Table of Contents
Advertisement
SAFETY AND IMPORTANT WARNING ITEMS
3. Soak a small amount of either ethyl alcohol or
isopropyl alcohol into a clean, unused dust-free
cotton pad which has been folded over into
quarters. Now, wipe the surface of the PC Drum
in one continuous movement from its rear edge
to its front edge and off its surface one to two
times.
* Never move the pad back and forth.
4. Using the SAME face of the pad, repeat the
procedure explained in the latter half of step 3
until the entire surface of the PC Drum has been
wiped. Always OVERLAP the areas when wiping.
Two complete turns of the PC Drum would be
appropriate for cleaning.
5. Finaly, genllyw wipe the entire surface of the PC
Drum.
C - 8
Advertisement
Table of Contents
