Cd-Rom Reader; Speakers; Microphone - NEC POWERMATE VE - SERVICE MANUAL 08-1996 Service Manual

1-16 Technical Information
T
built-in 16-bit 128x oversampling Sigma-Delta Stereo Codec with 85dB S/N ratio
T
built-in five-channel 16/32 step MPC compatible stereo mixer with master volume
and sample rates up to 48 Hz stereo
T
dual DMA channel and built-in FIFOs for full duplex simultaneous playback and
record in 16-bit stereo
T
WaveBlaster upgradeable for Wavetable synthesis
T
3D sound effects
T
20 voice FM synthesis.
The integrated components are compatible with the Sound Blaster™ board and the
®
Microsoft Windows Sound System™ board. The components work with the preinstalled
Voyetra multimedia sound software.

CD-ROM Reader

The eight-speed IDE CD-ROM reader is preinstalled as drive E on multimedia
configurations. The reader can be used to load programs from a CD or it can be used to
play audio CDs. The reader operates at different speeds depending on whether the CD
contains music or data. The reader is fully compatible with Kodak Multisession Photo
CDs™ and standard CDs. The reader is set as the master device on the secondary IDE/PCI
connector port.

Speakers

The multimedia systems come with 8 watt high-quality Goldtron stereo speakers, an AC
adapter, and connecting wires. The speaker set features treble, bass, and volume controls,
power on/off switch, power lamp, and a headphone jack. Volume is controlled from the
speaker or from the preinstalled sound system software. The speaker set connects to the
speaker line out jack on the back of the system.

Microphone

The Goldtron microphone that comes with the multimedia systems allows recording of
voice and sound into computer data files. The microphone connects to the MIC jack located
on the back of the system. The microphone works in conjunction with the audio software
shipped with the system.