image Di2510f/Di3510f...
Page 117 Copy Operations Front Cover: With Image Back Cover: None Front Cover: With Image Back Cover: Blank Front Cover: With Image Back Cover: With Image Di2510f/Di3510f...
Page 118: To Make Settings For The "Cover Mode" Function
“Cover Paper”. Select the paper drawer that contains the paper for the cover pages, and then touch [ENTER]. Touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-10 Di2510f/Di3510f...
Page 119: Page Insertion" Function
This function can be used together with the “Cover Mode” function. This function cannot be used together with booklet-printing and mixed original sizes. Note The optional duplexing document feeder must be installed. Paper Insertion settings Blank With Image Di2510f/Di3510f 5-11...
Page 120: To Make Settings For The "Page Insertion" Function
“Insert Paper”. Select the paper drawer that contains the paper for the interleaves, and then touch [ENTER]. Touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-12 Di2510f/Di3510f...
Page 121: Ohp Interleaving" Function
When copying overhead projector transparencies, paper (interleaves) can be inserted between copies of the transparencies. Load the paper for the interleaves into a paper drawer, and load the overhead projector transparencies into the multiple bypass tray. OHP Interleaving settings Blank With Image Di2510f/Di3510f 5-13...
Page 122: To Make Settings For The "Ohp Interleaving" Function
“Insert Paper”. Select the paper drawer that contains the paper for the transparency interleaves, and then touch [ENTER]. Touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-14 Di2510f/Di3510f...
Page 123: File Margin" Function
The image of the document is shifted to the right to make a margin along the left edge of the copy. The image of the document is shifted to the bottom to make a margin along the top edge of the copy. Di2510f/Di3510f 5-15...
Page 124: To Make Settings For The "File Margin" Function
Touch the big arrow keys to specify the width of the binding margin, and then touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-16 Di2510f/Di3510f...
Page 125: Edge/Frame Erase" Function
When copying documents with punch holes, the pages can be printed with part of the document erased. Edge/Frame Erase settings The left side of the document is erased. The top edge of the document is erased. A frame around the document is erased. Di2510f/Di3510f 5-17...
Page 126: To Make Settings For The "Edge/Frame Erase" Function
Select the desired Edge/Frame Erase setting. Touch the big arrow keys to specify the width of the erased area, and then touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-18 Di2510f/Di3510f...
Page 127: Image Repeat" Function
Load the document into the duplexing document feeder or position it on the original glass. Press the [COPY] key. Touch [AUXILIARY], and then touch [IMAGE REPEAT]. Touch [SIZE INPUT]. To automatically detect the document size, touch [AUTO DETECT]. Di2510f/Di3510f 5-19...
Page 128 Touch [Y]. Use the keypad to type in the length of side Y for the paper that is loaded. Touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-20 Di2510f/Di3510f...
Page 129: Distribution #" Function
After “999” is printed, the number returns to “000”. To make settings for the “Distribution #” function Load the document into the duplexing document feeder or position it on the original glass. Press the [COPY] key. Touch [AUXILIARY], and then touch [IMAGE SETTINGS]. Touch [DISTRIBUTION #]. Di2510f/Di3510f 5-21...
Page 130 Touch [DARKER], [NORMAL] or [LIGHTER] to specify the print density for the distribution number. Touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-22 Di2510f/Di3510f...
Page 131: Watermark" Function
If [FIRST PAGE ONLY] is selected, the watermark is only printed on the first page of each copy set. If [ALL PAGES] is selected, the watermark is printed on all copies. Di2510f/Di3510f 5-23...
Page 132 Copy Operations Touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-24 Di2510f/Di3510f...
Page 133: Image Stamping" Function
The optional hard disk drive must be installed. To make copies using the “Image Stamping” function Load the document into the duplexing document feeder or position it on the glass. Press the [COPY] key. Touch [AUXILIARY], and then touch [IMAGE SETTINGS]. Touch [IMAGE STAMPING]. Di2510f/Di3510f 5-25...
Page 134 If [ALL PAGES] is selected, the image is printed on all copies. Touch [ENTER]. If [CANCEL] is touched, the setting is cancelled. Press the [START] key. The copies are printed. 5-26 Di2510f/Di3510f...
Page 135: Black-White Reverse" Function
To set the “Black-White Reverse” function Load the document into the duplexing document feeder or position it on the original glass. Press the [COPY] key. Touch [AUXILIARY], and then touch [BLACK-WHITE REVERSE]. Press the [START] key. The copies are printed. Di2510f/Di3510f 5-27...
Page 136: Separate Scan" Function
[START] key. After all document batches have been scanned, touch [FINISH]. Press the [START] key. The copies are printed. 5-28 Di2510f/Di3510f...
Page 137: Fax Operations
Automode screen can be displayed by pressing the [PANEL RESET] key twice. For the priority screen setting, refer to “Changing Default Settings” on page 7-6. Sending a fax Put the original document in place. Input the fax number using the keypad, and then press the [START] key. Di2510f/Di3510f...
Page 138: Copying
[ONE-TOUCH] mode is set on the initial screen. For the display of the other fax address modes, refer to “Changing Default Settings” on page 7-6. The Copy Screen is displayed by pressing the [COPY] key in the control panel. Di2510f/Di3510f...
Page 139 The Index List Screen This is displayed by touching [INDEX LIST] in the One-Touch screen. There are a total of 36 index keys, and up to 15 one-touch keys can be registered for each index key. Touching [ENTER] displays the One-Touch screen. Di2510f/Di3510f...
Page 140 Fax Operations The Search Screen This screen searches for the fax destinations by name. Touch [SEARCH] displays a screen which searches for destinations by name. The 10-key Dialing Screen This screen designates the fax destinations by using the keypad. Di2510f/Di3510f...
Page 141 Fax Operations The Quality & Reduction Screen This screen is for setting the quality, density and reduction when sending a fax. The FAX Menu Screen This screen is for setting communications functions. Di2510f/Di3510f...
Page 142: Displaying The Copy Screen
The Copy Screen is displayed by pressing the [Copy] key in the control panel. Copy Screen This is the screen for using the copy functions. The Fax Screen is displayed by pressing the [FAX/SCAN] key in the control panel. Di2510f/Di3510f...
Page 143: Registration Necessary At Startup
“One-Touch Key Index Search”, and “FAX Program Transmission” functions can be used. Setting items Reference One-Touch Key “One-Touch Dial Number Registration” on page 11-5 Index Key “Registering Index Lists” on page 11-1 FAX Program Key “FAX Program Registration” on page 11-12 Di2510f/Di3510f...
Page 144: Regarding Onscreen Notations
Reading fax original Dialing Transmitting fax Waiting for redial Receiving fax In manual reception mode Document with polling transmission wait Document registered on bulletin board Received document in box Printing Document with print wait Document with memory recall wait Copying Di2510f/Di3510f...
Page 145 Fax Operations Icon Notation Receiving print data from PC There are still print jobs from the PC that have not been printed Account management is specified Replace toner bottle Replace the Imaging Unit Add paper Di2510f/Di3510f...
Page 146: Sending A Fax (Auto-Mode Screen)
Only one fax can be sent at a time from the Auto-mode Screen. If registered in one-touch key, then up to the first 5 faxes can be displayed on the Auto-mode Screen. Refer to “One-Touch Dial Number Registration” on page 11-5. 6-10 Di2510f/Di3510f...
Page 147: Performing Dial Transmission
If transmission fails such as when the destination fax Fails is busy, a TX report is printed. TX reports are not printed for real-time transmission. You can resend documents that could not be initially sent (Max. 20 documents). Di2510f/Di3510f 6-11...
Page 148: When Setting In The Paper Feed Tray
Press the [START] key. To interrupt a transmission, press the [STOP] key, and select the job to interrupt. Note The amount of memory used varies with the type and size of the original, the transmission mode, etc. 6-12 Di2510f/Di3510f...
Page 149: When Setting On The Glass
Set the original on the glass, and close the cover. Press the [FAX/SCAN] key. Touch [10-KEY DIALING]. Input the fax number of the destination with the ten-key pad. Press the [C] key to clear the number. Press the [START] key. Di2510f/Di3510f 6-13...
Page 150 Fax Operations Set the next original, touch [RESTART SCAN], then press the [START] key. After scanning of the original to be transmitted is finished, touch [SCAN END], then press the [START] key. 6-14 Di2510f/Di3510f...
Page 151: Quality Adjustment
When Transmitting After Adjusting the Quality Set the original in the paper feed tray or on the glass. Press the [FAX/SCAN] key. Touch [QUALITY&REDUCTION]. Touch [QUALITY] and set the resolution. Designate the destination and press the [START] key. Di2510f/Di3510f 6-15...
Page 152: Density Adjustment
Transmitting to Match the Density and Color of the Original Set the original in the paper feed tray or on the glass. Press the [FAX/SCAN] key. Touch [QUALITY&REDUCTION]. Touch [CONTRAST] and set the density. Designate the destination and press the [START] key. 6-16 Di2510f/Di3510f...
Page 153: Reducing The Original
Set the original in the paper feed tray or on the glass. Press the [FAX/SCAN] key. Touch [QUALITY&REDUCTION]. Touch [REDUCTION/AREA], then touch [REDUCTION]. When you selected the [SCAN AREA] key, see “Designating the Scan Range for the Original” on page 6-36. Touch [AUTO SIZE] or [NO REDUCTION]. Di2510f/Di3510f 6-17...
Page 154 (× 1.000) regardless of the paper size in the receiving fax machine. Designate the destination and press the [START] key. Note If the paper in the receiving fax machine is smaller than the original, parts of the original may not be printed. 6-18 Di2510f/Di3510f...
Page 155: Automatic Fax Reception
When you have received documents on A4, B5 L, or A5 L, even if the paper orientation is different, they will be rotated 90° before printing (rotated recording). The receipt method can be changed by the Utility settings. Di2510f/Di3510f 6-19...
Page 156: Manual Fax Reception
With fax communications, you can receive documents after lifting the receiver and checking for the fax transmission sound. See page 6-59 for the procedure for receiving manually. When the call is a telephone call, you can talk. Note In manual reception, an external telephone is necessary. 6-20 Di2510f/Di3510f...
Page 157: Using The Telephone And Receiving Calls
The ringing sound is audible. Designation using the One-touch keys (See page 6-30). Performing dial transmission (See page 6-11). Designation using the fax program (See page 6-33). Speak when the destination answers. When done talking, hang up the telephone receiver. Di2510f/Di3510f 6-21...
Page 158: Placing A Telephone Call With The Telephone Receiver Hung Up
When done talking, hang up the telephone receiver. Receiving Telephone Calls You must set it for receiving manually. See page 6-59 for how to set up manual receiving. Pick up the telephone receiver upon hearing a ring. When done talking, hang up the telephone receiver. 6-22 Di2510f/Di3510f...
Page 159: Sending A Fax After A Phone Call
Hang up the telephone receiver. During fax transmission, hang up the handset of the external phone unit. If you lift the handset of the external phone unit during fax transmission, it may reduce the communication speed or cause communication errors. Di2510f/Di3510f 6-23...
Page 160: Verification Of Results
This displays the documents saved in the confidential box. Print or delete the documents saved in the confidential box. • [PUBLIC]: This displays the general documents stored by received document management. Print, transfer, or delete the stored documents. 6-24 Di2510f/Di3510f...
Page 161: Verifying The Job Status
Up to 4 jobs can be displayed on one screen. Press the arrow keys and the following screen will be displayed. View details by selecting the desired job key. Touch [DELETE] to delete a document. Touch [EXIT] until the original screen is returned to. Di2510f/Di3510f 6-25...
Page 162: Verifying The Print Order
Verify the print order. Up to 4 lists can be displayed on one screen, up to a maximum of 8. Press the arrow keys and the following screen will be displayed. Touch [ENTER] until the original screen is returned to. 6-26 Di2510f/Di3510f...
Page 163: Verifying The Print Status
Up to 4 lists can be displayed on one screen. Press the arrow keys and the following screen will be displayed. Touch [DELETE] to delete a document. Touch [EXIT] until the original screen is returned to. Di2510f/Di3510f 6-27...
Page 164: Verifying Transmission Activity
Documents awaiting transmission can only be deleted when [DELETE] is displayed. mark is displayed when designated time transmission is set. When [RETRY] is displayed, pressing it will resend the document. Touch [ENTER] until the original screen is returned to. 6-28 Di2510f/Di3510f...
Page 165: Verifying Reception Activity
Press the arrow keys to display the next result. Reception will start if the [RETRY] key is pressed while awaiting polling reception. Touch [DELETE] to delete a document awaiting polling reception. Touch [ENTER] until the original screen is returned to. Di2510f/Di3510f 6-29...
Page 166: Transmitting Various Faxes
When the original is set on the original glass, after is scanned, touch [SCAN END]. Check the transmission content in the notification screen. When multiple destinations have been specified, check the transmission content of each transmission in the notification screen, and touch [ENTER]. 6-30 Di2510f/Di3510f...
Page 167: Transmitting By A One-Touch Number
When the original is set on the original glass, after is scanned, touch [SCAN END]. Check the transmission content in the notification screen. When multiple destinations have been specified, check the transmission content of each transmission in the notification screen, and touch [Enter]. Di2510f/Di3510f 6-31...
Page 168: Transmission After Searching By Destination
[ENTER]. The input name of the destination can be up to 12 characters long, and input in alphanumeric characters. The destination as specified, corresponding to the input name is displayed. Select the desired recipient and touch [START]. 6-32 Di2510f/Di3510f...
Page 169: Transmitting By A Fax Program
