Setting System Board Jumpers - NEC POWERMATE P ETC User Manual

Setting System Board
5
Jumpers
This chapter provides jumper setting information for
configuring your system for a particular system
requirement. Situations that require changing the jumper
settings include the following:
T
You are upgrading your processor.
T
You have interrupted the Flash utility during a BIOS
upgrade.
T
You want to clear all customized CMOS settings back
to the factory defaults.
T
You want to deny access to the Setup utility.
T
You forgot your password and cannot boot your system.
T
You require more system resources.
Jumpers are set correctly at the factory for your
configuration.
If your system requires a jumper change, change
only the setting for that condition. Otherwise, keep
the settings at their factory settings.
!
CAUTION

Setting System Board Jumpers 5-1