Simons Voss Technologies SmartRelay 3 Manual page 27

SmartRelay 3 system (Manual)
21. Select "USB link to the TCP nodes" in the programming window.
22. Click on the Programming button.
9 Programming launches.
23. Wait for programming.
24.Use | Network | to select the
25. If you have created more than one communication node, change to the
communication node you have just created. Use the
buttons.
26.Terminate the SimonsVoss VNHost Server or SimonsVoss CommNode
Server service.
27. Click on the Config files button.
28.Open Windows services.
29.Save the service's configuration files locally on your computer.
Communication nodes
8. Setting up
27 / 189
entry.
or and or