“FAX Program Registration” on page 11-12. Set the original in the paper feed tray or on the glass. Press the [FAX/SCAN] key. Touch [ONE-TOUCH], then touch the fax program key. Verify the displayed content. Pressing the [START] key scans the original. Di2510f/Di3510f 6-33...
Page 170: Transmitting To Multiple Destinations
When the notification screen is displayed, select the destination and document number, and touch [ENTER]. Note A maximum of 300 One-Touch designations can be set, and a maximum of 12 dial transmission designations. It is possible to check the results of broadcast transmission. (See page 6-28) 6-34 Di2510f/Di3510f...
Page 171: Transmitting With Chain Dial
Destinations can be selected either by inputting using the number pad, or by using [ONE-TOUCH DIALING]. Press the [START] key. When calling using Chain Dial, you can dial up to a maximum of 192 digits. Di2510f/Di3510f 6-35...
Page 172: Designating The Scan Range For The Original
Designating the Scan Range for the Original It is possible to designate a scan area during original transmission. Set the original on the original feed device or the original glass. Press the [FAX/SCAN] key. Touch [QUALITY&REDUCTION]. Touch [REDUCTION/AREA], then touch [SCAN AREA]. 6-36 Di2510f/Di3510f...
Page 173 Touch [INCH] when setting a scan area in inches. Designate the destination. Designation using the One- touch keys (See page 6-30). Performing dial transmission (See page 6-11). Designation using a fax program (See page 6-33). Press the [START] key. Di2510f/Di3510f 6-37...
Page 174: Transmission With Name And Number On The Original (Tsi)
Designate the destination. Designation using the One- touch keys (See page 6-30). Performing dial transmission (See page 6-11). Designation using a fax program (See page 6-33). Press the [START] key. The TSI designation is released once transmitted. 6-38 Di2510f/Di3510f...
Page 175 Where there are multiple transmission names registered, the factory default settings are set to the name registered in transmission number 1. Refer to “Transmission Settings” on page 12-28 This can be set to the TSI as set in Utility mode. Di2510f/Di3510f 6-39...
Page 176: Inserting The Destination
Destination insertion cannot be designated during dial transmission or chain-dial transmission. These TSI can be up to 20 characters in length. Destination insertion can only be set when the TSI in set. For details, refer to “Registering TSI Names” on page 12-24. 6-40 Di2510f/Di3510f...
Page 177: Outputting The Activity Report
Performing dial transmission (See page 6-11). Designation using a fax program (See page 6-33). Press the [START] key. Transmission starts, and the TX report is output. The TX report indication returns to the [DEFAULT] state once transmission is performed. Di2510f/Di3510f 6-41...
Page 178: Transmitting 2In1
Use the paper feed tray when 2in1 transmission is designated. The original sizes that can be 2in1 transmitted are A4 C and A5 C. 2in1 transmission cannot be set at the same time as double-sided transmission, TX rotation and real-time transmission.. 6-42 Di2510f/Di3510f...
Page 179: Transmitting A Double-Sided Original
Touch [FAX MENU]. Touch [SET 1], then touch [2-SIDED TX]. Select document margin and document direction, and touch [ENTER]. Select from [STANDARD BOOK], [TOP MARGIN], and [AUTO], when setting document margins. The settings are released by touching [CANCEL]. Di2510f/Di3510f 6-43...
Page 180 Even if a double-sided original is transmitted, the receiving fax will print it on single- sided sheets. Double-sided transmission default settings can be changed in the Admin.1 screen. The default setting is “OFF”. For details, refer to “Transmission Settings” on page 12-28. 6-44 Di2510f/Di3510f...
Page 181: Transmitting A4 Paper Set To Landscape
Designate the destination. Designation using the One- touch keys (See page 6-30). Performing dial transmission (See page 6-11). Designation using a fax program (See page 6-33). Press the [START] key. The TX rotation designation is released once transmitted. Di2510f/Di3510f 6-45...
Page 182 TX rotation cannot be set at the same time as real-time transmission and 2in1 transmission. TX rotation transmission default settings can be changed in the Admin.1 screen. The default setting is “ON”. For details, refer to “Transmission Settings” on page 12-28. 6-46 Di2510f/Di3510f...
Page 183: Transmitting With Prioritization
Designation using the One- touch keys (See page 6-30). Performing dial transmission (See page 6-11). Designation using a fax program (See page 6-33). Press the [START] key. TX-priority and real-time transmission cannot be designated at the same time. Di2510f/Di3510f 6-47...
Page 184: Transmitting At A Designated Time
SET]. Input the transmission time using the ten-key pad, then touch [ENTER]. Input the time in 24-hour notation. Press the [C] key to clear the number. The settings are released by touching [CANCEL]. Input “00:00” for 0:00 am. 6-48 Di2510f/Di3510f...
Page 185 Designated time transmission is released once transmitted. Time designated transmission cannot be set at the same time as real- time transmission and priority-TX. When using time designated transmission, up to 200 transmissions can be stored for transmission. Di2510f/Di3510f 6-49...
Page 186: Placing A Stamp On The Transmitted Document
Designation using the fax program (See page 6-33). Press the [START] key. During real-time and manual transmission, the stamp is applied after successful transmission to the destination. During memory transmission, the stamp is applied to pages properly stored in the memory. 6-50 Di2510f/Di3510f...
Page 187 There is no stamping when in copy mode. Whether or not to place a stamp, and its location can be changed in the Admin.2 screen. Default settings are “OFF” and “Top&Bottom”. For details, refer to “Configuring Functions (Soft Switches)” on page 12-56. Di2510f/Di3510f 6-51...
Page 188: Transmitting While Scanning The Original (Real-Time Transmission)
The real-time designation is released once transmitted. Real-time transmission cannot be used during transmission or reception. Multiple destinations cannot be designated in real-time transmission. Real-time transmission cannot be set at the same time as 2in1 transmission, double-sided transmission and time designed transmission. 6-52 Di2510f/Di3510f...
Page 189: Performing Password Transmission
Designate the destination. Designation using the One- touch keys (See page 6-30). Performing dial transmission (See page 6-11). Designation using the fax program (See page 6-33). Press the [START] key. The Password TX designation is released once transmitted. Di2510f/Di3510f 6-53...
Page 190: Remote Copying
[ENTER]. Between 2 and 99 copies can be set. Designate the destination. Designation using the One- touch keys (See page 6-30). Performing dial transmission (See page 6-11). Designation using the fax program (See page 6-33). 6-54 Di2510f/Di3510f...
Page 191 Fax Operations Press the [START] key. The remote copying designation is released once transmitted. The maximum number of remote copies is 99. Remote copy transmission is not possible if the destination does not respond to the F code. Di2510f/Di3510f 6-55...
Page 192: Polling Transmission
Set the original in the paper feed tray or on the glass. Press the [FAX/SCAN] key. Touch [FAX MENU]. Touch [APPL.], then touch [POLLING TX]. Specify the quality, then touch [NEXT]. 6-56 Di2510f/Di3510f...
Page 193 The document in the memory is deleted after transmission. Polling transmission is not possible when the memory is full. The transmission cost of the polling transmission is borne by the receiver. Only one document can be designated for polling transmission. Di2510f/Di3510f 6-57...
Page 194: Receiving Various Faxes
A communication password must be registered beforehand. (Refer to “Password Registration for Password Communication” on page 12-41.) The transmitting machine needs to have the same password as that registered on this machine. Communication is sometimes not possible due to the device type on the transmitting side. 6-58 Di2510f/Di3510f...
Page 195: Setting Manual Reception
If you lift the handset of the external phone unit during fax transmission, it may reduce the communication speed or cause communication errors. Press the [UTILITY] key. Touch [ADMIN. MANAGEMENT] and input the password. Touch [ADMIN. 1]. Di2510f/Di3510f 6-59...
Page 196 Fax Operations Touch [FAX SETTING]. Touch [RX FUNCTIONS]. Touch [RECEPTION MODE]. Touch [MANUAL]. Touch [ENTER] until the basic screen is returned to. 6-60 Di2510f/Di3510f...
Page 197: Performing Manual Reception
A beep sounds when reception is complete. During fax transmission, hang up the handset of the external phone unit. If you lift the handset of the external phone unit during fax transmission, it may reduce the communication speed or cause communication errors. Di2510f/Di3510f 6-61...
Page 198: Performing Polling Reception
TOUCH], [SEARCH], or [10-KEY DIALING]. " When Designating by One- Touch Dialing § It is necessary to register an F code beforehand. " When Designating by Dial Input § Input the fax numbers using the ten-key pad, then touch [F- CODE]. 6-62 Di2510f/Di3510f...
Page 199 Input the time in 24-hour notation. Press the [C] key to clear the number. Touch [TIMER OFF] to start polling transmission after setting. Press the [START] key. Touch [ENTER]. It is possible to designate the reception time. Di2510f/Di3510f 6-63...
Page 200: Using The Document Functions
Stored documents can be printed and deleted. Public Documents saved on the bulletin board, and documents stored by received document management (not in the confidential box) are displayed. Stored documents can be printed, forwarded, or deleted. 6-64 Di2510f/Di3510f...
Page 201: Verifying The Documents Saved On The Bulletin Board
Select the documents to be verified. Touch the arrow keys to retrieve the desired document. Verify the details of the documents. Touch [PRINT] to print a document. Touch [DELETE] to delete a document. Touch [ENTER] until the original screen is returned to. Di2510f/Di3510f 6-65...
Page 202: Verifying The Documents Stored In The Confidential Box
Touching [CHECK] displays the detailed data. Touch [PRINT] to print a document. Prints all documents in the confidential box. Touch [DELETE] to delete a document. Deletes all documents in the confidential box. Touch [ENTER]. 6-66 Di2510f/Di3510f...
Page 203: Checking The General Documents Stored
Touch [PRINT] to print a document. Once printed, documents are deleted. Touch [DELETE] to delete a document. To forward, touch [FORWARD], and select the recipient. Documents that have been transmitted are deleted. Touch [ENTER]. Di2510f/Di3510f 6-67...
Page 204: F Codes
This is a function where communication is possible only then an F code is set beforehand in the confidential box, and it coincides with the F code designated by the destination. Because passwords can be set for documents in the confidential box, it is possible to safely fax these documents. 6-68 Di2510f/Di3510f...
Page 205: F Code Confidential Transmission
One F code can be designated per transmission when F codes are designated in the 10-key dialing screen. Touch [F-CODE (SID/PWD)] and input the password when an F code password is needed. Touch [ENTER]. Press the [START] key. Di2510f/Di3510f 6-69...
Page 206: The Bulletin Board
1~10 and if the F code is not found, it is searched for in confidential boxes 1~10. Number management classified by confidential box and bulletin board functions is recommended. The remote code can be set using [FAX MENU]. For details, see “Remote Copying” on page 6-54 6-70 Di2510f/Di3510f...
Page 207: Registration Of Documents On Bulletin Boards
When saving documents to the bulletin board from other fax machines, designate the F codes and F code passwords registered to each bulletin board number. Documents cannot be saved to bulletin boards unless the F codes and F Code passwords match. Di2510f/Di3510f 6-71...
Page 208: Saving Documents To Bulletin Boards
Set the transmission function. TSI Setting (See page 6-38) Stamp Setting (See page 6-50) 2in1 Setting (See page 6-42) Double-sided Transmission Setting (See page 6-43) Rotation Setting (See page 6-45) Press the [START] key. The notification screen is displayed. Touch [ENTER]. 6-72 Di2510f/Di3510f...
Page 209: Saving Documents To Bulletin Boards From Other Fax Machines
Input the F password of the registered bulletin board to [F-CODE (SID/PWD)]. Touch the fax number to which the document is to be sent. Press the Communication key or the Start key. The document is saved on the bulletin board. Di2510f/Di3510f 6-73...
Page 210: Retrieving Bulletin Board Documents
It is necessary to register an F code beforehand. " When Designating by Dial Input § Input the fax numbers using the ten-key pad, then touch [F- CODE]. § Next, touch [F-CODE (SEF)], and input the F code using the ten- key pad. 6-74 Di2510f/Di3510f...
Page 211 Indicate the reception time using the ten-key pad. Input the time in 24-hour notation. Press the [C] key to clear the number. Touch [TIMER OFF] when not designating a time. Press the [START] key. The notification screen is displayed. Touch [ENTER]. Di2510f/Di3510f 6-75...
Page 212 Fax Operations 6-76 Di2510f/Di3510f...
Page 213: Utility Mode Operations
This screen appears when the [Utility] key is pressed. The following screens appear when the corresponding button is touched. User Set-up Screen Making changes in the initial screen of the machine, as well as registering and setting up functions for the FAX. Di2510f/Di3510f...
Page 214: Meter Count Screen
This screen shows the total number of copies printed since the machine was installed. Copy Job Program Recall screen From this screen, a programmed copy job can be recalled. User Management screen This screen provides various functions for safely and correctly using the machine. Di2510f/Di3510f...
Page 215: Administrator Management Screens
Management 2. The administrator access code must be entered before these screens can be displayed. For details on the functions available from the Administrator Management screens, refer to “8 Administrator Management Operations” and “9 Setting and FAX Items for the Administrator”. Di2510f/Di3510f...
Page 216: User's Choice Functions
Sleep Mode Setting 1 to 240 minutes, 15 minutes LCD Back-light Off 1 to 240 minutes, 1 minutes Auto Panel Reset No Reset, 30 seconds, 1 min, 2 min, 3 min, 5 min Plug-In Counter, ID ON, OFF key Reset Di2510f/Di3510f...
Page 217 This function is available only if the saddle kit (sk-1) is installed. User’s Choice Priority Screen/ Copier, FAX, Auto Default Device Property Priority Screen/ One-Touch, Search, 10-key Priority FAX Screen Dialing, Index Density (ADF only) Mode 1, Mode 2 Di2510f/Di3510f...
