Expansion Board Guide Removal; Locating The Internal Speaker - NEC PowerMate Professional 9000E Series Service Manual

A – Front of Chassis B – Internal Speaker
3. Label and disconnect the speaker cable from the system board.
4. Slide the speaker upwards and out of the three tabs to remove it from the
chassis.

Expansion Board Guide Removal

Remove the expansion board guide as follows.
1. Power off the system and remove the left side cover and the front panel as
described earlier in this section.
2. Locate the board guide on the front inner wall of the chassis.
3. Press the top and bottom sides together to release the locking tabs securing
the board guide to the chassis.
4. Pull the board guide away from the chassis wall and out of the chassis.
3-26 Disassembly and Reassembly

Locating the Internal Speaker