Pm Count Resetting - Minolta DI750 - MANUAL SERVICE Service Manual

25 ADJUSTMENT
3. Setting the wide paper
Step Operation
1 Enter the 25 mode.
2 [25 Mode Menu Selection]
Select Paper size setting.
2
3 [Paper Size Setting Mode Screen]
Press the Wide size paper
4 Press the or
wide paper size.
5 Press the
Input size
6 [Paper Size Input Screen]
Press the key for specifying the main (ver-
tical) scanning direction to display it in
reverse.
7 Press the or
to enter the size in the main (vertical)
scanning direction. Max. 314 mm
8 Press the button for specifying the sub
(horizontal) scanning direction to display
it in reverse.
9 Press the or
to enter the size in the sub (horizontal)
scanning direction. Max. 223 mm (C-
305), 459 mm (C-305L)
10 Press the key to finish setting.
OK
To cancel the new setting, press the
key.
CANCEL
Pressing either key will display the 25
Mode Menu screen again.
Reference 1:
Each time the current tray size is changed on this
screen, the new setting will be written into the
non-volatile memory.
key.
key to select a
key.
key or numeric keys
key or numeric keys

[4] PM Count Resetting

Care should be taken not to reset the PM count by
mistake.
Step
1 Enter the 25 mode.
2 [25 Mode Menu Screen]
Select "
3 [PM count/cycle Screen]
Press the
4 [Reset Confirmation Screen]
Press the
The PM count is reset and the start date
is input automatically.
Pressing the
set Confirmation screen at once.
5 Press the
To cancel the new setting, press the
CANCEL
Pressing either button will display the 25
Mode Menu screen again.
1 - 20
Operation
PM count."
3
button.
COUNT RESET
button.
YES
button closes the Re-
NO
button to finish setting.
OK
button.