Page 218: Changing Default Settings
If [ON] is selected, the previously copied image data can be printed again, even after copying has finished or while the copier is in stand-by. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f...
Page 219: To Set The "Mixed Original Detection" Function
Touch [USER SET], and then touch [USER’S CHOICE]. Touch [1/6], and then touch [MIXED ORIGINAL DETECTION]. Touch [ON] or [OFF], and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f...
Page 220: To Set The "Language Selected For Lcd" Function
Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. For details on changing the setting for the communication language, refer to “How to Set the Communication Language” on page 12-19. Di2510f/Di3510f...
Page 221: To Set The "Original > Copy Default" Function
Touch [USER SET], and then touch [USER’S CHOICE]. Touch [2/6], and then touch [ORIGINAL > COPY DEFAULT]. Select the desired setting, and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f...
Page 222: To Set The "Auto Paper/Auto Size" Function
Touch [USER SET], and then touch [USER’S CHOICE]. Touch [2/6], and then touch [AUTO PAPER/AUTO SIZE]. Select the desired setting, and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-10 Di2510f/Di3510f...
Page 223: To Set The "Drawer Priority" Function
Touch [USER SET], and then touch [USER’S CHOICE]. Touch [2/6], and then touch [DRAWER PRIORITY]. Select the desired paper drawer, and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-11...
Page 224: To Set The "Special Paper" Function
Special paper: Selecting this mode will mean that when using auto paper selection, this will not be included in auto tray change. When using colored paper for cover pages or interleaves, selecting this setting reduces operating errors. 7-12 Di2510f/Di3510f...
Page 225 Utility Mode Operations If a particular paper drawer is set to be loaded with special paper, the paper in that paper drawer will not be selected during automatic paper selection. Di2510f/Di3510f 7-13...
Page 226: To Set The "Multiple-In-1 And Booklet Copy Zoom" Function
Touch [ON] or [OFF], and then touch [ENTER]. If [OFF] is selected, specify the Zoom settings for the 2in1 and 4in1 Copy settings. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-14 Di2510f/Di3510f...
Page 227: To Set The "Energy Save Mode" Function
Use the keypad to specify the desired length of time, and then touch [ENTER]. (Specify a length of time between 1 and 240 minutes.) Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-15...
Page 228: To Set The "Sleep Mode Setting" Function
(Specify a length of time between 1 and 240 minutes.) Selecting the [NO RESET] key means that sleep functions will no longer operate. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-16 Di2510f/Di3510f...
Page 229: To Set The "Lcd Back-Light Off" Function
[EXIT] to return to the Basics screen. If the preheat and sleep settings are short because of the LCD Back- light being set to off, then the Backlight will be turned off after the specified preheat or sleep time. Di2510f/Di3510f 7-17...
Page 230: To Set The "Auto Panel Reset" Function
The length of time until the Basics screen is displayed can be set to 30 seconds, 1, 2, 3 or 5 minutes, or [NO RESET]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-18 Di2510f/Di3510f...
Page 231: To Set The "Plug-In Counter, Id Key Reset" Function
Touch [USER SET], and then touch [USER’S CHOICE]. Touch [3/6], and then touch [PLUG- IN COUNTER, ID KEY RESET]. Touch [ON] or [OFF], and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-19...
Page 232: To Set The "4In1 Copy Order" Function
Touch [4/6], and then touch [4IN1 COPY ORDER]. Select the page orientation for making 4in1 copies, and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-20 Di2510f/Di3510f...
Page 233: To Set The "Density Priority" Function
[AUTO] or [MANUAL]. The default Original Image Type can be set to [TEXT], [PHOTO] or [TEXT/PHOTO]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-21...
Page 234: To Set The "Default Copy Output Levels" Function
[LIGHTER], [NORMAL] or [DARKER]. The default Manual density level can be adjusted by one level at a time. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-22 Di2510f/Di3510f...
Page 235: To Set The "Printing Density" Function
Touch [USER SET], and then touch [USER’S CHOICE]. Touch [4/6], and then touch [PRINTING DENSITY]. Select the desired settings, and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-23...
Page 236: To Set The "Output Priority" Function
Touch [USER SET], and then touch [USER’S CHOICE]. Touch [4/6], and then touch [OUTPUT PRIORITY]. Select the desired settings, and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-24 Di2510f/Di3510f...
Page 237: To Set The "Intelligent Sorting" Function
“Sort” setting is automatically selected when a document consisting of two or more pages is placed in the duplexing document feeder. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-25...
Page 238: To Set The "Output Tray" Function (Optional)
Touch [5/6], and then touch [OUTPUT TRAY]. Touch [RECEPT PRINT] or [COPIER/PRINTER], and then touch [ENTER]. To specify the output tray for received faxes, touch [RECEPT PRINT]. To specify the output tray for copies and computer printouts, touch [COPIER/PRINTER]. 7-26 Di2510f/Di3510f...
Page 239 Utility Mode Operations Select the appropriate output tray settings, and then touch [ENTER]. After touching [RECEPT PRINT] After touching [COPIER/ PRINTER] Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-27...
Page 240: To Set The "Small" Originals" Function
If [OFF] is selected, a message appears, indicating that the paper should be selected. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-28 Di2510f/Di3510f...
Page 241: To Set The "Scanner Dry" Function
[ENTER]. Specify the time in the 24-hour format. To erase the value, press the [C] (clear) key. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-29...
Page 242: To Set The "Crease/Center Staple" Function
Touch [USER SET], and then touch [USER’S CHOICE]. Touch [5/6], and then touch [CREASE/CENTER STAPLE]. Touch the arrow keys to adjust the setting, and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 7-30 Di2510f/Di3510f...
Page 243: Selecting The Priority Screen
[FAX/SCAN] button is pressed on the Priority Fax Screen. Press the [UTILITY] key. Touch [USER SET], and then touch [USER’S CHOICE]. Select the [6/6] tab, and then touch [PRIORITY SCREEN]. Touch [DEFAULT DEVICE PRIORITY] or [PRIORITY FAX SCREEN] key. Di2510f/Di3510f 7-31...
Page 244 Utility Mode Operations Select the desired screen from the display, and then touch [ENTER]. Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basic screen. 7-32 Di2510f/Di3510f...
Page 245: To Set The "Density (Adf Only)" Function
The setting on the right is most appropriate for scanning faint document (such as those written with pencil). Touch [END] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-33...
Page 246: Registering An Image Stamp
To erase a stored image, touch [Delete], and then touch the number from where you wish to delete the image. To check a stored image, touch [Check], and then touch the number where the image that you wish to check is stored. 7-34 Di2510f/Di3510f...
Page 247 Y for the image document (between 25 and 297 mm). Touch [Enter]. Position the document on the glass, and then select the orientation of the document. Press the [Start] key. The image is scanned. The image stamp is registered. Di2510f/Di3510f 7-35...
Page 248: Viewing Counters ("Meter Count" Function)
To view the counters Press the [UTILITY] key. Touch [METER COUNT]. After checking the various counters, touch [EXIT]. There are two Meter Count screens. To view the other screen, touch [NEXT]. Touch [EXIT] to return to the Basics screen. 7-36 Di2510f/Di3510f...
Page 249: Using Copy Programs
Touch [CHECK], and then touch a number button. Check the programmed settings. To display screen 2/2, touch [NEXT]. To return to screen 1/2, touch [BACK]. Touch [ENTER] to return to the Mode Check screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 7-37...
Page 250: To Delete A Copy Program
[DELETE]. The copy program is deleted, and appears on the button. Touch [EXIT] to return to the Mode Check screen, and then touch [EXIT] to return to the Basics screen. 7-38 Di2510f/Di3510f...
Page 251: To Use A Copy Program
Touch the button assigned with the copy program that you wish to use. Only buttons that have been assigned a copy program are displayed. Check the settings, and then touch [ENTER]. Set the document, and press the [START] key. Di2510f/Di3510f 7-39...
Page 252: User Management Functions
(Default setting: 3) [LINE MONITOR VOLUME]: This function is used to adjust the volume of the telephone line that can be heard through the speaker. (Initial value: 3) 7-40 Di2510f/Di3510f...
Page 253: To Clean The Touch Panel ("Panel Cleaning" Function)
To clean the touch panel (“Panel Cleaning” function) By setting panel cleaning, you can clean the panel without accidentally pressing panel buttons. Press the [UTILITY] key. Touch [USER MANAGEMENT], and then touch [PANEL CLEANING]. To cancel the function, press the [PANEL RESET] key. Di2510f/Di3510f 7-41...
Page 254: To Dehumidify The Duplexing Document Feeder ("Dehumidify" Function)
If this occurs, toner can be replenished. Press the [UTILITY] key. Touch [USER MANAGEMENT], and then touch [TONER REPLENISHER]. The toner is replenished. 7-42 Di2510f/Di3510f...
Page 255: Copy Paper
— — 3rd paper drawer (LCC*) — — — — 3rd paper drawer — — — — 4th paper drawer — — — — Double-sided copies — — — — * LCC: Large-capacity cabinet O: Available —: Not available Di2510f/Di3510f...
Page 256: Paper Sizes
Paper Source, Etc. B6 L Multiple bypass tray 1st paper drawer — 2nd paper drawer — 3rd paper drawer (LCC*) — 3rd paper drawer — 4th paper drawer — Double-sided copies * LCC: Large-capacity cabinet O: Available —: Not available Di2510f/Di3510f...
Page 257: Paper Capacity
If the optional finisher is used to sort/group, punch holes and staple, only plain paper can be used. The paper size setting for the 3rd paper drawer (large-capacity cabinet) can be changed in order to load Letter-size paper. Contact your service representative to change the paper size setting. Di2510f/Di3510f...
Page 258: Unsuitable Paper
Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached Curled or wrinkled paper Art paper, coated paper or inkjet printer paper Di2510f/Di3510f...
Page 259: Print Area
Not exposed to direct sunlight Not exposed to a flame Not exposed to high humidity Not extremely dusty Unwrapped paper should be placed in a plastic bag and stored in a cool, dark location. Keep paper out of the reach of children. Di2510f/Di3510f...
Page 260: Automatically Selecting The Paper Source
Multiple Bypass Tray, the auto tray change function may be started, and may supply the wrong paper. We recommend that you make selections for special media in the User’s Choice Special Settings. For details, refer to “User’s Choice Functions” on page 7-4. Di2510f/Di3510f...
Page 261: Loading Paper
We recommend replenishing the paper only after all of the paper in the drawer has been used. Di2510f/Di3510f...
Page 262: Loading Paper Into The 1St/2Nd/3Rd/4Th Paper Drawer
(the side facing up when the package was unwrapped) faces up. Be careful not to touch the mylar. Re-adjust the paper guides to fit the size of the paper. Close the paper drawer. Di2510f/Di3510f...
Page 263: Loading Paper Into The Large-Capacity Cabinet
Be careful not to touch the mylar. Load the paper into the left side of the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces Di2510f/Di3510f...
Page 264: Loading Paper Into The Multiple Bypass Tray
Note Do not load so much paper that the top of the stack is higher than the M mark. Make sure that the paper guides are pushed up against the edges of the paper. 8-10 Di2510f/Di3510f...
Page 265: To Load Postcards
Note Do not load more than 50 postcards. Do not load postcards crosswise. After you have loaded the paper, set the paper type for the Multiple Bypass Tray in the touch panel. Di2510f/Di3510f 8-11...
Page 266: To Load Envelopes
Do not load more than 10 envelopes. After you have loaded the paper, set the paper type for the Multiple Bypass Tray in the touch panel. Note Do not load envelopes crosswise. Do not place the flap of envelopes facing down. 8-12 Di2510f/Di3510f...
Page 267: To Load Overhead Projector Transparencies
Place paper with the side to be printed facing down. Note Do not load more than 50 label sheets. After you have loaded the paper, set the paper type for the Multiple Bypass Tray in the touch panel. Di2510f/Di3510f 8-13...
Page 268: To Set A Non-Standard (Custom) Paper Size
Then, using the keypad, type in the length of side X for the paper. Touch [Y] an d press the [C] key. Then, using the keypad, type in the length of side Y for the paper. Touch [ENTER]. 8-14 Di2510f/Di3510f...
Page 269 Copy Paper Note Where you do not wish to set the custom size, press the [Panel Reset] key, or exceed the auto panel reset time, and this will reset to the default settings. Di2510f/Di3510f 8-15...
Page 270: To Store A Non-Standard (Custom) Paper Size
[MODE CHANGE]. Touch [CUSTOM SIZE]. The Custom Size screen appears. Touch [MEMORIZE PAPER SIZE]. Touch [X] and press the [C] key. Then, using the keypad, type in the length of side X for the paper. 8-16 Di2510f/Di3510f...
Page 271 To store another custom paper size, repeat steps 4, 5 and 6. Touch [ENTER]. This completes the storing of custom paper sizes. Di2510f/Di3510f 8-17...
Page 272: To Select A Stored Non-Standard (Custom) Paper Size
Touch the button for the multiple bypass tray, and then touch [MODE CHANGE]. Touch [CUSTOM SIZE]. Touch either [1] or [2] to select the stored custom paper size, and then touch [ENTER]. Press the [START] key. The copies are printed. 8-18 Di2510f/Di3510f...
Page 273: Selecting The Paper Setting
Touch the button for the multiple bypass tray, and then touch [MODE CHANGE]. Touch the button for the type of paper loaded into the multiple bypass tray, and then touch [ENTER]. Press the [START] key. The copies are printed. Di2510f/Di3510f 8-19...
Page 274 Copy Paper 8-20 Di2510f/Di3510f...
Page 275: Original Documents
Documents of Uniform Sizes Single-Sided Double-Sided Documents Documents Paper Type Plain Paper Plain Paper (35 to 128 g/m (50 to 128 g/m Document Size A3 L, B4 L, A4 L/C, B5 L/C, A5 L/C, B6 L Di2510f/Di3510f...
Page 276: Mixed Orig Detection" Function
— 182 mm B5 L — — — — 148 mm A5 L — — — — — — — 123 mm B6 L — — — — — — — * O: Copying possible —: Copying not possible Di2510f/Di3510f...
Page 277: Sizes Of Documents That Can Be Faxed
