Setting System Board Jumpers - NEC POWERMATE ENTERPRISE - 10-1997 Manual

Setting System Board
6
Jumpers
The system board jumper enables you to configure your
system for a particular system requirement.
Conditions that require changing jumper settings include the
following situations:
T
You forgot your password and cannot boot your system.
You need to set a jumper to "clear" your current
password (see "Clearing Your Password").
T
Your BIOS has become corrupted and you must perform
a BIOS Recovery. This entire procedure is performed in
conjunction with a BIOS Recovery diskette. This
procedure is seldom required; if it is, see the instructions
that are provided with the diskette.
You can obtain the BIOS Recovery program by
downloading it to a diskette from the NECCSD Bulletin
Board System (BBS) or the NECCSD File Transfer
Protocol (FTP) site. See "NECCSD Bulletin Board
System" in Chapter 7 for information on how to
download files onto a diskette. See "Internet" in
Chapter 7 to access the NECCSD FTP site.

Setting System Board Jumpers 6-1