Legend Bar; Setup Key Functions - NEC POWERMATE VE - SERVICE MANUAL 08-1996 Service Manual

Legend Bar

Use the keys listed in the legend bar on the bottom of the Setup menu to make the
selections or exit the current menu. Table 2-1 describes the legend keys and their alternates.
Key
F1 or Alt-H
Esc
or arrow keys
or arrow keys
Tab or Shift-Tab
Home or End
Page Up or Page Down
- (minus)
+ (plus)
F9
F10
Enter
Alt-R
T
Selecting a Menu Item
To select a menu item, use the up or down arrow keys to move the cursor to the
desired field.
Use the tab key to cycle the cursor through the options.
Then use the value keys (F5, - , F6, +, or space bar) to cycle through the value for
that field. The Save Values command in the Exit Menu saves the values currently
displayed in all the menus.
T
Displaying a Submenu
To display a submenu, use the arrow keys to move the cursor to the desired
submenu. Press
submenus.
Table 2-1 Setup Key Functions
Function
Displays General Help window (described later in this section).
Exits the menu.
Selects a different menu.
Moves cursor up and down.
Cycles cursor up and down.
Moves cursor to top or bottom of window.
Moves cursor to next or previous page.
Selects the Previous Value for the field.
Selects the Next Value for the field.
Loads the Default Configuration values for this menu.
Loads the Previous Configuration values for this menu.
Executes a command or selects submenu.
Refreshes screen.
. A pointer (a right-pointing triangle) marks all selectable
Enter
Setup and Operation 2-9