Note An area of 10 mm on all sides of the document cannot be scanned. When positioned on the original glass, any document with the A3T- size or smaller can be faxed. Di2510f/Di3510f...
Page 278: Precautions Concerning The Documents
Documents that have just been printed with this machine Documents on paper that cannot be fed Curled documents Wrinkled or torn documents Overhead transparencies If non-standard-sized paper is determined to be close to a standard size, copying with the “Auto Paper” or “Auto Size” settings is possible. Di2510f/Di3510f...
Page 279: Feeding The Document Through The Duplexing Document Feeder
Ä mark. Adjust the document guides to the size of the document. Be sure to load the document correctly, otherwise the pages may not be fed in straight. Make the various settings for faxing or copying. Di2510f/Di3510f...
Page 280 Original Direction setting, certain copy operations, such as 2in1 or 4in1 copying, will not be printed correctly. Press the [START] key. The pages of the document are fed in, starting with the topmost page. Di2510f/Di3510f...
Page 281: To Load A Document Of Mixed Sizes ("Mixed Orig Detection" Function)
Be sure to load the document correctly, otherwise the pages may not be fed in straight. Certain document size combinations are not possible with the “Mixed Orig Detection” function. For details, refer to “Mixed Width Document Sizes” on page 9-2. Di2510f/Di3510f...
Page 282 Original Documents In the Basics screen, touch [MIXED ORIG DETECTION]. Select the desired copy settings, and then press the [START] key. Di2510f/Di3510f...
Page 283: Positioning Documents On The Original Glass
“Feeding the Document Through the Duplexing Document Feeder” on page 9-5. When placing the document directly on the original glass, position it with the orientation shown below. Lift open the original cover, or the duplexing document feeder if it is installed, 15° or more. Di2510f/Di3510f...
Page 284: To Position Sheet Documents
Position the document so that it aligns with the arrow in the upper- left corner of the document scales. Carefully close the original cover, or the duplexing document feeder if it is installed. 9-10 Di2510f/Di3510f...
Page 285: To Position Transparent Or Translucent Documents
Place a blank sheet of paper of the same size over the document. Carefully close the original cover, or the duplexing document feeder if it is installed. Di2510f/Di3510f 9-11...
Page 286: To Position Books Or Magazines
Do not place documents exceeding 3 kg on the original glass. If a book is placed on the original glass, do not press it down with extreme force, otherwise the original glass may be damaged. For details, refer to “Copying a Book” on page 10-27. 9-12 Di2510f/Di3510f...
Page 287: Loading Documents For Specific Applications
7. Shows the selected File Margin setting from the Auxiliary screen if a binding margin is specified for the copy (page 5-15) 8. Shows the stapling or hole-punching position that must be selected (page 10-6 and page 10-8) Di2510f/Di3510f 9-13...
Page 288: Single-Sided Documents
Hole — — — Sided Punch 2-Point Staple Single- Hole — — Sided Punch 2-Point Staple Single- Corner — — — Sided Staple Single- Corner — — — Sided Staple Single- Hole — — Sided Punch 2-Point Staple 9-14 Di2510f/Di3510f...
Page 289 Single- Corner — — — 2in1 Staple Single- Hole — — 2in1 Punch 2-Point Staple Single- Hole — — — 2in1 Punch 2-Point Staple Single- Corner — — — 2in1 Staple Single- Corner — — — 2in1 Staple Di2510f/Di3510f 9-15...
Page 290 Single- Corner — — — 4in1 Staple Single- Corner — — — 4in1 Staple Single- Hole — — — 4in1 Punch 2-Point Staple Single- Hole — — 4in1 Punch 2-Point Staple Single- Corner — — — 4in1 Staple 9-16 Di2510f/Di3510f...
Page 291 Finishing Margin File Binding Setting Setting Setting Margin Position (Orig. Ö Setting Copy (Auxiliary Screen) Screen) Double- Corner — — — Sided Staple Double- Corner — — Sided Staple Double- Hole — — — Sided Punch 2-Point Staple Di2510f/Di3510f 9-17...
Page 292 Double- Hole — — — Sided Punch 2-Point Staple Double- Corner — — 2in1 Staple 3 4 5 6 Double- Corner — — — 2in1 Staple Double- Hole — — 2in1 Punch 3 4 5 6 2-Point Staple 9-18 Di2510f/Di3510f...
Page 293 — — 2in1 Staple Double- Hole — — — 2in1 Punch 2-Point Staple Double- Hole — — 2in1 Punch 2-Point Staple Double- Corner — — — 4in1 Staple Double- Corner — — 4in1 Staple 9 10 11 12 Di2510f/Di3510f 9-19...
Page 294 4in1 Staple 9 10 11 12 Double- Corner — — — 4in1 Staple 9 10 11 12 Double- Hole — — 4in1 Punch 9 10 11 12 2-Point Staple Double- Hole — — — 4in1 Punch 2-Point Staple 9-20 Di2510f/Di3510f...
Page 295: Left-Bound Double-Sided Documents
Staple Single- Hole — — — Sided Punch 2-Point Staple Single- Hole — — Sided Punch 2-Point Staple Single- Corner — — Sided Staple Single- Corner — — Sided Staple Single- Hole — — Sided Punch 2-Point Staple Di2510f/Di3510f 9-21...
Page 296 2in1 Staple Single- Corner — — — 2in1 Staple Single- Hole — — 2in1 Punch 2-Point Staple Single- Hole — — — 2in1 Punch 2-Point Staple Single- Corner — — 2in1 Staple Single- Corner — — 2in1 Staple 9-22 Di2510f/Di3510f...
Page 297 Staple Single- Corner — — — 4in1 Staple Single- Corner — — — 4in1 Staple Single- Hole — — — 4in1 Punch 2-Point Staple Single- Hole — — 4in1 Punch 2-Point Staple Single- Corner — — 4in1 Staple Di2510f/Di3510f 9-23...
Page 298 Finishing Margin File Binding Setting Setting Setting Margin Position (Orig. Ö Setting Copy (Auxiliary Screen) Screen) Double- Corner — — — Sided Staple Double- Corner — — Sided Staple Double- Hole — — — Sided Punch 2-Point Staple 9-24 Di2510f/Di3510f...
Page 299 Staple Double- Hole — — Sided Punch 2-Point Staple Double- Corner — — 2in1 Staple 3 4 5 6 Double- Corner — — — 2in1 Staple Double- Hole — — 2in1 Punch 3 4 5 6 2-Point Staple Di2510f/Di3510f 9-25...
Page 300 Staple Double- Corner — 2in1 Staple Double- Hole — — 2in1 Punch 2-Point Staple Double- Hole — 2in1 Punch 2-Point Staple Double- Corner — — — 4in1 Staple Double- Corner — — 4in1 Staple 9 10 11 12 9-26 Di2510f/Di3510f...
Page 301 Double- Corner — — 4in1 Staple 9 10 11 12 Double- Corner — 4in1 Staple 9 10 11 12 Double- Hole — 4in1 Punch 9 10 11 12 2-Point Staple Double- Hole — — 4in1 Punch 2-Point Staple Di2510f/Di3510f 9-27...
Page 302: Top-Bound Double-Sided Documents
Staple Single- Hole — Sided Punch 2-Point Staple Single- Hole — — Sided Punch 2-Point Staple Single- Corner — — — Sided Staple Single- Corner — — — Sided Staple Single- Hole — — Sided Punch 2-Point Staple 9-28 Di2510f/Di3510f...
Page 303 Corner — 2in1 Staple Single- Corner — — 2in1 Staple Single- Hole — 2in1 Punch 2-Point Staple Single- Hole — — 2in1 Punch 2-Point Staple Single- Corner — — — 2in1 Staple Single- Corner — — 2in1 Staple Di2510f/Di3510f 9-29...
Page 304 2in1 Punch 2-Point Staple Single- Corner — — 4in1 Staple Single- Corner — — 4in1 Staple Single- Hole — 4in1 Punch 2-Point Staple Single- Hole — — 4in1 Punch 2-Point Staple Single- Corner — — — 4in1 Staple 9-30 Di2510f/Di3510f...
Page 305 Top-Bound Double-Sided Document Ö Double-Sided Copy Desired Copy Copy Finishing Margin File Binding Setting Setting Setting Margin Position (Orig. Ö Setting Copy (Auxiliary Screen) Screen) Double- Corner — — Sided Staple Double- Corner — Sided Staple Double- Hole — Sided Punch 2-Point Staple Di2510f/Di3510f 9-31...
Page 306 Corner — — — Sided Staple Double- Hole — — 2in1 Punch 2-Point Staple Double- Hole — — — 2in1 Punch 2-Point Staple Double- Corner — 2in1 Staple 3 4 5 6 Double- Corner — — 2in1 Staple 9-32 Di2510f/Di3510f...
Page 307 Punch 2-Point Staple Double- Corner — — — 2in1 Staple Double- Corner — — 2in1 Staple Double- Hole — — — 2in1 Punch 2-Point Staple Double- Hole — — 2in1 Punch 2-Point Staple Double- Corner — 4in1 Staple Di2510f/Di3510f 9-33...
Page 308 4in1 Staple 9 10 11 12 Double- Corner — — — 4in1 Staple 9 10 11 12 Double- Hole — — 4in1 Punch 9 10 11 12 2-Point Staple Double- Hole — — — 4in1 Punch 2-Point Staple 9-34 Di2510f/Di3510f...
Page 309: Large Documents
Original Direction setting from the Orig. > Copy screen, page 10-23. When making A3 L or B4 L copies, the “2-Point Staple” and “Hole Punch” settings are not available with the following positions. Di2510f/Di3510f 9-35...
Page 310 Original Documents 9-36 Di2510f/Di3510f...
Page 311: Specifying Copy Settings
Non-Sort The copies are fed out and stacked on top of each other as they are printed. Sort The copies are automatically divided into the specified number of sets with each set containing a copy of each page. Di2510f/Di3510f 10-1...
Page 312 Only when the finisher is installed 2-Point Staple Copies printed with the “Sort” or “Group” setting are automatically stapled together at two points on the left edge. Note Thick paper, envelopes and overhead projector transparencies cannot be stapled. 10-2 Di2510f/Di3510f...
Page 313 The default setting is “Non-Sort”. The default setting can be changed using a function on the User’s Choice screen. For details, refer to “Changing Default Settings” on page 7-6. Di2510f/Di3510f 10-3...
Page 314: Notes On Using The "Sort" And "Group" Settings
The “Mixed Orig Detection” function must not be selected. None of the following can be selected: "Page Insertion" and "Cover Mode" function. A paper drawer cannot be selected. If a finisher is installed, crisscross sorting can not be carried out. 10-4 Di2510f/Di3510f...
Page 315: Shift Sorting
Crisscross Sorting Each copy set is fed out in an alternating crisscross pattern. Shift Grouping Each page set is fed out shifted to alternating sides. Crisscross Grouping Each page set is fed out in an alternating crisscross pattern. Di2510f/Di3510f 10-5...
Page 316: To Make Copies Using A Stapling Setting
If “Corner Staple” was selected, skip to step 6. If “2-Point Staple” was selected, continue with step 4. Touch [SELECT POSITION]. Touch the button for the desired stapling position. Touch [ENTER]. Press the [START] key. The copies are printed. 10-6 Di2510f/Di3510f...
Page 317 For details, refer to chapter “6 Fax Operations”. When copying while using a stapling setting, be sure that the maximum number of pages that can be stapled together is not exceeded. Where you do not set the position, the stapling position is automatically specified. Di2510f/Di3510f 10-7...
Page 318: To Make Copies Using The "Hole Punch" Setting
If copying is started without the hole punch position specified or if "OFF" was selected, the hole punch position is automatically specified according to the document orientation, as shown below. To adjust the position of the punched holes, contact your service representative. 10-8 Di2510f/Di3510f...
Page 319: Creasing And Folding
The copies are printed. Note Creased and 2-point staple can be applied to A3, B4, A4, and B5 sized paper. 2 to 15 sheets of paper can be stabled. Only plain and recycled paper can be creased or 2-point stapled. Di2510f/Di3510f 10-9...
Page 320: Notes On The Staple Position
Document size: A4 L Paper size: A4 C Document size: A4 L Document size: A4 L Paper size: A4 L Document size: A3 L, Document size: A3 L, Paper size: A3 L, B4 L B4 L B4 L 10-10 Di2510f/Di3510f...
Page 321 Document size: A4 L Paper size: A4 C Document size: A4 L Document size: A4 L Paper size: A4 L Document size: A3 L, Document size: A3 L, Paper size: A3 L, B4 L B4 L B4 L Di2510f/Di3510f 10-11...
Page 322: Notes On The Number Of Possible Stapled Sets
100 sets 3 to 5 sheets 80 sets 6 to 10 sheets 60 sets 11 to 20 sheets 40 sets 21 to 30 sheets 33 sets 31 to 40 sheets 25 sets 41 to 50 sheets 20 sets 10-12 Di2510f/Di3510f...
Page 323: Notes On The Hole Punch Position
When copying with the "Hole Punch" setting selected, be careful of the orientation of the document. When the finisher and punch kit are installed Screen Document Orientation Icon Feeding From the Duplexing Scanning From the Original Document Feeder Glass Di2510f/Di3510f 10-13...
Page 324: Specifying A Zoom Setting
Selecting the “Minimal” setting ensures that any part of the original positioned at the edge of the page will not be cut off in the copy. The zoom ratio of the “Minimal” setting can be changed to any ratio between 0.900 and 0.999. 10-14 Di2510f/Di3510f...
Page 325: To Select A Zoom Setting
The copy size can be changed by specifying different scaling proportions (between 0.250 and 4.000) for the vertical and the horizontal dimensions. To select a Zoom setting Press the [COPY] key. Touch [ZOOM]. A screen appears, showing the available Zoom settings. Select the desired Zoom setting. Di2510f/Di3510f 10-15...
Page 326: To Enter A Custom Zoom Ratio
A screen appears, showing the available Zoom settings. Touch [CustomZoom]. Use the keypad to type in the desired zoom ratio (between 0.250 and 4.000). Touch [Enter]. The entered zoom ratio is displayed and is specified as the custom Zoom setting. 10-16 Di2510f/Di3510f...
Page 327: To Store Customzoom And Minimal Zoom Ratios
(between 0.250 and 4.000). To store a Minimal zoom ratio, type in the desired zoom ratio between 0.900 and 0.999. The entered zoom ratio is displayed. Touch [1], [2] or [MINIMAL]. Touch [ENTER]. The entered zoom ratio is stored. Di2510f/Di3510f 10-17...
Page 328: To Recall A Stored Custom Zoom Ratio
Specifying Copy Settings To recall a stored custom zoom ratio Press the [COPY] key. Touch [ZOOM]. A screen appears, showing the available Zoom settings. Touch [CUSTOMZOOM]. Touch [1], [2] or [MINIMAL]. Touch [ENTER] The entered zoom ratio is recalled. 10-18 Di2510f/Di3510f...
Page 329: To Specify Different Vertical And Horizontal Scaling Proportions ("X/Y Zoom" Setting)
Use the keypad to type in the desired length of side X (between 0.250 and 4.000). Use the keypad to type in the desired length of side Y (between 0.250 and 4.000). Touch [ENTER]. The entered zoom ratio is applied. Di2510f/Di3510f 10-19...
Page 330: Selecting The Orig. > Copy Settings
Double-Sided Ö Single-Sided (Only if the duplexing document feeder is installed) Two single-sided copies are produced from a double-sided document. Double-Sided Ö Double-Sided (Only if the duplexing document feeder is installed) A double-sided copy is produced from a double-sided document. 10-20 Di2510f/Di3510f...
Page 331 A double-sided copy is produced from eight single-sided documents. Single-Sided Ö Booklet Creation A double-sided copy is produced from four single-sided documents. Double-Sided Ö Single-4in1 (Only if the duplexing document feeder is installed) A single-sided copy is produced from two double-sided documents. Di2510f/Di3510f 10-21...
Page 332 Book (Spreadsheet) Ö Single-Sided A single-sided copy is produced from a bound document. Book (Separation) Ö Double-Sided A double-sided copy is produced from a bound document. Book (Spreadsheet) Ö Double- Sided A double-sided copy is produced from a bound document. 10-22 Di2510f/Di3510f...
