Simons Voss Technologies SmartRelay 3 Manual page 140

SmartRelay 3 system
10.13 Firmware update
(Manual)
3. Select the SREL3 ADV system controller.
4. Open the ▼ Type drop-down menu.
5. Select the "TCP nodes" item.
6. Open the ▼ Device drop-down menu.
7. Select the IP address if required.
8. Select the remote unlocking option.
9. Click on the Execute button.
9 Relay switches in the controller.
"Programming successful" window is displayed.
9
SimonsVoss products are kept up to date and maintained at all times. It
may be necessary to enable new functions to install a new firmware
version.
Firmware updates are a complex affair which require detailed specialist
knowledge. Contact our Support to install any firmware updates (see Help
and contact). The controller may need to reset the controller.
IMPORTANT
Bricking due to firmware update being interrupted
The firmware is also responsible for resetting. If the firmware is partly over-
written and the process is interrupted (connection is cut or the power sup-
ply fails), it may no longer be possible to address or reset the device as a
result of what is known as bricking.
1. Ensure that the power supply is stable during the firmware update.
2. Ensure that the power supply is not interrupted during the firmware
update.
3. Ensure that the connection is not interrupted during the firmware
update.
10. SREL3 ADV in LSM
140 / 189