Simons Voss Technologies SmartRelay 3 Manual page 153

SmartRelay 3 system
12.1.2 Reading the battery level over network
(Manual)
3. Open the ▼ Type drop-down menu.
4. Select the "USB link to the TCP nodes" item.
5. Click on the Read button.
Locking device is read.
9
Battery level is displayed in the "State" section.
9
9 Battery level is displayed in the "State during last read-out" section in
the [State] tab in properties.
Components connected to power.
ü
ü Controller connected to computer via network.
Battery to be checked inserted.
ü
1. Mark the entry on the SmartRelay 3 controller in the matrix.
12. Maintenance
153 / 189