Page 333: To Specify Orig. > Copy Settings
Touch [ORIG. > COPY]. Select the setting for the type of document to be copied. (For the example at the right, touch [SINGLE-SIDED].) Select the setting for the desired type of copy. (For the example at the right, touch [DOUBLE-SIDED].) Di2510f/Di3510f 10-23...
Page 334 [ENTER]. Touch [ORIGINAL DIRECTION]. Select an Original Direction setting if the document is loaded in an orientation other than the standard. Select the appropriate document orientation setting. Touch [ENTER]. Press the [START] key. The copies are printed. 10-24 Di2510f/Di3510f...
Page 335: Copying A Bound Document
For details, refer to chapter “9 Original Documents”. Press the [COPY] key. Touch [ORIG. > COPY]. Touch [MARGIN]. Select the appropriate binding margin position. There are two locations for the binding position, as shown in the illustrations at the right. Di2510f/Di3510f 10-25...
Page 336 To adjust the width of the area erased from the bottom of the back side of the page, contact your service representative. Touch [ENTER]. Press the [START] key. The copies are printed. 10-26 Di2510f/Di3510f...
Page 337: Copying A Book
“RightBound”). Select whether to copy both pages of the book onto one sheet (“Spreadsheet”) or onto two separate sheets (“Separation”). To erase around the text or along the binding, touch [BOOK ERASE]. Select the desired Book Erase setting. Di2510f/Di3510f 10-27...
Page 338 12 mm. To change this default setting, consult your service representative. Touch [ENTER]. Select the desired copy settings. If you touch [Book], you can not select [Single-2in1] or [4in1/ Booklet]. Press the [START] key. The copies are printed. 10-28 Di2510f/Di3510f...
Page 339: Copying Book Pages Onto Separate Double-Sided Pages
Select the appropriate setting for the binding position of the book (“Standard Book” or “RightBound”). Touch [SEPARATION], and then touch [ENTER]. Touch [DOUBLE-SIDED]. Touch [PAGE ORDER]. Select the setting for the desired page order, and then touch [ENTER]. Book page order Di2510f/Di3510f 10-29...
Page 340 Specifying Copy Settings Both the left and the right sides are double-sided. Press the [START] key. The copies are printed. 10-30 Di2510f/Di3510f...
Page 341: Quickly Selecting Default Settings
“Single-Sided > Double-Sided” or “Double-Sided > Double-Sided”. The default settings can be changed using the various functions on the User’s Choice screen. For details, refer to “Changing Default Settings” on page 7-6. Di2510f/Di3510f 10-31...
Page 342: Specifying A Copy Density
“Auto” Density: The density is automatically adjusted for the document. Position the document(s) to be copied. For details, refer to chapter “9 Original Documents”. Press the [COPY] key. Touch [DENSITY]. Touch [TEXT]. Touch [AUTO], or touch [LIGHTER] and [DARKER] to select the desired Density setting. 10-32 Di2510f/Di3510f...
Page 343: Selecting The "Photo" Setting
Press the [COPY] key. Touch [DENSITY]. Touch [PHOTO]. Touch [LIGHTER] and [DARKER] to select the desired Density setting. Note The “Auto” Density setting cannot be selected if the “Photo” setting is selected. Selecting the “Auto” setting automatically selects the “Text” setting. Di2510f/Di3510f 10-33...
Page 344: Selecting The "Text/Photo" Setting
If the “Auto” Density setting is selected, the density of the copy is adjusted as necessary. However, the density can be made lighter or darker using a function on the User’s Choice screen. For details, refer to “Changing Default Settings” on page 7-6. 10-34 Di2510f/Di3510f...
Page 345: Configuring The Utilities And Fax
Registering an index allows you to group one-touch keys. Up to 15 recipients can be registered to each index key. How to Register Indexes Press the [UTILITY] key. After touching [USER SET], touch [FAX INPUT]. Touch [INDEX]. Select the index key to be registered. Di2510f/Di3510f 11-1...
Page 346 Configuring the Utilities and Fax Enter the name tor the index, and touch [ENTER]. See “Character Input and Registration” on page 11-27 for instructions on character input. Up to 12 characters may be input. 11-2 Di2510f/Di3510f...
Page 347: Changing Index Names
Perform steps 1 to 4 in “How to Register Indexes” on page 11-1. Select the index key to be changed. Use the left and right arrow keys to the characters you want to change and touch [DEL.]. Enter the new index name. Touch [ENTER]. Di2510f/Di3510f 11-3...
Page 348: Deleting Index Names
Perform steps 1 to 4 in “How to Register Indexes” on page 11-1. Select the index key to be deleted. Use the [C] key to delete the index name. Touch [ENTER]. Note When an index is deleted, the one- touch keys registered in that index are not deleted. 11-4 Di2510f/Di3510f...
Page 349: One-Touch Dial Number Registration
Type in the F code (SEP). F-CODE (SID/PWD) Type in the F code (SID/PWD). One-Touch One-Touch Copy The selected one-touch key can be copied. How to Register One-Touch Keys Press the [UTILITY] key. After touching [USER SET], touch [FAX INPUT]. Touch [ONE-TOUCH]. Di2510f/Di3510f 11-5...
Page 350 Up to 12 characters may be input. Touch [G3], and then touch [NEXT]. Enter the recipient’s telephone name with the keypad, and touch [NEXT]. Touch [PAUSE] to allow a wait time of about 3 seconds. 11-6 Di2510f/Di3510f...
Page 351 Configuring the Utilities and Fax After verifying the entered information, touch [ENTER]. Di2510f/Di3510f 11-7...
Page 352: Registering Overseas Recipients
Configuring the Utilities and Fax Registering Overseas Recipients Perform steps 1 to 7 in “How to Register One-Touch Keys” on page 11-5. Enter the recipient's telephone number with the keypad, and touch [OVERSEAS]. Touch [NEXT]. After verifying the registration information, touch [ENTER]. 11-8 Di2510f/Di3510f...
Page 353: Registering F-Codes
Refer to “User Manual: FAX Operation, Using the Document Function, Concerning F-CODEs” for details on F-CODEs. Enter the F-CODE with the keypad, and touch [ENTER]. Touch [ENTER], and then [NEXT] in the next screen. After verifying the registration information, touch [ENTER]. Di2510f/Di3510f 11-9...
Page 354: Setting The Communication Speed
Perform steps 1 to 3 “How to Register One-Touch Keys” on page 11-5. Press the one-touch key you want to change or delete. Select the key for the item you want to change and change the information. To delete, touch [DELETE]. After verifying the registration information, touch [ENTER]. 11-10 Di2510f/Di3510f...
Page 355: How To Copy One-Touch Keys
Touch Keys” on page 11-5, and then select the One-Touch Key to be copied. Select the one-touch key to be copied from the One-Touch screen, and touch [ONE-TOUCH COPY]. Press the key you want to copy to. After verifying the copy operation, touch [ENTER]. Di2510f/Di3510f 11-11...
Page 356: Fax Program Registration
A total of 540 FAX and one-touch keys can also be registered. In order to specify a recipient for a FAX program, the recipient must have been registered as a one-touch key in advance. (For details, refer to “One-Touch Dial Number Registration” on page 11-5. 11-12 Di2510f/Di3510f...
Page 357: Registering Transmission Programs
Press the [UTILITY] key. After touching [USER SET], touch [FAX INPUT]. Touch [FAX PROGRAM]. Select the fax program key you want to register. Touch the arrow keys, an index key or [INDEX LIST] to select an unregistered one-touch key. Di2510f/Di3510f 11-13...
Page 358 [ENTER]. To register a sequential data transmission, designate all transmission destinations. Up to a maximum of 300 destinations can be specified. If the desired destination is not registered, touch [NO DEST.]. Touch [NEXT]. Touch [TRANSMISSION SETTING]. 11-14 Di2510f/Di3510f...
Page 359 Only one destination can be designated with real-time transmission. If more are designated, real-time transmission will be cancelled. This is also true for Priority TX (prioritized transmission). The zoom is set to auto for 2 in 1 transmission. Di2510f/Di3510f 11-15...
Page 360: How To Register Post Programs
(Use 24-hour notation (military time) to enter the hour.) Touch [MINUTE], and enter using the keypad. Touch [EVERY HOURS], and enter using the keypad. (Specify how often to transmit using an interval from 01 to 24.) Touch [NEXT]. 11-16 Di2510f/Di3510f...
Page 361 - TSI - Dest. Insert - TX Report - 2 in 1 - 2-Sided TX - Rotation TX - TX Marker - Password TX After selecting all the desired functions, touch [ENTER]. After verifying the entered information, touch [ENTER]. Di2510f/Di3510f 11-17...
Page 362: How To Register Polling Reception Programs
Designate the destination. To use a one-touch key, press the [ONE-TOUCH] key for the destination, and then touch [ENTER]. To using a name search, touch [SEARCH], specify the destination, and then touch [ENTER]. Touch [NEXT]. Touch [TIMER SET]. 11-18 Di2510f/Di3510f...
Page 363 Touch [HOUR], and enter using the keypad. (Use 24-hour notation (military time) to enter the hour.) Touch [MINUTE], and enter using the keypad. Touch [NO SETTING] when not designating a time. Touch [ENTER]. After verifying the entered information, touch [ENTER]. Di2510f/Di3510f 11-19...
Page 364: How To Change Or Delete A Fax Program
Select the key for the item you want to change and change the information. Touch [DELETE] to delete the program. Touch [ENTER]. Note If the program type is changed, the registered contents of the program are deleted. When [DELETE] is touched, a confirmation screen displays. Touch [YES] to delete. 11-20 Di2510f/Di3510f...
Page 365: Setting Up Bulletin Boards
This sets whether a password is required to read text on Check a bulletin board. The initial value is [NO]. For details on using the bulletin boards, refer to “Using the Document Functions” on page 6-64. Press the [UTILITY] key. After touching [USER SET], touch [FAX INPUT]. Di2510f/Di3510f 11-21...
Page 366 Touch [Bultn. Board]. Select the desired bulletin board number. Touch the key for the bulletin board you want to register. Set the information you want to register. To register an F code: Enter with the keypad, and touch [ENTER]. 11-22 Di2510f/Di3510f...
Page 367 [C] key and re-input. When [DELETE] is touched, the character on the cursor is deleted. When [CANCEL] is touched, the screen returns to the state before registration began. The [REMOTE OUTPUT CHECK] is set the same way. Di2510f/Di3510f 11-23...
Page 368: Registering Confidential Boxes
Up to 20 characters may be entered consisting of 0 to 9, # and . Remote Input This sets whether a password is required to receive Check documents in the confidential box. The initial value is [NO]. Press the [UTILITY] key. Touch [USER SET], and then touch [USER’S CHOICE]. 11-24 Di2510f/Di3510f...
Page 369 Touch the key for the box you want to register. Set the information you want to register. To register a box name: Enter the box name, and touch [ENTER]. See “Character Input and Registration” on page 11-27 for instructions on character input. Di2510f/Di3510f 11-25...
Page 370 [C] key and re- input. When [DELETE] is touched, the character on the cursor is deleted. When [CANCEL] is touched, the screen returns to the state before registration began. To continue registering confidential boxes, repeat steps 4 to 7. 11-26 Di2510f/Di3510f...
Page 371: Character Input And Registration
These keys move the cursor to the left and right within the character display area. Delete key This deletes the character at the cursor position. Input mode key Displays the current input mode. Press this key to select a different character input mode. Di2510f/Di3510f 11-27...
Page 372: Inputting Alphanumerics
[DEL.], and enter the correct characters. To switch between capital and small letters, touch [CAPS]. When the [CAPS] key is ON, it is displayed as reversed video (white letters on a black background). 11-28 Di2510f/Di3510f...
Page 373: Inputting Symbols
Double check to make sure the characters displayed in the character display area are correct. To correct inputted characters, move the cursor to the desired position with the arrow keys, delete using the [DEL.], and enter the correct characters. Di2510f/Di3510f 11-29...
Page 374: How To Use Reports And Lists
Settings Lists* Outputs details of the settings for different functions. Forwarding List* Outputs the conditions for forwarding. * This can be confirmed by outputting an administrator report. However, this can only be carried out by an administrator. 11-30 Di2510f/Di3510f...
Page 375: Confirming Transmission Details
How to Output Transmission Activity Reports Press the [UTILITY] key. Touch [REPORTS]. Touch [TX ACT. REPORT]. The TX Activity Report is printed out. Di2510f/Di3510f 11-31...
Page 376 The destination is unable to receive. The destination does not answer the telephone. INTERR Communications are suspended. F.MEM The memory is full. Communications with all destinations were unsuccessful. PT.DEL Some communications were unsuccessful. IMG NG Communication quality of image is coarse. 11-32 Di2510f/Di3510f...
Page 377: Confirming Receiving Details
How to Output Receiving Activity Reports Press the [UTILITY] key. Touch [REPORTS]. Touch [RX ACT. REPORT]. The RX Activity Report is printed out. Di2510f/Di3510f 11-33...
Page 378 The destination is unable to receive. The destination does not answer the telephone. INTERR Communications are suspended. F.MEM The memory is full. Communications with all destinations were unsuccessful. B.PRT Under printing. IMG NG Communication quality of image is coarse. 11-34 Di2510f/Di3510f...
Page 379: Confirming The Information Registered To One-Touch Dial Keys
11.10 Confirming the Information Registered to One- Touch Dial Keys The destinations registered to one-touch dial keys can be outputted for verification. How to Output One-Touch Lists Press the [UTILITY] key. Touch [REPORTS]. Touch [ONE-TOUCH LIST]. The One-Touch List is printed out. List Details Di2510f/Di3510f 11-35...
Page 380: Confirming The Contents Registered To Fax Programs
(FAX programs) is output in a list for verification. How to Output FAX Program Lists Press the [UTILITY] key. Touch [REPORTS]. Touch [FAX PROGRAM LIST]. Select the FAX program key you want to print out. The FAX Program List is printed out. 11-36 Di2510f/Di3510f...
Page 381 Configuring the Utilities and Fax List Details Di2510f/Di3510f 11-37...
Page 382: 11.12 Confirming Text Registered To Bulletin Boards
11.12 Confirming Text Registered to Bulletin Boards Text registered to the bulletin boards can be outputted for verification. How to Output the Bulletin Board List Press the [UTILITY] key. Touch [REPORTS]. Touch [BULLETIN BOARD LIST]. The Bulletin Board List is printed out. List Details 11-38 Di2510f/Di3510f...
Page 383: Confirming The Contents Registered To Confidential Boxes
