Simons Voss Technologies SmartRelay 3 Manual page 177

SmartRelay 3 system (Manual)
Power supply


Screw terminals


Ambient conditions

Temperature
range

Humidity Max. 90%, non-condensing
Interfaces
Acts as an interface to the SREL3 ADV system control-
ler.
RS485


Signal
1 RGB
LED
8 green
Relay
Quantity 8x, programmable separately from one another
Switching modes Monoflop
Switching inter- Programmable between 1 s and 25 s (except 0 s, as on
val controller).
Contact type 1x NO
Contact material AgNi+Au
Service life (elec-
12 V
trics)
Service life
Typically 100 × 10
(mechanical)
Bounce time Typically 1 ms, max. 3 ms
15 G for 11 ms, 6 shocks as per IEC 68-2-27; not tested
Vibrations
for permanent operation under vibration
AUX relay
Max. 24 V
switching voltage
V : 12 V (11 V –15 V
IN DC DC
Standby current: < 120 mA
Max. current: < 150 mA
Reverse voltage protection: yes
0 °C to +60 °C (operation)
0 °C to +70 °C (in storage > 1 week)
Number of ports: 1
Length: ≤ 150 m, max. distance 300 m (depending
on firmware and cabling)
/ 10 mA: typ. 5 × 10
DC
6
switching cycles
14. Technical specifications
)
DC
7
switching cycles
177 / 189