Simons Voss Technologies SmartRelay 3 Manual page 139

SmartRelay 3 system (Manual)
5. Select the "USB link to the TCP nodes" item.
6. Open the ▼ Device drop-down menu.
7. Select the IP address if required.
8. Select the remote unlocking option.
9. Click on the Execute button.
9 Relay switches in the controller.
9 "Programming successful" window is displayed.
Remote opening via TCP/IP
Controller has already been programmed.
ü
Components wired correctly (see
ü
ü Components connected to power.
1. Use | Network | to select the
9 The "Activate network locks" window will open.
2. Open the ▼ Door/lock drop-down menu.
10. SREL3 ADV in LSM
wiring [ 58] ).
}
Lock activation item.
139 / 189