11.13 Confirming the Contents Registered to Confidential Boxes Outputs the contents registered to the confidential boxes in a list. How to Output the Confidential List Press the [UTILITY] key. Touch [REPORTS]. Touch [CONFIDENTIAL LIST]. The Confidential List is printed out. List Details Di2510f/Di3510f 11-39...
Page 384: 11.14 Checking Account Information
MANAGEMENT 1], and then touch [REP. PRINT]. Touch either [ACCOUNT LIST]. Touch [ENTER]. The account list is printed. Note If the “Copy Track Mode” parameter on the “Copy Track” screen is set to “No”, only [Setting List] and [FORWARD LIST] will appear. 11-40 Di2510f/Di3510f...
Page 385 Configuring the Utilities and Fax List Details Di2510f/Di3510f 11-41...
Page 386: 11.15 Confirming The Settings Of Various Functions
Only an administrator can output the Settings List. How to Output the Setting List Press the [UTILITY] key. Touch [ADMINISTRATOR MANAGEMENT] and input the password. Touch [ADMINISTRATOR MANAGEMENT 1], and then touch [REP. PRINT]. Touch [SETTING LIST]. The Setting List is printed out. 11-42 Di2510f/Di3510f...
Page 387 Configuring the Utilities and Fax List Details Di2510f/Di3510f 11-43...
Page 388: 11.16 Confirming The Conditions For Forwarding
Only an administrator can output the Forwarding List. How to Output the Forwarding List Press the [UTILITY] key. Touch [ADMINISTRATOR MANAGEMENT] and input the password. Touch [ADMINISTRATOR MANAGEMENT 1], and then touch [REP. PRINT]. Touch [FORWARD LIST]. The Forwarding List is printed out. 11-44 Di2510f/Di3510f...
Page 389 Configuring the Utilities and Fax List Details Di2510f/Di3510f 11-45...
Page 390 Configuring the Utilities and Fax 11-46 Di2510f/Di3510f...
Page 391: Administrator Management Operations
Press the [UTILITY] key. Touch [ADMIN. MANAGEMENT]. In the Administrator Code screen, use the keypad to type in the administrator access code, and then touch [ENTER]. If no administrator access code is programmed, touch [ENTER] to display the Administrator Management screen. Di2510f/Di3510f 12-1...
Page 392 Note When specifying [1000 Accounts] or [OFF] in the account management mode, neither the [Account Reg] nor the [Account Counter] keys will be displayed. Refer to “Account Management Operations” on page 12-9. 12-2 Di2510f/Di3510f...
Page 393: Specifying The Date And Time
[C] (clear) key. Touch the button for the year, month, day, hour or minutes, and then use the keypad to enter the value. Enter four digits for the year. Enter the time in the 24-hour format. Di2510f/Di3510f 12-3...
Page 394 Administrator Management Operations Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 12-4 Di2510f/Di3510f...
Page 395: To Set The Time Zone
Touch the arrow keys to adjust the setting, and then touch [ENTER]. The time difference can be adjusted in 30-minute intervals. Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 12-5...
Page 396: Specifying Administrator Settings
[DELETE]. Press the [C] (clear) key to erase the entered text. To return to the previous screen, touch [CANCEL]. Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 12-6 Di2510f/Di3510f...
Page 397: To Specify A Limit On Copies That Can Be Printed ("Max. Copy Sets" Parameter)
Use the keypad to specify the maximum number of copies, and then touch [ENTER]. A number between 1 and 99 can be specified. Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 12-7...
Page 398: To Disable The Sleep Function ("Disable Sleep Mode" Parameter)12-8
Mode Setting” function, which is available from the User’s Choice screen. On the User’s Choice [3/6] sleep mode setting screen, select [NO]. Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 12-8 Di2510f/Di3510f...
Page 399: Account Management Operations
Total counter: displays the total counter value for each account. Additionally, clears the counter value [1000 ACCOUNTS] Enter the account number to make copies. Additionally, the following can be configured per account. Total counter: displays the total counter value for each account. Additionally, clears the counter value Di2510f/Di3510f 12-9...
Page 400: To Set The Account Management Mode
[EXIT] to return to the Basics screen. Note When programming or changing account information data, please set the default account information data. However, depending on the currently specified account information method, the default screen may not be displayed. 12-10 Di2510f/Di3510f...
Page 401 When setting [100 ACCOUNTS 1] or [100 ACCOUNTS 2], please program account names, etc. for each account. Note Only when setting [100 ACCOUNTS 1] or [100 ACCOUNTS 2], will the [ACCOUNT REG] or the [ACCOUNT COUNTER] be displayed on the Admin.1 screen. Di2510f/Di3510f 12-11...
Page 402: To Print Account Information ("Copy Track Data" Parameter)
Set A4 L paper in the 1st paper drawer, then press the [START] key. The data for all registered accounts is printed. Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 12-12 Di2510f/Di3510f...
Page 403: To Clear All Counters
[INTERRUPT] key. If you wish to clear the total counter of other accounts, repeat steps 4 and 5. Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. Di2510f/Di3510f 12-13...
Page 404: To Change Account Information
[C] key. Use the keypad to type in the value you wish to change. Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 12-14 Di2510f/Di3510f...
Page 405: Setting Account Registration
12-10. To register accounts Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1], and then touch [ACCOUNT REG]. Select the account key to program or change. Touch [ACCOUNT NAME]. Di2510f/Di3510f 12-15...
Page 406 Touch [ENTER]. Touch [MAX. PRINT PAGE], and enter the upper print limit using the keypad. Touch [ENTER]. Continue touching [ENTER] to return to the Utility screen, and then touch [EXIT] to return to the Basics screen. 12-16 Di2510f/Di3510f...
Page 407 Administrator Management Operations Where you wish to change the programmed details, repeat from step 3, entering the correct details. To delete programmed details, at step 4, press the [Delete] key. Di2510f/Di3510f 12-17...
Page 408: To Check The Number Of Prints Made By Each Account
Setting the Language for the TSI Name and Reports Sets the language (English or other language) used for the TSI name and for reports. How to Set the Communication Language Follow the procedure described in “To display the Administrator Management screens” on page 12-1. 12-18 Di2510f/Di3510f...
Page 409 Touch [ADMIN. 1] key, and then touch [Initial Settings]. Touch [LANGUAGE (COM.)]. Select [ENGLISH] or other language, and touch [ENTER]. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. Di2510f/Di3510f 12-19...
Page 410: Registering Telephone Numbers
The destination may look at the FAX telephone number in reports or the like. We recommend you include the area code for easy recognition by the destination. The FAX telephone number can be changed using the same procedure as used for registration. 12-20 Di2510f/Di3510f...
Page 411: How To Set Up The Fax Telephone Number Information
[INITIAL SETTINGS]. Touch [SELF-TELEPHONE # INFORMATION]. If you are using the multi-port option, two general subscriber lines are possible. Select [SELF- TELEPHONE # INFORMATION 1] and [SELF-TELEPHONE # INFORMATION 2] and set the information for each. Touch [SELF-TELEPHONE #]. Di2510f/Di3510f 12-21...
Page 412 Internal (Extension): Select when connected to a general subscriber phone line through a PBX. If you select [EXTENSION], input the external access number (the number used to get out), and touch [ENTER]. Touch [ENTER]. 12-22 Di2510f/Di3510f...
Page 413 10 pps line. PB: Select if using a push button line. Touch [ENTER]. After verifying the entered information, touch [ENTER]. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. Di2510f/Di3510f 12-23...
Page 414: Registering Tsi Names
The TSI name can be changed using the same procedure as used for registration. How to Register and Change TSI Names Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1] , and then touch [INITIAL SETTINGS]. Touch [TSI REGISTRATION]. 12-24 Di2510f/Di3510f...
Page 415 See “Character Input and Registration” on page 11-27 for instructions on character input. After verifying the registration information, touch [ENTER]. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. Di2510f/Di3510f 12-25...
Page 416: Registering The Fax Id Displayed At The Destination
ID information. In that case, the FAX telephone number that you registered will be displayed. How to Register and Change the FAX ID Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1], and then touch [INITIAL SETTINGS]. Touch [SELF-ID]. 12-26 Di2510f/Di3510f...
Page 417 Enter the ID and touch [ENTER]. See “Character Input and Registration” on page 11-27 for instructions on character input. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. Di2510f/Di3510f 12-27...
Page 418: 12.10 Transmission Settings
Rotation Sets whether to return to rotation transmission transmission or not after each operation. The default value from the factory is “ON”. Two-sided Sets the margin for two-sided transmissions. transmission The default value from the factory is “No”. 12-28 Di2510f/Di3510f...
Page 419: Specifying Default Values For Quality And Mode When Transmitting
Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1], and then touch [TX SETTINGS]. Touch [QUALITY/MODE]. To set the default quality: Touch [PRIORITY QUALITY]. Select the default quality value, and touch [ENTER]. Di2510f/Di3510f 12-29...
Page 420 Select the default density value, and touch [ENTER]. To set the communication mode (optional): Touch [COMMUNICATION MODE]. Touch [G3], and then touch [ENTER]. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. 12-30 Di2510f/Di3510f...
Page 421: Specifying The Default Transmission Settings
Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1], and then touch [TX SETTINGS]. Touch [COM. MENU]. To set the default transmission method: Touch [TX]. Select the default transmission mode setting, and touch [ENTER]. Di2510f/Di3510f 12-31...
Page 422 Administrator Management Operations To set the default TSI position: Touch [TSI]. Touch [TSI POSITION]. Select the default value for the position of the TSI name on transmitted originals, and touch [ENTER]. 12-32 Di2510f/Di3510f...
Page 423 Administrator Management Operations To set the default TSI selection: Touch [TSI]. Touch [TSI SELECTION]. Select the default TSI name, and touch [ENTER]. Di2510f/Di3510f 12-33...
Page 424 To set the two-sided transmission default: Touch [2-SIDED TX] key. Select the default margin for two-sided transmissions, and touch [ENTER] key. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. 12-34 Di2510f/Di3510f...
Page 425: 12.11 Setting Memory Lock For Received Documents
Setting Memory Lock and Batch Printing for Received Documents Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1] key, and then touch [RX SETTINGS]. Di2510f/Di3510f 12-35...
Page 426 Touch [MEMORY LOCK ON/OFF] key. Select the days of the week to set the time to. Be sure to select the days of the week. Touch [START TIME] key, and enter the hour to start printing using the keypad. 12-36 Di2510f/Di3510f...
Page 427 (four digits) with the keypad. To correct the password, press the [C] (clear) key and re-enter. When [CANCEL] is touched, the screen returns to the state before registration began. Touch [ENTER]. Touch [ENTER] until you return to the main screen. Di2510f/Di3510f 12-37...
Page 428: Manually Printing Received Faxes With Memory Lock
[ENTER]. To stop the printing after it has started, touch [LOCK ON]. Touch [TEMP. PRINT] is start printing again. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. 12-38 Di2510f/Di3510f...
Page 429: Setting The Receiving Mode And No. Of Receiving Call Rings
The default is “1” ring. How to Set the Receiving Functions Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1], and then touch [FAX SETTING]. Touch [RX FUNCTIONS]. Di2510f/Di3510f 12-39...
Page 430 The number of rings may be set between 1 and 20. After verifying the entered information, touch [ENTER] key. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. 12-40 Di2510f/Di3510f...
Page 431: Password Registration For Password Communication
The initial setting from the factory is No“ Password Communication (Communication Password "00")”. How to Register the Communication Password Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1], and then touch [FAX SETTING]. Touch [PASSWORD COM.]. Di2510f/Di3510f 12-41...
Page 432 When [CANCEL] is touched, the screen returns to the state before registration began. After verifying the entered information, touch [ENTER]. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. 12-42 Di2510f/Di3510f...
Page 433: 12.14 Setting Document Management For Rx
Received documents are saved to a box without printing. The initial setting is Print for all types of documents. Regardless of the setting, all documents are printed for remote copy receiving. The order of the document management settings is “F-CODE”, “RX Port” and “Public Documents”. Di2510f/Di3510f 12-43...
Page 434: Document Management With F-Code
Management screens” on page 12-1. Touch [ADMIN. 1], and then touch [DOC MANAGE.]. Touch [F-CODE]. Touch the key you want to register. Touch [F-CODE]. The [DELETE] key can be touched to erase all the settings for the selected F-CODE. 12-44 Di2510f/Di3510f...
Page 435 To correct a number, either use the arrow keys to move the cursor and input, or touch [CANCEL] and re-input. Touching [Delete], deletes the character at the cursor point. Touching [CANCEL] returns the screen to the state before registration began. Di2510f/Di3510f 12-45...
Page 436 Select either [ON] or [OFF] for remote input check, and touch [ENTER]. Touch [ENTER]. Touch [RX DOC. SETTINGS]. Select how received documents are handled. Print: Select to print documents immediately. The [PRINT] displays in reverse video (white characters on a black background). 12-46 Di2510f/Di3510f...
Page 437 When adding a recipient by touching [Add Dest.], the recipient must first have been registered as a one-touch key. For details, refer to “One-Touch Dial Number Registration” on page 11-5. A maximum of 300 forwarding recipients can be registered. Di2510f/Di3510f 12-47...
Page 438: Document Management By Port
Touch [RX DOC. SETTINGS]. When [YES] is selected, the settings for each port are used.The method for handling a document and the forwarding recipient can be changed. When [NO] is selected, the settings for each port are ignored. 12-48 Di2510f/Di3510f...
Page 439 When adding a recipient by touching [Add Dest.], the recipient must first have been registered as a one-touch key. For details, refer to “One-Touch Dial Number Registration” on page 11-5. A maximum of 300 forwarding recipients can be registered. Di2510f/Di3510f 12-49...
