Simons Voss Technologies SmartRelay 3 Manual page 106

SmartRelay 3 system
10.2.1.2 Reading the access list over network
(Manual)
4. Select the "USB link to the TCP nodes" item.
5. Click on the Read button.
9 "G2 SmartRelay 3" window opens.
6. Click on the Read button.
7. Click on the Audit Trail button.
9 Access list is displayed.
Proceed as follows if you wish to read the access list using a network
connection:
Components wired correctly (see
ü
ü Components connected to power.
Controller has already been programmed.
ü
Controller connected to computer via network.
ü
1. Mark the entry on the SmartRelay 3 controller in the matrix.
10. SREL3 ADV in LSM
wiring [ 58] ).
}
106 / 189