Table of Contents
Advertisement
[3] Setting the Paper Size
When the LCT paper type is changed, it must be stored
in the main unit. This setting is effective when an op-
tional LCT is added.
Select a paper size among standard, non-standard paper
sizes. After selecting a tray size, specify a paper size.
1.
Setting the standard size
Step
1
Enter the 25 mode.
2
[25 Mode Menu Screen]
Select "
Paper size setting."
2
3
[Paper size setting mode]
Press the
STD SIZE
4
Press the
paper size.
5
Press the
OK
To cancel the new setting, press the
key.
CANCEL
Pressing either key will display the 25
Mode Menu screen again.
Operation
key.
or
button to select a
key to finish setting.
2.
Setting the non-standard size
Step
1
Enter the 25 mode.
2
[25 Mode Menu Screen]
Select "
3
[Paper Size Setting Screen]
Press the
4
Press the key for specifying the main
(vertical) scanning direction to display it
in reverse video.
5
Press the
keys to enter the size in the main
(vertical)scanning direction. Max. 314
mm
6
Press the key for specifying the sub (hori-
zontal) scanning direction to display it in
reverse.
7
Press the
to enter the size in the sub (horizontal)
scanning direction. Max. 223 mm (C-
305), 459 mm (C-305L)
8
Press the
To cancel the new setting, press the
CANCEL
Pressing either key will display the 25
Mode Menu screen again.
1 - 19
25 ADJUSTMENT
Operation
Tray Size Setting."
2
key.
Non STD size
or
key or numeric
or
key or numeric keys
key to finish setting.
OK
key.
Advertisement
Table of Contents