Page 440: Document Management For Public Documents
Touch [ADMIN. 1], and then touch [DOC MANAGE.]. Touch [PUBLIC DOCUMENT]. Touch [RX DOC. SETTINGS]. Select how received documents are handled. Print: Select to print documents immediately. The [PRINT] displays in reverse video (white characters on a black background). 12-50 Di2510f/Di3510f...
Page 441 For details, refer to “One-Touch Dial Number Registration” on page 11-5. A maximum of 300 forwarding recipients can be registered. To display the documents save on the box, refer to “Using the Document Functions” on page 6-64. Di2510f/Di3510f 12-51...
Page 442: 12.15 Report Output
Touch [ADMIN. 1], and then touch [REP. PRINT]. Touch key for the list you want to output. The list is printed out. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. 12-52 Di2510f/Di3510f...
Page 443: 12.16 Settings For Report Output
Whether to automatically print the activity report every 50 communications. How to Set up the TX Report Follow the procedure described in “To display the Administrator Management screens” on page 12-1. Touch [ADMIN. 1], and then touch [REPORT SETTINGS]. Touch [TX REPORT]. Di2510f/Di3510f 12-53...
Page 444 TX report only when there is a failure. OFF: Select this so TX reports are not automatically printed out. After verifying the entered information, touch [ENTER]. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. 12-54 Di2510f/Di3510f...
Page 445: How To Set Up Activity Reports
Select either [ON] or [OFF] for automatic TX reports, and touch [ENTER]. After verifying the entered information, touch [ENTER]. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. Di2510f/Di3510f 12-55...
Page 446: Configuring Functions (Soft Switches)
(16-base) equivalents HEX specification Decimal Bit specification (binary) (hexadecimal) 0000 0000 0000 0001 0000 0010 0000 0011 0000 0100 0000 0101 0000 0110 0000 0111 0000 1000 0000 1001 0000 1010 0000 1011 0000 1100 0000 1101 0000 1110 12-56 Di2510f/Di3510f...
Page 447 Administrator Management Operations HEX specification Decimal Bit specification (binary) (hexadecimal) 0000 1111 0001 0000 1111 1111 Di2510f/Di3510f 12-57...
Page 448: How To Set Soft Switches
Use the keypad to enter a [0] or [1], and touch [ENTER]. For HEX specification: Touch [HEX SELECTION], use the keypad and the letters [A] to[F] to specify the bits, and touch [ENTER]. 12-58 Di2510f/Di3510f...
Page 449 Administrator Management Operations To change other modes, repeat steps 3 and 4. Touch [ENTER] until you return to the Utility screen, and then touch [EXIT] to return to the Basic screen. Di2510f/Di3510f 12-59...
Page 450: Specifications For Stamps And Password Look-Up (Mode 000)
Specifies whether to Do not look up look up or not to look Look up up a communication password for an RX 1, 0 * Do not change these bits. 12-60 Di2510f/Di3510f...
Page 451: Specifications For Destination Insertion On The Original (Mode 001)
The grayed out cells are the settings at the time of purchase. Details Setting Explanation 7, 6, 5, 4, 0001010 * Do not change these bits. 3, 2, 1 Specifies whether to Do not attach attach the destination Attach on the transmission original Di2510f/Di3510f 12-61...
Page 452: Specifying Memory Clear Report And Broadcast Tx Report Output (Mode 002)
* Do not change these bits. Specifies whether to Do not output output the memory Output clear report Specifies whether to Do not output output the sequential Output broadcast TX report 1, 0 * Do not change these bits. 12-62 Di2510f/Di3510f...
Page 453: Specifications For Transmission Receiving (Mode 003)
The grayed out cells are the settings at the time of purchase. Details Setting Explanation 7, 6, 5 * Do not change these bits. Transmission No transmission receiving receiving setting* Transmission receiving 3, 2, 1, 0 0011 * Do not change these bits. Di2510f/Di3510f 12-63...
Page 454: Specifying The Save Time For Failed Transmissions (Mode 004)
0010 20 minutes 0011 30 minutes 0100 40 minutes 0101 50 minutes 0110 60 minutes (1 hour) 0111 2 hours 1000 4 hours 1001 8 hours Other * Do not specify times other than those above. 12-64 Di2510f/Di3510f...
Page 455: Specifications For Receiving Long Originals (Mode 007)
90% of the original size. Specifies whether to Shrink shrink or truncate an Truncate incoming document that is too long to fit on the paper (available only when RX printing) * Do not change this bit. Di2510f/Di3510f 12-65...
Page 456: Specifications For Paper Selection When Rx Printing (Mode 008)
• When “Fit to Width” is set, paper that is wider is not selected • When “Same Width” is set, paper having the same width is selected 2, 1, 0 * Do not change these bits. 12-66 Di2510f/Di3510f...
Page 457: Specifications For Set-Up Confirmation Screen When Broadcasting (Mode 014)
Do not display the set-up display the set-up confirmation screen confirmation screen Display the set-up when broadcasting confirmation screen when broadcasting Always display the set-up confirmation screen regardless of whether broadcasting or not * Do not specify this setting. Di2510f/Di3510f 12-67...
Page 458: Specifying Settings Concerning Whether Or Not There Is A Connected Telephone Or A Received Date Report And Their Formats (Mode 016)
Specifies Attached whether or not a date report is attached. Received date in Fax Attached within the image mode. Specifies Attached outside of the whether the time image report is attached outside or inside of the image. 12-68 Di2510f/Di3510f...
Page 459: Specifications For The Failure Report Image (Mode 023)
The grayed out cells are the settings at the time of purchase. Details Setting Explanation 7, 6, 5, 4 1111 * Do not change these bits. Specifies whether to Do not attach attach the TX image to Attach failure reports 2, 1, 0 * Do not change these bits. Di2510f/Di3510f 12-69...
Page 460: Specifications For Incoming Fax Functions (Mode 030)
Rotate (sorted) * Do not change these settings. Specifies whether to No 2 in 1 do 2 in 1 recording for 2 in 1 okay incoming faxes. 3, 2, 1, 0 0000 * Do not change these bits. 12-70 Di2510f/Di3510f...
Page 461: Specifications For Cassette Selection With Incoming Faxes (Mode 037)
* Do not change this bit. Specifies whether to Disallow allow selection of the Allow manual feed tray when receiving a fax 1, 0 * Do not change these bits. * Available when the optional feed unit is mounted. Di2510f/Di3510f 12-71...
Page 462: Specifications For Set-Up Of Automatic Paper Feed After Copying (Mode 429)
* Do not change these bits. Specifies whether to Do not clear clear the contents of Clear the main screen after a copy is made where the automatic paper feed was used 4, 3, 2, 1, 00000 * Do not change these bits. 12-72 Di2510f/Di3510f...
Page 463: Touch Panel Messages
When the toner is nearly empty, the “Please add toner” message is displayed. After it is displayed, you can still print approximately 1000 pages, however please replace the bottle as soon as possible. For details, refer to “To replace the toner bottle” on page 13-2. Di2510f/Di3510f 13-1...
Page 464: When The Message "Please Add Toner." Appears
Follow the procedure described below to replace the toner bottle. To replace the toner bottle Open the front door. Pull the toner hopper out as far as possible. Flip up the toner bottle holder. 13-2 Di2510f/Di3510f...
Page 465 Since the toner within the bottle may have become compacted, be sure to break it up by performing this step. Shake the new toner bottle up and down about five times. With the seal on the toner bottle facing upward, insert the bottle. Di2510f/Di3510f 13-3...
Page 466 While toner is being refilled, do not turn off the machine or open any other doors. If the print is faint immediately after the toner bottle is replaced, replenish the toner. Refer to “To replenish the toner (“Toner Replenisher” function)” on page 7-42. 13-4 Di2510f/Di3510f...
Page 467: When The Message "Stapler Empty." Appears
Be sure to replace the staple cartridge only after the message appears. The machine may be damaged if the staple cartridge is removed before the message appears. To replace the staple cartridge for finisher Open the front door. Di2510f/Di3510f 13-5...
Page 468 Press in the area marked “PUSH” to unlock the staple holder. Remove the empty staple cartridge from the staple cartridge holder. Insert the new staple cartridge into the staple cartridge holder, and then carefully remove the stopper. 13-6 Di2510f/Di3510f...
Page 469 Touch Panel Messages Insert the refilled staple cartridge holder until it locks into place. Close the front door. Di2510f/Di3510f 13-7...
Page 470: To Replace The Staple Cartridge For The Saddle Kit
Be sure that the staple cartridge holder is inserted facing the correct direction. While holding up the paper output tray, remove the staple cartridge. Press in the area marked “PUSH” to unlock the staple holder. Remove the empty staple cartridge from the staple cartridge holder. 13-8 Di2510f/Di3510f...
Page 471 Touch Panel Messages Insert the new staple cartridge into the staple cartridge holder. Carefully remove the stopper. Insert the refilled staple cartridge holder until it locks into place. Lower the paper output tray. Open then shut the misfeed- clearing door. Di2510f/Di3510f 13-9...
Page 472: When A Paper Misfeed Occurs
A paper misfeed in the A paper misfeed in the multiple bypass tray mailbin kit (page 13-23) (page 13-17) A paper misfeed in the 1st A paper misfeed in the or 2nd paper drawer saddle kit (page 13-25) (page 13-18) 13-10 Di2510f/Di3510f...
Page 473: To Clear A Paper Misfeed In The Duplexing Document Feeder
Pull up the lever for the misfeed- clearing cover, and then open the cover. Carefully pull out any misfed documents. Swing up the document guide lever. Turn the dial to feed out any misfed documents. Di2510f/Di3510f 13-11...
Page 474 Touch Panel Messages While supporting the document feed tray with your right hand, carefully pull out any misfed paper. Return the document guide to its original position, and then close the misfeed-clearing cover. 13-12 Di2510f/Di3510f...
Page 475: To Clear A Paper Misfeed In The Fusing Section
CAUTION Decreased copy quality may result if the surface of the image transfer roller is touched. § Be careful not to touch the surface of the image transfer roller. Di2510f/Di3510f 13-13...
Page 476 Touch Panel Messages Pull up the right-side door release lever, and then open the right-side door. Carefully pull out any misfed paper. Open the fusing unit guide. Carefully pull out any misfed paper. 13-14 Di2510f/Di3510f...
Page 477 Carefully pull out any misfed paper in the fusing section. Carefully pull out any misfed paper around the image transfer roller. Carefully pull out any misfed paper. Close the right-side door. Di2510f/Di3510f 13-15...
Page 478 If the paper is misfed as described below, contact your service representative. The paper is wrapped around the image transfer roller. The paper is folded or shredded by the image transfer roller. The paper that was removed tore and partly remains in the fusing unit. 13-16 Di2510f/Di3510f...
Page 479: To Clear A Paper Misfeed In The Duplex Unit
Press down on the sliding plate with your left hand and carefully pull out any misfed paper. Return the multiple bypass tray to its original position. Di2510f/Di3510f 13-17...
Page 480: To Clear A Paper Misfeed In The 1St Or 2Nd Paper Drawer
Pull up the lower-right door release lever to open the lower-right door of the paper feed unit indicated in the touch panel message. Carefully pull out any misfed paper. Close the lower-right door. Close the multiple bypass tray. 13-18 Di2510f/Di3510f...
Page 481: To Clear A Paper Misfeed In The 3Rd Or 4Th Paper Drawer
To clear a paper misfeed in the 3rd or 4th paper drawer Pull up the lower-right door release lever to open the lower-right door of the paper feed unit indicated in the touch panel message. Carefully pull out any misfed paper. Close the lower-right door. Di2510f/Di3510f 13-19...
Page 482: To Clear A Paper Misfeed In The Large-Capacity Cabinet
To clear a paper misfeed in the large-capacity cabinet Pull up the lower-right door release lever to open the lower-right door of the paper feed unit indicated in the touch panel message. Carefully pull out any misfed paper. Close the lower-right door. 13-20 Di2510f/Di3510f...
Page 483: To Clear A Paper Misfeed In The Built In Finisher
Touch Panel Messages To clear a paper misfeed in the built in finisher Open the front door. Lower lever FN1, and then pull out any misfed paper. Turn knob FN2. Di2510f/Di3510f 13-21...
Page 484 If the punch kit is installed: Insert the punch box into its original position. Lower lever FN4. Turn dial FN5 or dial FN6, and then pull out any misfed paper. Return lever FN4 to its original position. Close the front door. 13-22 Di2510f/Di3510f...
Page 485: To Clear A Paper Misfeed In The Mailbin Kit
Touch Panel Messages To clear a paper misfeed in the mailbin kit Open the front door. Turn dial FN5 or dial FN6, and then pull out any misfed paper. While pressing down lever FN7, pull out any misfed paper. Di2510f/Di3510f 13-23...
Page 486 Touch Panel Messages Pull handle FN8 to open the misfeed-clearing door. Pull out any misfed paper in the mailbin kit. Close the misfeed-clearing door. Close the front door. 13-24 Di2510f/Di3510f...
Page 487: To Clear A Paper Misfeed In The Saddle Kit
Turn dial FN5 or dial FN6, and then pull out any misfed paper. Remove all paper from the paper output tray. Open the misfeed-clearing door, and then pull out any misfed paper. Close the misfeed-clearing door. Close the front door. Di2510f/Di3510f 13-25...
Page 488: When The Message "Cannot Staple." Appears
When the message “Cannot Staple.” appears, clear the jammed staples as described below. § If the following procedure is not followed and the paper is pulled out with too much force, the stapler unit may be damaged. Remove all paper from the finisher. 13-26 Di2510f/Di3510f...
Page 489 Touch Panel Messages Open the front door. Lower lever FN1, and then pull out any misfed paper. Turn dial FN2. If the punch kit is installed: Pull out the punch box. Di2510f/Di3510f 13-27...
Page 490 Insert the punch box into its original position. Lower lever FN4. Turn dial FN5 or dial FN6, and then pull out any misfed paper. Return lever FN4 to its original position. Turn the dial to the left to move the stapler toward the front. 13-28 Di2510f/Di3510f...
Page 491 Return the guide to its original position. Insert the staple cartridge holder until it locks into place. Close the front door. Note If stapling still cannot be performed, even after performing the above procedure, contact your service representative. Di2510f/Di3510f 13-29...
