Simons Voss Technologies SmartRelay 3 Manual page 114

SmartRelay 3 system
10.7.1 Specifications for the serial interfaces with CLS
(Manual)
4. Open the ▼ Interface drop-down menu.
5. Select the entry which corresponds to your third-party system.
6. Click on the OK button.
Window closes.
9
7. Click on the Apply button.
8. Click on the Exit button.
9. Execute programming (see
Data are emitted via the serial interface.
9
Your SmartRelay is not only able to read identification media and switch a
relay, but also serve solely as a reader for identification medium data. This
data comprises:
Customer ID or locking system ID

Transponder ID

The identification medium data read is then forwarded to third-party
systems via a serial interface in various data formats. Examples of such
external systems:
Attendance recording systems

Programming [ 29] ).
}
10. SREL3 ADV in LSM
114 / 189