Table of Contents
Advertisement
JAM CODE LIST
Jam
Classification
code
PK-1
J72-40
J72-41
J72-43
J72-44
J72-45
J72-46
J72-47
J72-48
FN-104/
J72-81
FN-4
J72-82
J72-83
Cause
PS1(passage) is not turned ON
within the specific time after
leading/trailing/side edge PS on
paper edge PS is turned ON.
PS1(passage) is not turned ON
within the specific time after it
turned ON.
PS5 (punch HP) is not turned ON
within the specific time after MC1
(punch clutch) is turned ON.
PS8 (exit) is not turned ON within
the specific time after leading/
trailing/side edge PS on paper
edge PS is turned ON.
PS8 (exit) is not turned ON within
the specific time after the main
body paper exit PS is turned ON
(Non-Punch mode).
PS8(passage) is not turned OFF
within the specific time after it turned
ON (Non-Punch mode).
Remaining paper detected in PU
without the spacific time after PU
recives stop operetionsignal from
the main body.
Side edge PS correspond to the
paper size is not turned ON within
the specific time after leading/trailing
/side edge PS on paper edge PS is
turned ON (Punch mode).
PS33(clincher HP/F) and PS34
(stapler HP/F) are not turned ON
within the specific time after M23
(clincher F) and M24(stapler F) go
ON.
PS30(clincher HP/R) and PS31
(stapler HP/R) are not turned ON
within the specific time after M21
(clincher R) and M22(stapler R) go
ON.
PS30(clincher HP/R), PS33
(clincher HP/F), PS31(stapler HP/
R) and PS34(stapler HP/F) are not
turned ON within the specific time
after M21(clincher R), M23(clincher/
F), M22(stapler R) and M24(stapler/
F) go ON.
4 - 40
Machine response
Countermeasure
PU/main body stops
Remove jammed
immediately.
paper from PU/main
body.
FNS/main body stops
Remove jammed
immediately.
paper from FNS/main
body if present.
Advertisement
Table of Contents
