Simons Voss Technologies SmartRelay 3 Manual page 157

SmartRelay 3 system
13. Fault rectification
13.1 Resetting components
13.2 Broadcast error
(Manual)
You can reset the controller (see
NOTE
Only the hardware settings and access lists on the controller are reset. The
IP setting remains unchanged
You can reset the software in LSM (see
Unavailable service
A frequent cause of transmission errors in programming is an unavailable or
ended service. Check whether the service is running.
If you use a virtual network, the VN host server must be operation.

If you use the SmartRelay in a network and evaluate inputs, the

CommNode server must be in operation.
If you are not sure, check both services:
ü Controller has already been programmed.
Components wired correctly (see
ü
ü Components connected to power.
1. Press the Windows key.
2. Enter services .
3. Right-click on the displayed entry to open the context menu.
4. Select the Run as administrator
5. Enter your user name and your password if necessary.
The Windows "Services" window will open.
9
6. Look for the following services: SimonsVoss CommNode Server and/or
SimonsVoss VNHost Server.
Resetting the controller [
Software reset [
wiring [ 58] ).
}
item.
13. Fault rectification
157 / 189
33]
).
}
133]
).
}