Table of Contents
Advertisement
Setting System Board
6
Jumpers
This chapter provides jumper setting information for
configuring your system for a particular system
requirement. Situations that require changing the jumper
settings include the following:
T
You are upgrading your processor
T
BIOS recovery
T
You are clearing the system board CMOS
T
You want to deny access to CMOS Setup
T
You are resetting your password.
Jumpers are set correctly at the factory for your
configuration.
If your system requires a jumper change, change
only the setting for that condition. Otherwise, keep
the settings at their factory settings.
!
CAUTION
Setting System Board Jumpers 6-1
Advertisement
Table of Contents