Page 492: When The Message "Hole Punch Collection Box In Full." Appears
Follow the procedure described below to empty the punch box. To empty the punch box Empty and re-install the punch box as described below. Open the front door. Pull out the punch box. 13-30 Di2510f/Di3510f...
Page 493 Touch Panel Messages Empty the punch box. Insert the punch box into its original position. Close the front door. Di2510f/Di3510f 13-31...
Page 494 Touch Panel Messages 13-32 Di2510f/Di3510f...
Page 495: Troubleshooting
Message “Stapler empty.” Appears” on page 13-5. The time to perform a Contact your service periodic inspection on representative. the machine has Touch to display the arrived. code. When contacting the service representative, inform them of the code. Di2510f/Di3510f 14-1...
Page 496 The total amount of jobs Ask the administrator to jobs to be printed has been to be printed as set by clear the number of jobs reached. Please contact the administrator has to be printed. the administrator. been reached. 14-2 Di2510f/Di3510f...
Page 497: When Incorrect Copies Are Printed
The toner is empty and Replace the toner the message “Please bottle with a new one. add toner.” appears in the touch panel. The paper is damp. Replace the paper. Di2510f/Di3510f 14-3...
Page 498 The printed output is blurry. The paper is damp. Replace the paper. The document was not Position the document pressed close enough so that it is pressed against the original closely against the glass. original glass. 14-4 Di2510f/Di3510f...
Page 499 A double-sided If a thin double-sided document is being document is being copied. copied, the information on the back side may be reproduced in the copy. Touch [Density], and then select a lighter density for the background. Di2510f/Di3510f 14-5...
Page 500 The printed page is curled. The paper that was Remove the paper from used (as with recycled the paper drawer, turn it paper) curls easily. over, and then load it again. Replace the paper with paper that is not damp. 14-6 Di2510f/Di3510f...
Page 501 Zoom setting was paper size. selected). Otherwise, set Zoom to “Auto Size” to reduce the copy to the selected paper size. * If the problem is not corrected even after the operations described above are performed, contact your service representative. Di2510f/Di3510f 14-7...
Page 502: When The Machine Is Not Operating Correctly
17 seconds to warm up being turned on. after it is turned on. Wait until the machine has finished warming up. The machine is Follow any messages malfunctioning. that appear on the touch panel. 14-8 Di2510f/Di3510f...
Page 503 Close the breaker for the electrical circuit has electrical circuit. been tripped. * If the problem is not corrected even after the operations described are performed, turn off the machine,unplug its power supply cord, and the contact your service representative. Di2510f/Di3510f 14-9...
Page 504: The Fax Does Not Work Properly
Is the reason on the Check the destination. destination side? (Paper empty, automatic reception disabled, power is OFF, etc.) Is the memory remaining After the document stored in low? memory has been sent and the memory remaining increased, send again. 14-10 Di2510f/Di3510f...
Page 505 Apparent Cause Countermeasures When the TX Is the stamp ink (Spare TX Replace the stamp ink Marker STAMP Marker STAMP 2) close to (Spare TX Marker STAMP UNIT 2 is faint. the end of its operational (optional) life? Di2510f/Di3510f 14-11...
Page 506: Reception Is Poor
There are black Is there any problem with Make a copy from the streaks on the the connection to the product. If there are no back received paper. receiving fax? streaks on the paper, transmit again to the destination. 14-12 Di2510f/Di3510f...
Page 507: Telephone Calls Are Difficult To Make
The telephone ring is too Is the monitor volume Adjust the monitor quiet (loud). too quiet (loud)? volume. The destination’s voice is Is the receiver volume Increase the receiver hard to hear on the too low? volume. external telephone receiver. Di2510f/Di3510f 14-13...
Page 508: Replacing The Completion Stamp
An optional TX Marker STAMP UNIT 2 is necessary. Replacing the Spare TX Marker STAMP 2 Pull the lever for the paper feed cover, and open it. Pull the lever for the setting guide, and open it. Remove the Spare TX Marker STAMP 2. 14-14 Di2510f/Di3510f...
Page 509 Troubleshooting Set the new Spare TX Marker STAMP 2. Replace the guide, and return the paper feed cover. Di2510f/Di3510f 14-15...
Page 510 Troubleshooting 14-16 Di2510f/Di3510f...
Page 511: Appendix
Appendix Appendix 15.1 Specifications Di2510f/Di3510f Specification Type Desktop Platen Fixed platen (mirror scanning) Photo conductor Copying system Digital laser copying Developing system MTHG developing method Fusing system Heat-roller-fixing system Resolution 600 dpi Document Types: Sheets, books Size: Maximum A3 L, Weight: 3 kg Paper types •...
Page 512 • Reduction ratios: ×0.816, ×0.707 and ×0.500 • Zoom ratios: ×0.250 to ×4.000 (in ×0.001 increments) Multiple copies 1 to 999 sheets (Di3510f) 1 to 99 sheets (Di2510f) Density control Automatic, manual and photo manual Image loss Leading edge: 4 mm; Trailing edge: 4 mm;...
Page 513: Duplexing Document Feeder Afr-19
Paper size A3 L, B4 L, A4 L/C, A5 L Power requirements Supplied by main unit Power consumption Less than 10 W Dimensions 89 mm (w) × 419 mm (d) × 358 mm (h) Weight About 2.2 kg Di2510f/Di3510f 15-3...
Page 514: Switchback Unit Sb-1
Paper capacity 500 sheets (80 g/m ) × 2 drawers Power requirements Supplied by main unit Power consumption Less than 15 W Dimensions 570 mm (w) × 548 mm (d) × 263 mm (h) Weight About 27 kg 15-4 Di2510f/Di3510f...
Page 515: Large Capacity Cabinet Pf-122
Paper size A4 C Paper capacity 2,500 sheets (80 g/m Power requirements Supplied by main unit Power consumption Less than 45 W Dimensions 570 mm (w) × 564 mm (d) × 263 mm (h) Weight About 26 kg Di2510f/Di3510f 15-5...
Page 516: Built In Finisher Fn-117
319 (435) mm (w) × 558 mm (d) × 573 mm (h) (The values within parentheses are the measurements with a media tray installed.) Weight About 21.4 kg (including the horizontal transport unit) Accessories 1 staple cartridge MS-5D (5,000 staples) 15-6 Di2510f/Di3510f...
Page 517: Additional Bin Kit Ak-1
4 Holes Paper size A3 L, A4 L/C Paper type Plain paper, recycle paper (60 g/m ~163 g/m Power requirements Supplied by finisher Dimensions 114 mm (w) × 461 mm (d) × 136 mm (h) Weight About 1.9 kg Di2510f/Di3510f 15-7...
Page 518: Saddle Kit Sk-1
~210 g/m Paper size A3 L, A4 L/C Paper capacity JS-203: 100 sheets (80 g/m Main unit’s output tray: 250 sheets (80 g/m Dimensions 450 mm (w) × 443 mm (d) × 75 mm (h) Weight About 1.7 kg 15-8 Di2510f/Di3510f...
Page 519: Care Of The Machine
Note Pressing too hard on the operation panel or the touch panel may damage them. In addition, never use mild household detergent or glass cleaner to clean the operation panel or touch panel. Di2510f/Di3510f 15-9...
Page 520: Original Glass
Appendix Original glass Clean the original glass by wiping it with a soft, dry cloth. 15-10 Di2510f/Di3510f...
Page 521: Function Combination Table
Appendix 15.3 Function Combination Table Di2510f/Di3510f 15-11...
Page 522 Appendix 15-12 Di2510f/Di3510f...
Page 523 Appendix Di2510f/Di3510f 15-13...
Page 524: Function Combination Codes
These functions cannot be selected if the document is fed through the duplexing document feeder. The function set later has priority. No warning message will appear. The function selected first is not performed. The setting changes according to the setting specified from the User’s Choice screen. 15-14 Di2510f/Di3510f...
Page 525 This setting cannot be selected since the setting cannot “Book” be selected. ■ A warning message should appear. ■ The settings can be selected, but either the function will automatically be cancelled or the function is not performed. Di2510f/Di3510f 15-15...
Page 526: Paper Size And Zoom Ratio Tables
Quarto 8 in. × 10 in. 203 mm × 254 mm Statement Invoice 5-1/2 in. × 8-1/2 in. 140 mm × 216 mm 4 in. × 6 in. 4 in. × 6 in. 102 mm × 152 mm 15-16 Di2510f/Di3510f...
Page 527: Zoom Ratios
× 2.000 105 mm × 148 mm × 1.414 4-1/4 in. × 5-3/4 in. × 1.733 × 1.224 × 0.816 257 mm × 364 mm × 0.577 10 in. × 14-1/4 in. × 0.707 × 0.500 × 1.154 Di2510f/Di3510f 15-17...
Page 528 279.4 mm × 355.6 mm Foolscap × 0.772 Letter × 0.772 Invoice × 0.500 Legal Foolscap × 0.928 8-1/2 in. × 14 in. Letter × 0.785 215.9 mm × 355.6 mm Invoice × 0.607 11 in. × 17 in. × 1.214 15-18 Di2510f/Di3510f...
Page 529 11 in. × 14 in. × 1.647 139.7 mm × 215.9 mm Legal × 1.545 Foolscap × 1.529 Letter × 1.294 Zoom ratio = Paper size/Document size 1 in. (inch) = 25.4 mm 1 mm = 0.0394 in. (inch) Di2510f/Di3510f 15-19...
Page 530: Consumables
Note Only use toner that has been manufactured specifically for this machine. Do not throw away the used toner cartridges. Instead, keep them in their boxes to be collected by your service representative. 15-20 Di2510f/Di3510f...
Page 531: Staple Cartridges
Appendix Staple Cartridges MS-5D for the finisher Staples for staple binding 5,000 staples are provided in the staple cartridge. MS-2C for the saddle kit Staples for staple binding 2,000 staples are provided in the staple cartridge. Di2510f/Di3510f 15-21...
Page 532: Should Power Failure Occurs
Call can, however, be received if the machine is equipped with an Extra Telephone Set. If an Extra Telephone Set that is usable even during power failure is connected, it can be used for making and receiving calls. 15-22 Di2510f/Di3510f...
Page 533: List Of Terms
It is possible to transmit the document as is, after talking with the destination on the phone. Memory This records the faxed and copied image data. It is possible to collect more memory in the data by installing more memory. Di2510f/Di3510f 15-23...
Page 534 It is possible to use a service using a touch-tone signal even on an analog line by pressing the [ ] key on the ten-key pad. 15-24 Di2510f/Di3510f...
Page 535 Appendix Term Explanation Transmission Post When sending documents to the same destination, accumulate the multiple documents, and batch transmit then at a designated time and time interval. See “User Manual/Applications”. Di2510f/Di3510f 15-25...
Page 536: Index
Automatic fax reception ..............6-19 Automatically selecting the paper source ........... 8-6 Available functions and settings ............4-18 Basic copy operations ................ 5-2 Basic screen ..................6-1 Copy screen .................. 6-6 FAX and copy screen ..............6-1 Fax screen ..................6-2 15-26 Di2510f/Di3510f...
Page 537 Copy key ..................4-1 Enlarge key ..................4-2 Extra Scan key ................4-1 Fax/Scan key .................4-1 Interrupt key ...................4-2 keypad ...................4-2 Mode Check key ................4-2 Panel Reset key ................4-2 Pause key ..................4-1 Start key ..................4-2 Stop key ..................4-2 sub power switch ................4-1 Di2510f/Di3510f 15-27...
Page 538 Document output tray ............... 1-16 Document pad .................. 1-13 Document scales ................1-14 Double-2in1 ..................10-20 Double-4in1 ..................10-21 Double-sided .................. 10-20 Double-sided transmission ............... 6-43 Drawer priority .................. 7-11 Drawer release button ............... 1-18 Duplex unit ................1-13 15-3 15-28 Di2510f/Di3510f...
Page 539 Feeding the document ................9-1 duplex document feeder ..............9-5 File margin ..................5-15 Finisher ....................1-8 Forwarding list .................11-44 Front door ..................1-11 Function combination table .............15-11 General documents ................6-67 Group ....................10-2 Hard disk drive ..................1-9 Hole punch ..................10-3 Hole punch setting ................10-8 Di2510f/Di3510f 15-29...
Page 540 ..............8-10 paper drawer ................. 8-8 Lower-right door ................1-18 Lower-right door release lever ............1-16 Mail bin ..................... 1-17 Mail bin kit ................. 1-9 15-7 Making copies using accounts ............5-6 Manual reception ................6-59 15-30 Di2510f/Di3510f...
Page 541 One-Touch Lists ................11-35 One-touch number ................6-31 Onscreen notations ................6-8 Operating environment ..............2-17 Orig. > Copy settings ..............10-20 specifying ...................10-23 Original cover kit ..................1-7 Original glass ..................1-13 Output tray ..................7-26 Output tray cover ................1-17 Overhead projector transparencies ...........8-1 8-13 Di2510f/Di3510f 15-31...
Page 542 Password reception ................6-58 Password transmission ..............6-53 Performing TX-prioritized ..............6-47 Plug-In counter ................. 7-19 Polling reception ................6-62 Polling reception programs ............. 11-18 Polling transmission ................6-56 Portrait ....................1-4 Positioning documents original glass ................. 9-9 15-32 Di2510f/Di3510f...
Page 543 ................13-8 Replacing the toner bottle ..............13-2 Report output ..................12-52 Reports ....................11-30 Right-side door ..................1-11 Right-side door release lever ............1-11 Saddle kit ...................1-9 15-8 Scanner dry ..................7-29 Screen tabs ..................4-18 Search ....................6-32 Selected settings ................4-18 Separate scan ...................5-28 Di2510f/Di3510f 15-33...
Page 544 Transmission ................... 12-28 Transmission stamp ................ 14-14 Transmission stamp unit ..............1-19 Transmitting 2in1 ................6-42 Tray extension ................... 1-11 TSI names ..................12-24 Turning the machine on and off ............4-9 TX report ..................12-53 TX rotation ..................6-45 15-34 Di2510f/Di3510f...
Page 545 Appendix Useful operations ................3-1 Verifying reception activity ..............6-29 Verifying transmission activity ............6-28 Watermark ..................5-23 X/Y zoom setting ................10-19 Zoom ratios ..................15-17 Zoom setting ...................10-14 Di2510f/Di3510f 15-35...
Page 546 Appendix 15-36 Di2510f/Di3510f...

This manual is also suitable for:

Di3510f

Minolta Di2510f Advanced Information

1 Introduction

2 Safety Information

3 Available Features

4 Before Making Copies

5 Copy Operations

6 Fax Operations

7 Utility Mode Operations

8 Copy Paper

9 Original Documents

Quick Links

Related Manuals for Minolta Di2510f

Summary of Contents for Minolta Di2510f